triumphs (date)
May 31, 2001
- Early TR4 electric question, Gary Allgood, 21:20
- Re: Vinyl Tonneau Cover Repair, Michael Thompson, 20:55
- Vinyl Tonneau Cover Repair, GGanoung, 20:29
- Re:, Rosspemlee, 20:24
- TR6 Caliper Squeak, levilevi, 19:24
- Kengold-Reflex Labels x-mac-creator="4D4F5353", bob, 18:31
- OD adapter plate, Ronnie Babbitt, 17:28
- Re: The Ultimate Compliment? idiots at the light, Scott A. Roberts, 17:07
- Re: TR4 (early): radiator duct (air deflector) project, tr6nut, 16:37
- Re: TR4 (early): radiator duct (air deflector) project, Don Sforza, 16:35
- TR4 (early): radiator duct (air deflector) project, Steven Newell, 16:16
- Re: British Cars by the Sea-Waterford, CT, Don Sforza, 15:29
- Re: Dumb Question, Jacking tr6, Martin Secrest, 15:16
- RE: Dumb Question, Jacking tr6, Eric Conrad, 15:14
- Dumb Question, Jacking tr6, Matt Ritter, 14:56
- British Cars by the Sea, Dennis N Culligan, 14:14
- RE: TR3-4 Clutch Push Rod, Brian Sanborn, 13:32
- Re: The Ultimate Compliment?, TAYLOR,KEITH M (HP-Corvallis,ex1), 13:32
- Fw: The Ultimate Compliment? idiots at the light, David Massey, 12:18
- polishing vinyl, sujit roy, 12:14
- [no subject], John Macartney, 10:56
- Re: Chamoisesesses, John Macartney, 10:56
- compliments, Fred Thomas, 10:35
- RE: The Ultimate Compliment? idiots at the light, David A. Templeton, 10:10
- Fw: The Ultimate Compliment? idiots at the light, Ptegler, 10:03
- Re: [TR250] flywheel lightening, Erik Quackenbush, 09:45
- Re: The Ultimate Compliment?, Steven Newell, 09:16
- Re: The Ultimate Compliment?, David Massey, 08:30
- Old Rag Top, Bill Pugh, 07:54
- Re: Fw: virus ->HOAX<-, Fred Marks, 07:53
- RE: British Cars by the Sea-Waterford, CT, Brian Sanborn, 07:10
- Fwd: REBUILD A TR?, alan jones, 06:30
- Triumphs@Autox.team.net daily digest V1 #566, Anthony Rhodes, 06:04
- TR3 Drive Shaft Gasket, suhring, 04:40
- Stupid Question on Carbs, Dan John, 03:00
- Re: [VWofT] Fw: virus, Rave Racer, 02:27
- Fw: virus, Rave Racer, 01:58
- Exhaust Gas Analyzer - Thanks, Steve Nabors, 01:02
- Re: The Ultimate Compliment?, Mark J Bradakis, 01:02
May 30, 2001
- TR4A cylinder head needed..., Eric Miller, 23:14
- Re: The Ultimate Compliment, LaJoMor, 22:57
- Re: The Ultimate Compliment?, Scott A. Roberts, 22:34
- Battery for TR3A, Nancy and Bob Wise, 21:54
- * TR3A Website *, Hotmail, 21:28
- differential repair, CarlSereda, 20:54
- Re: British Cars by the Sea-Waterford, CT, Don Sforza, 20:27
- OD Update, Ronnie Babbitt, 20:17
- Whistling TR6 Revisited, Rick Murray, 19:55
- Re: The Ultimate Compliment?, GreenBugeye, 19:47
- Re: differential repair, Bill Kelly, 19:34
- Re: Exhaust gas analyzer useage on LBCs, levilevi, 19:25
- The Ultimate Compliment, Jim, 19:24
- Re: The Ultimate Compliment?, LaJoMor, 19:14
- Re: a stupid question re chamoiseseses, LaJoMor, 19:05
- Re: The Ultimate Compliment?, bob, 19:00
- TR3-4 Clutch Push Rod, suhring, 18:53
- British Cars by the Sea-Waterford, CT, Michael Ferguson, 18:33
- [TR250] flywheel lightening, David Brady, 18:08
- The Ultimate Compliment?, Jim, 17:21
- Re: OD leak, TR250Driver, 17:06
- differential repair, Tim Gaines, 16:00
- Autocrossing help, jmlozano, 15:04
- TR2-TR3 NEW seat covers For sale, RX74EVR, 14:49
- Re: Looking for TR3 blueprints or tech drawings, Erik Quackenbush, 14:18
- Looking for TR3 blueprints or tech drawings, Drew Rogge, 14:02
- RE: Radiator.com, David A. Templeton, 13:33
- Radiator.com, David A. Templeton, 13:13
- Re: OD leak, Mike Kitchener, 13:05
- Re: another question for the suspension gurus, Joe Curry, 12:37
- Re: fuel tank, David Massey, 12:31
- Re: another question for the suspension gurus, Martin Secrest, 12:29
- another question for the suspension gurus, Douglas Frank, 12:18
- Re: TR3 - How to hook up to tow ? http://netwinsite.com/top_mail.htm, Phil Ethier, 11:45
- RE: Exhaust gas analyzer useage on LBCs, January Williams, 11:39
- RE: fuel tank, Randall Young, 11:22
- Re: I'm retracting my dumb chamois question, Fred Thomas, 11:09
- Re: Exhaust gas analyzer useage on LBCs, Erik Quackenbush, 11:03
- Transporter to Breckenridge, Bill Pugh, 10:56
- Re: fuel tank, Phil Smith, 10:50
- RE: fuel tank, Eric Conrad, 10:34
- re: Vendor Report - Prestige (long), HAMILTON DOUG, 09:38
- Re: a stupid question re chamoiseseses, Bill Pugh, 09:38
- I'm retracting my dumb chamois question, Boothroyd, Frank, 09:31
- fuel tank, David Massey, 09:18
- a stupid question re chamoiseseses, David Massey, 09:18
- Re: a stupid question re chamoiseseses, Joe Curry, 09:14
- Re: TR3 - How to hook up to tow ?, Dan Buettner, 09:11
- TR3 - How to hook up to tow ?, David Massey, 08:56
- RE: OD leak, Brian Sanborn, 07:30
- Re: TR3 - What are holes in dash for ?, Ptegler, 07:00
- OD leak, Ronnie Babbitt, 06:06
- brake fitting thread size, a Wallace, 06:00
- a stupid question re chamoiseseses, Boothroyd, Frank, 05:54
- RE: .750" wheel cylinders and rocker pedestal failure, Peter Zaborski, 03:42
- RE: Exhaust gas analyzer useage on LBCs, Peter Zaborski, 03:42
May 29, 2001
- RE: Exhaust gas analyzer useage on LBCs, Biedermann, Frank (SSABSA), 22:23
- Re: TR3 Brake/Clutch Mast Cyl same ?, Tr3bob, 22:12
- RE: TR3 - What are holes in dash for ?, Musson, Carl, 22:06
- Exhaust gas analyzer useage on LBCs, Steve Nabors, 22:06
- Tr3 fan balance, Robert Burnett, 21:31
- Re: .750" wheel cylinders and rocker pedestal failure, BOB KRAMER, 21:15
- fuel tank, Phil Smith, 21:02
- TR3 - How to hook up to tow ?, Pat, 20:55
- TR3 - What are holes in dash for ?, Pat, 20:55
- RE: .750" wheel cylinders and rocker pedestal failure, Hugh Barber, 20:06
- Throw-out bearing failures, Petearales, 20:01
- RE: Backfire??, S Twigg, 19:37
- Whistling TR6, Rick Murray, 18:24
- Re: brake fitting thread size, Roger Ryan, 17:44
- Throw-out bearing failures, Randall Young, 17:05
- TR6 Differential Pinion Seal, David Massey, 16:21
- leaky rear (not an Imodium story), Mark Hooper, 14:14
- Re: More news RE: Alternator help needed, Adrian, 13:49
- TR6 Differential Pinion Seal, Arakelian, Peter, 13:09
- FW: AAA gas prices: Retail vs. Wholesale vs. Crude...., Randall Young, 11:45
- beautiful, Fisher, ED, 10:13
- Re[2]: Vendor Report - Prestige (long), Richard R Olson, 10:07
- RE: Vendor Report - Prestige (long), Musson, Carl, 09:40
- canvas tops, Arakelian, Peter, 09:36
- Vendor Report - Prestige (long), Richard R Olson, 09:33
- RE: TRF price list, Musson, Carl, 08:54
- brake fitting thread size, wallaces, 08:09
- Re: Oil cooler comments and mounting issues, Mike Kitchener, 07:48
- Oil cooler comments and mounting issues, Ptegler, 07:18
- Re: TRF price list, Don Sforza, 07:14
- TRF price list, George Richardson, 07:08
- Re: What's Whistling?, Don Sforza, 05:04
- What's Whistling?, jay_welch, 04:23
- TR-3A pedal box assembly wanted, john matthews, 01:27
- Re: brake fitting thread size, Mark J Bradakis, 00:27
- In defence of parts purveyors, Michael Andrews, 00:11
May 28, 2001
- RE: Top this if you can...., Ken Gano, 23:37
- brake fitting thread size, Roger Ryan, 23:25
- Re: What's Whistling?, Joe Curry, 21:53
- Introduction, Tyler Buck, 21:29
- Re: What's Whistling?, bob, 20:49
- Re: What's Whistling?, Rosspemlee, 20:03
- RE: Not so LBC, David Massey, 20:00
- Diff seal replacement 71-TR6, David Massey, 20:00
- What's Whistling?, Rick Murray, 19:29
- Diff seal replacement 71-TR6, John Reynolds, 18:17
- Re: PI Conversion for TR6, J.H. Roulleaux, 17:10
- Re: TR6 fuel starvation, J.H. Roulleaux, 17:10
- Re: Seat belt Parking Devices, bob, 17:06
- RE: TR7 BFH Wheel wobble, Hugh Barber, 16:37
- Re: In defence of parts purveyors - long, Randall Young, 16:26
- re:Gearbox Cover plates, Anthony Rhodes, 16:18
- More news RE: Alternator help needed, Jim Altman, 15:58
- In defence of parts purveyors - long, John Macartney, 15:40
- AAA gas prices: Retail vs. Wholesale vs. Crude...., Musson, Carl, 15:27
- TR7 BFH Wheel wobble, Eganb, 14:23
- Looking for TS72015L, Dennis & Bridget Lambert (Unverified), 13:51
- RE: Not so LBC, Peter Zaborski, 13:50
- RE: canvas tops, Peter Zaborski, 13:48
- Not so LBC, Mark Hooper, 13:40
- canvas tops, Petearales, 13:06
- RE: f-f-f-fun!! (& top question), Brian Sanborn, 12:54
- paging peter cebalo, Peter Zaborski, 11:37
- Re: TR6 fuel starvation, Will, 11:13
- TR4A-new sills and floors, David Connitt, 10:26
- Re: Seat belt Parking Devices, KMNTR6, 09:34
- Re: f-f-f-fun!! (& top question), Rich White, 08:32
- f-f-f-fun!! (& top question), David Massey, 08:26
- Seat belt Parking Devices, David Massey, 08:26
- Oil Gusher From Dip Stick Tube, David Massey, 08:14
- Seat belt Parking Devices, Cliff Davies, 08:09
- Manifold gaskets, MPRICE, 07:40
- RE: f-f-f-fun!! (& top question), Mark Hooper, 07:38
- Re: Gearbox cover and overdrive, Irv Korey, 07:16
- Re: f-f-f-fun!! (& top question), Nelson Riedel, 07:02
- f-f-f-fun!! (& top question), Boothroyd, Frank, 06:14
- TR6 brake adjustment tool, jay_welch, 04:29
- Throwout bearing in TR6, jay_welch, 04:22
- Re: TR3 Brake/Clutch Mast Cyl same ?, Randall Young, 01:37
- [no subject], russell furzer, 00:09
May 27, 2001
- Re: Canvas protection, Michael Thompson, 20:18
- .75" brake cylinders, Hugh Barber, 20:02
- Engine Work In Atlanta, Doug Mathews, 20:01
- TR3-Fitting spare tire cover, Pat, 19:56
- TR3 Brake/Clutch Mast Cyl same ?, Pat, 19:56
- Re: Computer wheel alignment (was TR7BFH Inner Ball Joint installation), Kevin Andrews, 19:33
- Wanted: Spitfire/GT6 Driver side door assembly, Steve Reilly, 19:27
- RE: Gearbox cover and overdrive, MPRICE, 18:35
- Rimmer Brothers positive experience, Joseph R. Schneider, 18:20
- TR4A Brake M/C Question, Mark Meany, 17:32
- Re: One dumb question from my wife..., ZinkZ10C, 17:32
- overdrive oil, russell furzer, 16:24
- TR-6 Switches, Patrick Bitton, 16:11
- Canvas protection, David Templeton, 15:56
- TR3A Front brake rotor replacement question, datesmanaric, 15:06
- Re: Thanks from One dumb question from Bob, Rave Racer, 14:35
- Re: Alternator help needed - a bit more info, Rave Racer, 14:29
- TR6 fuel starvation, Paul Mitchell, 12:01
- Re: Alternator help needed, Jim Altman, 11:53
- Re: PI Conversion for TR6, Randall Young, 11:20
- Re: Thanks from One dumb question from my wife, Randall Young, 10:49
- RE: Oil Gusher From Dip Stick Tube, Williams, Bill (Atlanta), 10:12
- Re: Alternator help needed and desolation, Edward Woods, 10:11
- RE: TR3A Hood Seal, Justin Paxton, 09:44
- Re: Thanks from One dumb question from Bob, GreenBugeye, 09:33
- Supercharger info as promised, Sebastian King, 09:32
- Oil Gusher From Dip Stick Tube, Williams, Bill (Atlanta), 08:57
- RE: Alternator help needed - a bit more info, Jim Altman, 08:04
- Re: PI Conversion for TR6, Paul J. Burr, 07:34
- Alternator help needed, Jim Altman, 06:32
- Re: Thanks from One dumb question from my wife, bob, 06:29
- Re: TR4A Pinion Oil Seal Question, Bob Labuz, 06:21
- Re: PI Conversion for TR6, J.H. Roulleaux, 04:47
May 26, 2001
- Re: Wire Wheels (Spacers), Michael Hart, 22:15
- Re: Wire Wheels (Spacers), Michael Thompson, 21:01
- Re: Gearbox cover and overdrive, Nelson Riedel, 20:48
- TR4A Pinion Oil Seal Question, Mark Meany, 20:44
- Ignition switch problem, John Middlesworth, 20:14
- low generator output, Richard White, 20:03
- Gearbox cover and overdrive, Edward Woods, 19:54
- Re: One dumb question from my wife..., KHOCO, 19:51
- Re: One dumb question from my wife..., AKATR5, 19:41
- Re: One dumb question from my wife, TeriAnn Wakeman, 19:00
- test please delete, KHOCO, 17:02
- Picnic baskets, Adrian, 16:40
- one dumb question, lmtr4a, 15:41
- RARE TRIUMPH TR EMERGENCY WINDSCREEN, Frank J. Angelini Sr., 15:41
- TR3A Hood Seal, Justin Paxton, 15:01
- Re: Wire Wheels and spacers, Edward Woods, 14:58
- Re: Cobras (was One dumb question), Joe Curry, 14:45
- TR3 Starter Solenoid, Sumner Weisman, 14:40
- Re: Cobras (was One dumb question), Randall Young, 14:13
- Re: One dumb question from my wife, TeriAnn Wakeman, 14:00
- Re: One dumb question from my wife...x-mac-creator="4D4F5353", Joe Curry, 13:18
- Re: One dumb question from my wife...x-mac-creator="4D4F5353" http://netwinsite.com/top_mail.htm, Phil Ethier, 12:33
- Re: Fuel Injection, Total Advance Corporation, Randall Young, 12:32
- Re: Fuel Injection, Total Advance Corporation, Randall Young, 12:28
- Re: One dumb question from my wife...x-mac-creator="4D4F5353", David Templeton, 11:26
- Re: One dumb question from my wife... x-mac-creator="4D4F5353", TeriAnn Wakeman, 09:59
- Re: One dumb question from my wife...x-mac-creator="4D4F5353", Joe Curry, 09:19
- K & K Collector Car Insurance, TYGRTR3, 08:46
- Fwd: Re: What are they?, Doug Mathews, 08:43
- Rimmers Revisited, Andrew H. Litkowiak, 07:56
- Re: TR6 - Interior material question, Alan, 07:37
- rimmer bros, Alan, 07:10
- RE Dash Lights, Michael Hart, 06:17
- Wire Wheels, Michael Hart, 06:14
- Re: Reamer Brothers, Sebastian King, 06:13
- RE: dumb question, John A. Simmons, 06:01
- Re: One dumb question from my wife... x-mac-creator="4D4F5353", Adrian, 05:55
- One dumb question from my wife... x-mac-creator="4D4F5353", bob, 05:41
- Rimmer Bros., John A. Simmons, 05:32
- Re: Adjusting Herald door catches, John Macartney, 03:10
- Re: Reamer Brothers, Michael Hargreave Mawson, 00:37
- Re: What are they?, Michael Hargreave Mawson, 00:37
- Re: Another Ream-job by Rimmer?, Michael Hargreave Mawson, 00:35
May 25, 2001
- Re: Another Ream-job by Rimmer?, Adrian, 23:09
- Re: PI Conversion for TR6, GreenBugeye, 22:46
- RE: Dash Lights, Michael Hart, 22:40
- Re: Rad Caps for Tr2-3, Randall Young, 21:43
- Now I'm confused..., Scott A. Roberts, 21:18
- Rad Caps for Tr2-3, Robert Burnett, 20:43
- RE: Valve Numbers, Randall Young, 18:49
- Valve Numbers, Ct54531, 18:34
- Re: Reamer Brothers, Scott A. Roberts, 18:09
- Re: Another Ream-job by Rimmer?, Pat Mullen, 17:55
- Rain has its benefits, a Wallace, 17:38
- Reamer Brothers, Andrew H. Litkowiak, 17:31
- Re: Door catches - Herald, Graham Stretch, 17:22
- Re: Spitfire O/D driveshaft, Graham Stretch, 17:10
- Re: Rad caps TR 2-3, Bill Pugh, 16:22
- RE: Dash Lights, Randall Young, 16:08
- Re: Dash Lights, HAMILTON DOUG, 14:49
- Dinitrol rustproofing, ian.viles, 14:33
- Another Ream-job by Rimmer?, CarlSereda, 14:32
- RE: TR-6 and Negative Camber - data correction (very long), Lanoway, Brian, 14:31
- Re: TR-6 and Negative Camber - data correction (very long), Rob Christopher, 13:59
- TR-6 and Negative Camber - data correction (very long), Lanoway, Brian, 13:00
- RE: Rad caps TR 2-3, Randall Young, 12:50
- Rad caps TR 2-3, Angelo Graham, 12:38
- RE: TR-6 and Negative Camber, Jim Hill, 12:17
- Feeling old yet? (No LBC content), Mark Hooper, 12:05
- Re: TR 4, Michael Hart, 12:03
- Re: Computer wheel alignment (was TR7BFH Inner Ball Joint installation), Herald948, 12:02
- Re: rain & more rain http://netwinsite.com/top_mail.htm, Phil Ethier, 11:43
- Ebay Auctions, Rob C Swift, 11:37
- Re:TR6 - interior material question, Richard R Olson, 11:32
- Re: Computer wheel alignment (was TR7BFH Inner Ball Joint installation) http://netwinsite.com/top_mail.htm, Phil Ethier, 11:30
- Re: What are they?, GreenBugeye, 11:24
- Re: Computer wheel alignment (was TR7BFH Inner Ball Joint installation), Randall Young, 10:53
- re: Door catches - Herald, john matthews, 10:48
- Re: TR4 badges overheating, Bill Pugh, 10:09
- What are they? <LxVf5jpHTJ4KxZf4nSFlqLdH9U>, Michael Hargreave Mawson, 10:01
- TR6 - Interior material question, Richard R Olson, 09:56
- Re: Forever Black Tire Gel, LaJoMor, 08:51
- Re: TR4 badges overheating, Matt Ritter, 08:39
- Re: TR4 badges overheating, GreenBugeye, 08:25
- Replacing Lucas Alternator on 78 Spit, Coop, Michael L, 08:19
- Re: TR 4, Michael Hart, 07:52
- Free TR250's (or they used to be), MPRICE, 07:19
- Back on the list and an offer, MPRICE, 07:11
- RE: TR-6 and Negative Camber, Lanoway, Brian, 07:03
- RE: Tonneau questions, Brian Sanborn, 06:49
- Re: TR4 badges overheating, David Massey, 06:49
- Re: TR4 badges overheating, David Massey, 06:46
- Forwarded Message, List Administration, 02:53
- Re: TR4 right front wing and free chassis, mike francis, 01:40
- Re: TR4 badges overheating, Rave Racer, 00:20
- Re: TR4 badges overheating, Michael D. Porter, 00:07
- Go back to sleep, Mark J Bradakis, 00:05
May 24, 2001
- Side Notes on VTR 2001, Mark J Bradakis, 23:58
- Re: TR4 badges overheating, Steven Newell, 23:40
- Re: rain & more rain, GreenBugeye, 23:10
- Re: Door catches - Herald, Scott A. Roberts, 22:55
- Re: Computer wheel alignment (was TR7BFH Inner Ball Joint installation), Kevin Andrews, 22:26
- TR4 right front wing and free chassis, mike francis, 21:59
- Re: Dash Lights, Michael Hart, 21:58
- rain & more rain, lmtr4a, 20:58
- Re: Tonneau questions, Phil Ethier, 20:50
- Dinitrol rustproofing, Phil Ethier, 20:50
- TR4 badges overheating, David Massey, 20:24
- TR 4 Windshield Removal, David Massey, 20:24
- Re: Tonneau questions, David Massey, 20:24
- TR3 Comm Plate numbering., David Massey, 20:24
- Re: Vendor: British Miles, Morrisville, PA USA, Windoseat, 20:12
- Fuel Injection, Total Advance Corporation, Jay Snavely, 19:55
- RE: Computer wheel alignment (was TR7BFH Inner Ball Joint installation), Randall Young, 19:40
- RE: Goo (sealing compound), KTnKT, 19:39
- Backfire??, S Twigg, 19:36
- Re: TR 4 Windshield Removal, MRobe33243, 19:33
- Re: Tunnel light, Philip E Bacon, 19:22
- RE: PI Conversion for TR6, Williams, Bill (Atlanta), 19:18
- Re: TR7BFH Inner Ball Joint installation, Kevin Andrews, 19:11
- Tunnel light, Bob Rochlin, 18:55
- Re: TR3 Comm Plate numbering., Gbouff1, 18:33
- Forever Black Tire Gel, corey.sherman, 16:31
- RE: TR4 badges overheating, Randall Young, 16:27
- PI Conversion for TR6, sells2eat, 16:15
- TR4 badges overheating, Steven Newell, 16:09
- Re: Spitfire O/D driveshaft, Graham Stretch, 15:44
- Re: Door catches - Herald, Graham Stretch, 15:42
- TR3 Comm Plate numbering., Musson, Carl, 13:48
- Re: Tonneau questions, Steven Newell, 13:45
- Re: licence plate letters (little LBC content), Michael Hargreave Mawson, 12:53
- E-mail, Phil Smith, 11:10
- Re: TR6 hard-top, Phil Smith, 11:03
- RE: Manual Choke Questions, Sean Twigg, 09:40
- Tonneau questions, Arakelian, Peter, 09:06
- Manual Choke Questions, Sean Twigg, 08:58
- Fw: picnic baskets -where yo buy? anyone looking?, Ptegler, 08:24
- licence plate letters (little LBC content), Boothroyd, Frank, 08:10
- Goo (sealing compound), Bart Nabbe, 07:39
- Fwd: sad day, Douglas Frank, 07:20
- FS: TR6 hard-top, Paul Mitchell, 06:02
- Throttle shaft bushing, Janssen, Lee K, 05:51
- RE: Tonneau questions, Bob Danielson, 05:47
- Re: Spitfire O/D driveshaft, Sebastian King, 04:45
- Door catches - Herald, Linkens, Andy, 03:11
- Re: TR7BFH Inner Ball Joint installation, Randall Young, 01:33
- Late Late Night Frustrations!, britauto, 00:17
May 23, 2001
- re: anyone use Waxoyl?, HAMILTON DOUG, 23:35
- Fw: TR7BFH Inner Ball Joint installation, Kevin Andrews, 20:58
- Re: Top Bow color, Roger Colson, 20:47
- Modern rear seal question., Roger Colson, 20:39
- Dash Support, USER, 20:37
- Throttle shaft bushing, Bob Rochlin, 20:07
- Re: TR3 colour dilemma, Richard White, 19:49
- RE: TR3 badges-overheating, TeriAnn Wakeman, 18:53
- Re: Spitfire Sag, levilevi, 18:38
- TR-6 and Negative Camber, Williams, Bill (Atlanta), 18:20
- Spitfire Sag, levilevi, 17:53
- Re: Supercharger TR6, Rosspemlee, 17:45
- Re: Convoy to Gaydon?, Graham Stretch, 16:17
- Waxoyle, ian.viles, 16:17
- Re: anyone use Waxoyl?, Graham Stretch, 16:11
- RE: TR3 badges-overheating, Randall Young, 16:06
- Convoy to Gaydon?, Graham Stretch, 16:06
- Lucas PI intake manifolds wanted, Erik Quackenbush, 16:01
- anyone use Waxoyl?, Erik Quackenbush, 15:54
- Re: TR3 badges-overheating, ArthurK101, 15:28
- Re: G-Tech, Trevor Boicey, 15:04
- re: TR3 badges-overheating, TeriAnn Wakeman, 14:55
- Tonneau questions, Bob Rochlin, 14:45
- Re: Wooded Steering Wheel, Steve Sewell, 14:23
- RE: TR3 badges-overheating, Musson, Carl, 14:07
- Classified - TR6, Thomas Mercks, 14:02
- re: TR3 badges-overheating, Mike Rose, 13:59
- Re: Spitfire O/D driveshaft, Graham Stretch, 13:32
- RE: G-Tech, Westerdale, Bob, 13:19
- Re: TR7BFH Inner Ball Joint installation, Joe Curry, 13:06
- Re: TR7 BFH Inner ball-joint shim, Graham Stretch, 13:00
- Re: TR7BFH Inner Ball Joint installation, Randall Young, 12:58
- Re: TR7BFH Inner Ball Joint installation, Joe Curry, 12:42
- Re: TR7BFH Inner Ball Joint installation, Lee Daniels, 12:37
- Re: G-Tech, Randall Young, 12:31
- G-Tech, Janssen, Lee K, 11:59
- Re: Supercharger, slarch, 11:55
- Re: Vendor: British Miles, Morrisville, PA USA, Erik Quackenbush, 11:52
- Re: TR7BFH Inner Ball Joint installation, Joe Curry, 11:40
- Supercharger, Sebastian King, 11:35
- RE: TR7BFH Inner Ball Joint installation, Lee Daniels, 10:51
- Re: TR3 colour dilemma, a Wallace, 10:23
- Re: TR3 colour dilemma, TeriAnn Wakeman, 10:14
- TR3 Timing, AnnaBelle, 09:47
- Re: TR3 _ Badges _ Overheating, TeriAnn Wakeman, 09:44
- Re: Key lamp / courtesy light location?, Nelson Riedel, 09:28
- Vendor: British Miles, Morrisville, PA USA, Steven Newell, 09:17
- Key lamp / courtesy light location?, corey.sherman, 08:55
- TR7BFH Inner Ball Joint installation, Eganb, 08:02
- TR4s for sale in CT - 2 beauties, Brian Sanborn, 07:32
- Re: another welding question, Brian Borgstede, 07:24
- Re: TR3 colour dilemma, Dan Buettner, 07:20
- TR3 colour dilemma, a Wallace, 07:02
- RE: TR6 Seatbelts, Ken Waringa, 05:29
- Re: TR3A Direction Indicator, Randall Young, 00:08
May 22, 2001
- TR3A Direction Indicator, David Willett & Carol Gray, 23:14
- TR6 Seatbelts, Ronald Olds, 21:31
- TR3 _ Badges _ Overheating, Adrian Jones, 20:05
- re: TR6 Emblem & Badge Location, Sandy Levine, 19:39
- Bridges (was baskets), David Massey, 17:35
- Speedi-Sleeves (was Back on the Road), Randall Young, 16:36
- Speedi sleeves, was Back on the Road, Westerdale, Bob, 16:34
- Late TR4-4A Steering Rack Part Available, Mark Meany, 15:45
- Re: Back on the Road, Daniel Julien, 15:40
- Re: Back on the Road >, Peter C., 15:33
- Re: Back on the Road, Lumia, John, 14:16
- Re: M/C bellows, John Macartney, 12:35
- Carlisle, Road Trip & Ed Woods, David A. Templeton, 12:27
- TRs at Sears Point Raceway, William Hook, 11:52
- Bridges (was baskets), Joe Curry, 11:44
- The Adventures of Ol' Red & British Car Week, Trmgafun, 11:33
- Re: picnic baskets -where yo buy?, David Massey, 11:24
- Re: picnic baskets - where you buy?, Steven Newell, 11:07
- Archives are back up, Sean Twigg, 09:12
- Re: picnic baskets -where yo buy?, Scott A. Roberts, 09:11
- TR parts needed, Chris De Wet, 08:21
- Re: TR6 Emblem & Badge Location, Matt Ritter, 08:04
- Dash Lights, Michael Hart, 08:02
- TR6 Emblem & Badge Location, Nelson Riedel, 07:52
- Re: picnic baskets -where yo buy?, TeriAnn Wakeman, 07:37
- a modicum of levity... hiding truth (slight LBC), Douglas Frank, 07:06
- Re: picnic baskets -where yo buy?, Rave Racer, 01:09
May 21, 2001
- Re: Thermostatic vacuum switch, Randall Young, 23:42
- Re: Some TR6 Tonneau questions., Phil Ethier, 22:32
- Back on the road!, Daniel Julien, 21:24
- A TR's final gasp, Roger Ryan, 20:30
- TR7 BFH Inner ball-joint shim, Eganb, 20:10
- Re: Picnic baskets, TeriAnn Wakeman, 19:50
- Re: TR6s vs. whatever, Richard White, 19:50
- Thermostatic vacuum switch, Jay Snavely, 19:35
- Re: TR6s vs. whatever, David Massey, 18:49
- Re: Paint...again, ZinkZ10C, 17:45
- Re: Late Late Night Frustrations!, levilevi, 17:34
- Spitfire O/D driveshaft, Anthony Zager, 17:31
- TR7 BFH Wheel balancing -- part trois, Eganb, 17:17
- Re: TR6s vs. whatever, Joe Curry, 17:11
- TR7 BFH wheel balancing -- part deux, Eganb, 17:07
- Re: Picnic baskets, John Macartney, 17:05
- RE: TR 8 electical problem, Randall Young, 16:31
- Re: TR6s vs. whatever, David Massey, 16:18
- Wiring harness, 1979 Spitfire, David Massey, 16:18
- Re: TR6s vs. whatever, David Massey, 16:18
- TR 8 electical problem, David Massey, 16:18
- RE: TR 8 electical problem, Randall Young, 15:58
- Re: Some TR6 Tonneau questions., ArthurK101, 15:32
- Re: TR4: brake/clutch m/c bellows, ArthurK101, 15:31
- Wiring harness, 1979 Spitfire, Dan Dougherty Sr., 15:24
- TR 8 electical problem, Rob Wilfong, 14:35
- RE: Late Late Night Frustrations!, Randall Young, 14:33
- sign off, Fred Thomas, 14:31
- RE: TR4: brake/clutch m/c bellows, Randall Young, 14:26
- Re: what original color for the TR3 hood sticks? (top bows), DRSkruffy, 14:07
- RE: Late Late Night Frustrations!, Irv Korey, 13:54
- Re: Some TR6 Tonneau questions., Steven Newell, 13:35
- Some TR6 Tonneau questions., Tim Taylor, 13:09
- Re: picnic baskets -where yo buy?, TeriAnn Wakeman, 12:32
- RE: Late Late Night Frustrations!, R. Ashford Little II, 12:31
- TR4: brake/clutch m/c bellows, Steven Newell, 12:13
- Re: picnic baskets -where yo buy?, Rave Racer, 12:12
- re: Re: [TR250] The need for speed, john matthews, 12:03
- Re: picnic baskets (increasingly little LBC), Randall Young, 12:01
- Re: picnic baskets -where yo buy?, Steven Newell, 11:54
- Re: picnic baskets -where yo buy?, TeriAnn Wakeman, 11:06
- Late Late Night Frustrations!, jay_welch, 11:01
- Re: Doughnuts anyone, Joe Curry, 10:49
- Re: picnic baskets -where yo buy?, HAMILTON DOUG, 10:40
- Re: what original color for the TR3 hood sticks? (top bows), TeriAnn Wakeman, 10:31
- re: [TR250] The need for speed, john matthews, 10:30
- Re: simple doughnut removal, Barry Schwartz, 10:20
- RE: Top this if you can...., Eric Conrad, 10:15
- Re: picnic baskets -where yo buy?, George Richardson, 10:05
- Re: picnic baskets -where yo buy?, Chip19474, 09:52
- Re: what original color for the TR3 hood sticks? (top bows), Herald948, 09:46
- FS 2 high back TR6 seats, Roger Ryan, 09:45
- Re: TR6s vs. whatever, GreenBugeye, 09:40
- Re: TR6s vs. whatever, Steven Newell, 09:35
- Re:, Herald948, 09:30
- Re: [TR250] The need for speed, tr6nut, 09:22
- Re: TR6s vs. whatever, Steven Newell, 09:18
- Key lamp / courtesy light location?, corey.sherman, 09:15
- Re: 71 A-OD relay location, Nelson A. Riedel, 08:39
- Dimmer swich in RHD TR4, TR5, TR6s, dstauffa, 08:17
- Re: GT6 Not Firing, Martin Secrest, 08:13
- 71 A-OD relay location, dstauffa, 08:11
- Re: Top this if you can...., , 07:53
- Re: another welding question, Douglas Frank, 07:31
- Re: Doughnuts anyone, Barry Schwartz, 07:30
- Re: another welding question, Rocky Road Outfitters, 06:59
- color for the TR3 hood sticks, a Wallace, 06:48
- another welding question, a Wallace, 06:43
- Re: GT6 Not Firing, Nelson A. Riedel, 06:41
- TOB (long), Nelson A. Riedel, 06:19
- Re: GT6 Not Firing, Fred Thomas, 06:18
- Spit Hardtop, Thomas Mercks, 06:10
- GT6 Not Firing, Dan John, 05:53
- Re: 71 A-OD relay location, Nelson A. Riedel, 05:40
- [TR250] The need for speed, David Brady, 00:03
May 20, 2001
- Re: Late Late Night Frustrations!, Joe Curry, 23:26
- Re: Late Late Night Frustrations!, levilevi, 22:56
- Paint...again, Scott A. Roberts, 21:57
- Re: Top this if you can...., Scott A. Roberts, 21:54
- Re: Early TR3 Diff Parts...., Randall Young, 21:12
- another welding question, Douglas Frank, 20:51
- Top this if you can...., LaJoMor, 20:51
- Early TR3 Diff Parts...., Phil Pattengale, 20:41
- Re: Late Late Night Frustrations!, Joe Curry, 20:28
- Don Clark, Kyle K. Rice, 20:04
- Re: picnic baskets -where yo buy?, bob annand, 19:52
- Re: Late Late Night Frustrations!, Kai M. Radicke, 19:52
- TR7 engine thrust washers, Michael Cline, 19:12
- Re: what original color for the TR3 hood sticks? (top bows), TeriAnn Wakeman, 18:43
- Re: Late Late Night Frustrations!, Joe Curry, 17:57
- Re: Late Late Night Frustrations!, levilevi, 17:51
- Re: what original color for the TR3 hood sticks? (top bows), Randall Young, 15:20
- Picnic Baskets, Adrian, 14:52
- Re: Moss-Europe Catalogs, Adrian, 14:35
- what original color for the TR3 hood sticks? (top bows), francois wildi, 14:22
- Re: Late Late Night Frustrations!, Fred Thomas, 14:01
- Re: Late Late Night Frustrations!, Graham Stretch, 13:39
- Re: picnic baskets -where yo buy?, Dan Buettner, 11:34
- Re: picnic baskets -where yo buy?, Steve Daniels, 11:29
- Re: picnic baskets -where yo buy?, TeriAnn Wakeman, 11:20
- picnic baskets -where yo buy?, CarlSereda, 10:50
- TR6 body shell on eBay, Musson, Carl, 09:15
- Re: E-mail, Phil Smith, 09:06
- Re: E-mail, Bob Labuz, 08:12
- RE: Overdrives, Brian Sanborn, 07:32
- RE: Late Late Night Frustrations!, Brian Sanborn, 07:15
- RE: E-mail, Brian Sanborn, 06:57
- TR8 alloy wheels for sale, Mark the Shark, 06:56
- Moss-Europe Catalogs, Brian Sanborn, 06:49
- Re: The new MINI, David Templeton, 06:43
May 19, 2001
- Re: E-mail (no LBC, sorry for the wasted bandwidth), Randall Young, 23:56
- TR7 BFH Wheel balancing/alignment, Eganb, 21:48
- Re: TR250 engine removal, Joe Curry, 21:23
- TR250 engine removal, David Brady, 21:09
- Re: The new MINI, Jay Snavely, 19:49
- E-mail, Phil Smith, 19:39
- Re: Source for English Picnic Basket, TRIPHSTEVE, 19:29
- Re: The new MINI, LaJoMor, 19:19
- Re: Source for English Picnic Basket, Kai M. Radicke, 15:00
- Source for English Picnic Basket, tom winslow, 14:45
- Update on Pertronix, Michael Hart, 14:22
- The new MINI, Jay Snavely, 13:40
- Fwd: TR4 Restoration, ArthurK101, 10:36
- Re: Disk Brake Problem non-Triumph, David Smith, 09:18
- TR6 Engines for sale teamfat2.dsl.aros.net id f4JF7sx26578, Jim Davis, 09:08
- Racing, Michael Hart, 06:32
- Re: Late Late Night Frustrations!, Kai M. Radicke, 06:15
- Brit Car Meet this Sunday in Dixon CA, CarlSereda, 05:59
- RE: Late Late Night Frustrations!, Brian Sanborn, 05:46
- Carlsle weather Looky Looky! Yippeeeee!, Paul Tegler, 04:23
- TR250 camshaft collapse, David Brady, 01:28
- Late Late Night Frustrations!, Kai M. Radicke, 00:33
May 18, 2001
- TR3A Door Fit, Justin Paxton, 21:03
- Signing off, Bowen, Patrick, 20:10
- Old Wierd, month two, Ken Gano, 18:37
- Leaky Spin-on Oil Filter, Arakelian, Peter, 17:33
- Sticky Stick Shift, David Massey, 17:11
- Re: TR250 camshaft (sorry for dupes, trying put into plaintext mode), Graham Stretch, 16:53
- Re: BCNH (usa) - Show of Dreams, June 17 (long), Graham Stretch, 16:53
- RE: TR250 camshaft collapse, Eric Conrad, 16:28
- Re: Disk Brake Problem non-Triumph, Graham Stretch, 16:00
- Re: TR250 camshaft (sorry for dupes, trying put into plaintext mode), Fred Thomas, 14:46
- RE: TR250 camshaft (sorry for dupes, trying put into plaintext mode), Randall Young, 14:29
- Re: TR250 camshaft (sorry for dupes, trying put into plaintext mode), Erik Quackenbush, 14:28
- Re: TR250 camshaft (sorry for dupes, trying put into plaintext mode), Nelson A. Riedel, 13:42
- TR250 camshaft (sorry for dupes, trying put into plaintext mode), David Brady, 13:05
- TR250 camshaft collapse, David Brady, 12:54
- TR250 camshaft collapse, David Brady, 12:52
- TR250 camshaft collapse, David Brady, 12:49
- TR250 camshaft collapse, David Brady, 12:46
- BCNH (usa) - Show of Dreams, June 17 (long), Dwbradbury, 11:54
- RE: TR4 Brakes/Engine Questions, Randall Young, 11:50
- RE: new to list and TR6 engine problem, Jim Altman, 11:08
- Disk Brake Problem non-Triumph, wallaces, 10:20
- TR4 Brakes/Engine Questions, Riff Brown, 09:51
- Re: new to list and TR6 engine problem, Alan J. Harris, 09:19
- Re: British Wiring, Erik Quackenbush, 09:06
- Sticky Stick Shift, Crouter, Bruce CIC, 08:54
- Luggage Rack for TR6?, Davgil, 06:51
- Leaky Spin-on Oil Filter, James Fowler, 06:18
- RE: Valances and LRP, Chris De Wet, 06:11
May 17, 2001
- Re: Disk Brake Problem non-Triumph, Randall Young, 22:05
- Re: Forwarded: Remote Starter, Randall Young, 21:44
- Disk Brake Problem non-Triumph, David Smith, 21:13
- Re: Dumb question of the day, levilevi, 21:09
- Re: Advertisement: All British Field Meet 2001, Scuzz, 20:54
- Re: Fan belt replacment TR6, Jim Davis, 20:48
- Fan belt replacment TR6 x-mac-creator="4D4F5353", David Massey, 18:18
- Re: TR6 Rocker Pedestal Question, Graham Stretch, 17:15
- Re: Pertronix failure..., Graham Stretch, 17:15
- Re: Pertronix Problem, Graham Stretch, 17:15
- Advertisement: All Triumph Drive-In 2001, Michael_Bayrock, 16:42
- Forwarded: Remote Starter, List Administration, 15:43
- Old test routes, John Macartney, 15:36
- Fan belt replacment TR6 x-mac-creator="4D4F5353", bob, 15:13
- British Wiring, Anne Garren, 14:21
- RE: TR6 Rocker Pedestal Question, Randall Young, 13:08
- RE: Pertronix failure..., Randall Young, 13:06
- Re: TD Fitchett- Shropshire, Graham Stretch, 12:49
- Re: Pertronix failure..., William Hook, 12:45
- Re: TR6 Rocker Pedestal Question, Nelson A. Riedel, 12:41
- TR6 Rocker Pedestal Question, Kai M. Radicke, 12:21
- RE: new to list and TR6 engine problem, Jim Altman, 12:06
- RE: new to list and TR6 engine problem, David Massey, 11:32
- Arrival, Bill Pugh, 11:23
- Re: Pertronix Problem, Joe Curry, 11:00
- RE: Pertronix Problem, Westerdale, Bob, 10:36
- New tire (tyre) choices, Barry Schwartz, 09:52
- Subject: Re: TR6es passing Neons, Chuck Arnold, 09:47
- Pertronix Problem, Bill Pugh, 08:59
- Dumb question of the day, R. Ashford Little II, 07:36
- RE: 2 Questions (TR4), Brian Sanborn, 07:35
- Parts vendor in Boston, Stephane St-Amant, 07:30
- RE: Carb Piston, Brian Sanborn, 07:25
- RE: new to list and TR6 engine problem, David Massey, 06:08
- new to list and TR6 engine problem, David Massey, 06:08
- Historical interest?, John Macartney, 02:36
May 16, 2001
- TR6 - Powder Coating a Brake Booster, levilevi, 23:20
- Re: TR4A: changing wheel studs, Phil Ethier, 22:44
- RE: TR4A: fitting body to frame, Eric Conrad, 21:37
- Next Question, Bill Pugh, 20:57
- RE: new to list and TR6 engine problem, Jim Altman, 20:55
- Pertronix failure..., Bill Pugh, 20:48
- new to list and TR6 engine problem, Alan J. Harris, 20:39
- Re: TR6s vs. whatever, Joe Donovan, 20:11
- It's looking better and better people!, Paul Tegler, 19:17
- Re: Octane Boost, ZinkZ10C, 18:49
- electrical question, as always...., David Massey, 18:24
- Poopin' Neons, Keith Ehrlich, 18:23
- Re: British Car day Chateau Elan, Rosspemlee, 17:58
- TR4A: changing wheel studs, Cliff Hansen, 17:41
- TR4A: fitting body to frame, Cliff Hansen, 17:38
- electrical question, as always...., KTnKT, 17:33
- Boston area paint, Bob Rochlin, 17:08
- Carb Piston, Ct54531, 16:35
- Re: Weber DGV Economy and Return Spring, Barry Schwartz, 16:31
- 74 TR6 driver door switches, David Massey, 15:14
- 2 Questions (TR4), David Massey, 15:11
- Re: TR6s vs. whatever, David Massey, 15:11
- TR6es passing metaphorically, David Massey, 15:11
- 2 Questions (TR4), Freeman, Noah, 13:15
- RE: Octane Boost, Randall Young, 12:41
- RE: Octane Boost, Randall Young, 12:22
- TR6 in Tucson Paper FS, Joe Curry, 11:45
- Re: TR6s vs. whatever, Martin Secrest, 11:40
- Re: TR6s vs. whatever, TeriAnn Wakeman, 11:40
- Re: TR6s vs. whatever http://netwinsite.com/top_mail.htm, Phil Ethier, 11:27
- Octane Boost, Michael Hart, 10:53
- Octane Boost, Michael Hart, 10:48
- TD Fitchett- Shropshire, Scott A. Roberts, 10:11
- Re: TR6s vs. whatever, TeriAnn Wakeman, 09:55
- 74 TR6 driver door switches, Edward Lancaster, 08:55
- RE: Decisions, Decisions, TeriAnn Wakeman, 08:24
- TR6es passing metaphorically, Boothroyd, Frank, 08:07
- 4 sale, Fred Thomas, 07:10
- Re: TR6es passing Neons, David Massey, 07:06
- Overdrive, Chris De Wet, 06:32
- Re: TR6es passing Neons, Mitchel Seff, 04:36
- Re: TR6es passing Neons, Michael D. Porter, 00:53
- Re: TR6es passing Neons, Easton Family, 00:41
May 15, 2001
- Re: British Car day Chateau Elan, Trevor Boicey, 23:20
- Lucas vs el cheepo Moss screw type coil, John Runge, 21:16
- RE: RE: whew... May I recommend not to try this yourself, Anne Garren, 20:34
- MG List?, Dennis N Culligan, 20:21
- In need of a frame, David Connitt, 20:15
- MG List?, Dennis N Culligan, 20:00
- Re: TR6s vs. whatever, Joe Donovan, 19:09
- RE: Lucas vs el cheepo Moss screw type coil, John Runge, 19:08
- RE: Weber DGV problem, S Twigg, 17:47
- RE: Lucas vs el cheepo Moss screw type coil, Randall Young, 17:40
- Re: RE Nice holes in sheet metal, ZinkZ10C, 17:18
- Re: BMH Certificates, John Macartney, 17:18
- RE: TR6s vs. whatever, Jim Hill, 17:18
- Re: TR6s vs. whatever, David Massey, 16:52
- Re: TR6s vs. whatever, David Massey, 16:51
- Lucas vs el cheepo Moss screw type coil, John Runge, 16:49
- Re: TR6s vs. whatever, Trevor Boicey, 16:37
- RE: TR6s vs. whatever, Jim Hill, 16:31
- Re: TR6s vs. whatever, Irv Korey, 16:14
- Re: TR6s vs. whatever, Martin Secrest, 16:11
- Re: TR6s vs. whatever, Trevor Boicey, 15:53
- Re: British Car day Chateau Elan, Rosspemlee, 15:47
- Re: RE Nice holes in sheet metal, Joe Curry, 15:36
- TR3 mph and rpm, wallaces, 15:25
- What is STAMPRO, Karl Lücking, 15:00
- 1974 TR6 - starter & oil pressure, Sloan, Jim, 14:56
- RE: TR4: Clevis, your small but important friend, Randall Young, 14:47
- RE: Decisions, Decisions, Randall Young, 14:43
- Re: Engine Mods for the Paranoid (Knock Sensor), Erik Quackenbush, 14:28
- Decisions, Decisions, David Connitt, 14:19
- TR4: Clevis, your small but important friend, Steven Newell, 14:15
- Carlisle Parts teamfat2.dsl.aros.net id f4FK3Nw26834, Paul Brandsema, 14:04
- RE: whew... May I recommend not to try this yourself, Peter Zaborski, 13:50
- Seat belt extender, R. Ashford Little II, 13:47
- TR6s vs. whatever, Dennis N Culligan, 13:45
- TR6es passing Neons, Arakelian, Peter, 13:28
- Radio Faceplate, Cliff Davies, 13:28
- TR6s and Neons, Dennis N Culligan, 13:27
- whew... May I recommend not to try this yourself, Arakelian, Peter, 13:23
- Spitfire for Nothing, ArthurK101, 12:44
- RE Nice holes in sheet metal, Michael Hart, 12:26
- Re: Cutting nice holes in sheet metal, Trevor Boicey, 12:14
- Re: British Car day Chateau Elan, CarlSereda, 12:10
- RE: Triumph MotoRing, Randall Young, 12:07
- Triumph MotoRing, R. Ashford Little II, 11:52
- RE: TR6es passing Neons, Randall Young, 11:30
- Re: TR6es passing Neons, Irv Korey, 10:22
- Spit parts at Carlisle Import, Alan Storey, 10:12
- TR6es passing Neons, David Massey, 09:33
- Import Carlisle, Rikrock, 09:16
- Re: TR-6 Lever Shock, Chuck Arnold, 09:05
- compression test, Lumia, John, 08:02
- Cutting nice holes in sheet metal, John Middlesworth, 07:47
- Re: TR6es passing Neons, , 07:17
- Re: TR6es passing Neons, , 07:17
- RE: New to list, and restoring a TR4A, Brian Sanborn, 07:14
- Route / group run to Carlisle, Ptegler, 06:44
- Carlise Weather Report, JRossi727, 06:19
- Carlisle item for sale, JRossi727, 06:17
- TR6es passing Neons, Boothroyd, Frank, 05:55
- Re: Triumphs@Autox.team.net daily digest V1 #542, jay_welch, 05:43
- Carlisle Import Show, suhring, 04:50
- RE: Valances and LRP, Chris De Wet, 04:18
- RE: British Car day Chateau Elan, Daniel L Parrott, 04:18
- Re: AAaaRRgghhhh...., Rave Racer, 00:33
May 14, 2001
- British Car day Chateau Elan, Ronnie Babbitt, 22:49
- BMH Certificate(s), Tom Beaver, 21:58
- Parts for Import Carlisle, Edward Woods, 20:16
- Re: whew... May I recommend not to try this yourself:, Vito Pacione, 19:24
- whew... May I recommend not to try this yourself:, corey.sherman, 19:08
- Re: Compression testing, Bob Labuz, 18:47
- TR3 mph and rpm, Adrian Jones, 18:38
- AAaaRRgghhhh...., Bill Pugh, 17:28
- Brake Fluif, Sumner Weisman, 17:15
- RE: fuel pump problems, Randall Young, 17:02
- RE: TR3 suspension questions, Randall Young, 16:21
- Compression testing, Ct54531, 15:59
- RE: TR3 - Fitting Dzus on windshield ?, Randall Young, 15:58
- RE: Brake Fluif, Randall Young, 15:33
- RE: Engine Mods for the Paranoid (Knock Sensor), Randall Young, 15:23
- ExxonMobil tribute to brit cars, Steven Newell, 14:16
- Re: Engine Mods for the Paranoid (Knock Sensor), Trevor Boicey, 13:08
- Re: Carb Cleaning, Douglas Frank, 12:48
- Re: LRP, Graham Stretch, 12:13
- Engine Mods for the Paranoid (Knock Sensor), Kai M. Radicke, 11:55
- Fwd: Triumph (anyone interested in checking one in Orlando, Florida), ArthurK101, 11:51
- Re: Light Cars, David Massey, 11:43
- Brake Fluif, David Massey, 11:42
- Re: Light Cars, Steven Newell, 11:22
- Brake Fluif, Bill Pugh, 11:01
- Re: TR6 Suspension Question..., Chip19474, 09:38
- New to list, and restoring a TR4A, Percy, 09:08
- FS: Wooded Steering Wheel, ebk, 08:25
- TR-6 Lever Shock, Williams, Bill (Atlanta), 06:12
- Stromberg Emission Control Carbs (The Sods!!), Dan John, 05:59
- Re: TR4 clutch questions, Nelson A. Riedel, 05:48
- Re: TR4 clutch questions, Irv Korey, 05:41
- TR3 - Fitting Dzus on windshield ?, Pat, 00:04
May 13, 2001
- 3 point seat belts in a TR3, Petearales, 23:21
- Re: TR4 clutch questions, levilevi, 23:07
- TR4 clutch questions, Dietmar Schlei, 22:46
- TR3 suspension questions, Dan Buettner, 21:59
- RE: Concourse Prep, Justin Paxton, 21:41
- Re: Spedi Sleeve for TR6 crankshaft., levilevi, 21:29
- RE: Concourse Prep, Justin Paxton, 21:15
- RE: Concourse Prep, Justin Paxton, 21:09
- Re: Concourse Prep, TR250Driver, 19:59
- Blasting small Parts, Vito Pacione, 18:03
- 59 TR3A, George Warner, possible racing history, Gbouff1, 15:54
- Pair NOS Michelin X 185x15, Frank J. Angelini Sr., 13:02
- Re: TR6 Suspension Question..., Nelson A. Riedel, 12:00
- re: polishing aluminum and keeping it that way, HAMILTON DOUG, 11:26
- TR6/ZX conversion, John Summers, 10:59
- TR4 trailering., Roger Helman, 10:43
- TR4A Tire Info, Jim, 10:26
- TR6 Suspension Question..., SHOMWAY, 09:32
- RE: First Road Trip: 95% successful && top questions, Brian Sanborn, 07:46
- RE: First Road Trip: 95% successful && top questions, Brian Sanborn, 07:42
- Re: Restarting GT6 part 4, Stephane St-Amant, 06:46
- Non-LBC - Kingston ON, a Wallace, 06:39
- TR 6/240Zx, David Massey, 06:15
- TR4 - time to go?, ebk, 05:26
- Restarting GT6 part 4, Rave Racer, 03:52
May 12, 2001
- Re: light cars, Phil Ethier, 22:22
- Hammer Mechanic strikes again, levilevi, 21:49
- 3 point seat belts in a TR3, Richard White, 20:37
- TR 6/240Zx, John Summers, 20:09
- Re: 240Z Rear Brake Drums for TR6, Rikrock, 20:08
- fuel pump problems, lmtr4a, 19:25
- RE: 240Z Rear Brake Drums for TR6, Kyle K. Rice, 19:16
- Need a TR4A Grill ?, Pat, 19:13
- RE: 240Z Rear Brake Drums for TR6, Kyle K. Rice, 18:53
- Re: fuel pump success, Jeff Johnson, 18:38
- cARB cLEANING - Adjusting, Petearales, 18:20
- 240Z Rear Brake Drums for TR6, Kyle K. Rice, 17:41
- Re: Carb Adjusting, Steve Daniels, 15:48
- First Road Trip: 95% successful && top questions, Malcolm Walker, 15:03
- Concourse Prep, Justin Paxton, 14:55
- Re: Carb Adjusting, Scott A. Roberts, 13:32
- Re: TR4 short bulge bonnet value?, Dave Quirt, 13:15
- Re: Carb Adjusting, Steve Daniels, 11:52
- Carb Adjusting, Rave Racer, 11:41
- Wanted TR6 Trunk Lock, Vito Pacione, 09:22
- Which top-Prestige or Skinner, KTnKT, 08:06
- Fuel pump replacement, David Massey, 07:31
- fuel pump success, Jay Snavely, 07:30
- Priming oil pump with drill, David Massey, 06:42
- Carb Cleaning, David Massey, 06:28
- cARB cLEANING, David Massey, 06:27
- Fuel pump replacement, Jay Snavely, 05:46
May 11, 2001
- RE: Distributor for 74 TR6, Kyle K. Rice, 22:46
- RE: Long Shot, Phil Pattengale, 20:14
- Re: TR4 short bulge bonnet value?, TRHPK7195, 19:35
- Refinishing a wooden steering wheel, Stephane St-Amant, 19:16
- RE: Spark plugs for TR3 and relatives, Randall Young, 18:51
- Spark plugs for TR3 and relatives, Roger Colson, 18:40
- RE: Short bubble bonnet, Brad Eells, 18:05
- happy tach, Rick Barnard, 18:04
- FW: cARB cLEANING, Jim Altman, 17:23
- Carb Cleaning, Ct54531, 17:08
- RE: cARB cLEANING, Jim Altman, 17:01
- cARB cLEANING, Ct54531, 16:25
- Lightest Car, Bill Elliott, 15:27
- light cars, Fred Thomas, 15:18
- British Car Days @ Chateau Elan, Jim Davis, 15:02
- Re: Light Cars, Erik Quackenbush, 14:57
- Priming oil pump with drill, William Hooper, 14:03
- Re: TR4 short bulge bonnet value?, culture.virus, 13:57
- Re: polishing aluminum and keeping it that way, Fred Thomas, 13:38
- polishing aluminum and keeping it that way, Mark Hooper, 13:28
- Light Cars, GHaynesTR4, 12:56
- RE: TR3 spark plugs (was THANKS - SU CARB DOCTORS), Randall Young, 12:04
- Re: Dare to be British - 2001, Douglas Frank, 11:55
- Dare to be British - 2001, Dennis N Culligan, 11:41
- Re: TR4 short bulge bonnet value?, , 10:52
- Re: TR4 short bulge bonnet value?, Steven Newell, 10:16
- Bob Danielson, Don Sforza, 10:03
- Lightest car, William Scherer, 09:39
- RE: THANKS - SU CARB DOCTORS, Brian Sanborn, 09:14
- THANKS - SU CARB DOCTORS, jgoulet, 09:07
- Re: Quality of NEW TR6 Crankshafts???, Erik Quackenbush, 09:06
- RE:Restartting GT6, Lumia, John, 08:49
- TR6 cooling items for sale, Riveting Images, 08:43
- Spit door caps, aribert, 03:48
- RE: Long Shot, Davies William-qswi646, 02:54
- Long Shot, John Gillis, 02:44
- Re: Restarting GT6 part 3, john matthews, 00:43
- Re: TV, John Macartney, 00:21
May 10, 2001
- Re: Compression Test, Phil Ethier, 23:52
- Re: clutch fluid, Bill Kelly, 22:24
- Lightest Car, Michael D. Miles, PE, 22:23
- Re: Something for the upcoming VTR.... (a bit long), Scott A. Roberts, 22:03
- Re: radio question, Scott A. Roberts, 21:52
- silicon brake fluid, russell furzer, 21:28
- Re: admittedly, I try not to inject politics..., Gospitt, 20:59
- TR4 short bulge bonnet value?, culture.virus, 19:50
- clutch fluid, Alan, 19:49
- clutch fluid, Alan, 19:26
- Re: Restarting GT6 part 3, Rave Racer, 19:26
- Re: Admittedly, I try not to inject politics... (long), Scott A. Roberts, 18:52
- Re: MPG test, Chip19474, 17:53
- Re: 1960 TR3A clutch, Graham Stretch, 17:01
- Fuel shut-off installed, Steven Newell, 16:14
- LBC on TV, Mark Hooper, 16:13
- Re: Restarting GT6 part 3, Rave Racer, 16:12
- 1960 TR3A clutch, ArthurK101, 16:08
- Quality of NEW TR6 Crankshafts???, Kai M. Radicke, 15:56
- gas regulator, Fred Thomas, 15:38
- TV, Graham Stretch, 14:55
- RE: admittedly, I try not to inject politics..., Jim Hill, 14:36
- MPG test, Fred Thomas, 14:08
- Mid MO British Car Show, Chad Stretz, 13:23
- Re: admittedly, I try not to inject politics..., Matt Ritter, 13:19
- Re: admittedly, I try not to inject politics..., Lftlesl, 12:43
- RE: Lightest Car?, Mitchell, Doug (D.B.), 12:06
- RE: Admittedly, I try not to inject politics... (long), Randall Young, 11:41
- RE: Lightest Car?, David Massey, 11:35
- 1965 TR4 with a WARRANTY!, alan jones, 11:01
- FW: Lightest Car?, Mitchell, Doug (D.B.), 10:48
- RE: Lightest Car?, Mitchell, Doug (D.B.), 10:46
- Correction on Comm # for '66 TR4A (was Re: 1967tr4a), ArthurK101, 10:43
- RE: Admittedly, I try not to inject politics... (long), Mark Hooper, 10:42
- RE: Lightest Car?, David A. Templeton, 10:40
- RE: Lightest Car?, Herald948, 10:35
- No TR content: Jag 420 seen FS, Denver, Steven Newell, 10:35
- RE: Admittedly, I try not to inject politics... (long), Bowen, Patrick, 10:07
- Re: Admittedly, I try not to inject politics... (long) a.EDU>, erl, 10:01
- Re: No Oil Pressure a.EDU>, erl, 09:45
- RE: Lightest Car?, David A. Templeton, 09:43
- RE: Admittedly, I try not to inject politics... (long), Ken Gano, 09:37
- Re: Quiller Spitfires, Joe Curry, 08:59
- Re: 1967tr4a, , 08:01
- Admittedly, I try not to inject politics... (long), Michael D. Porter, 07:38
- Re: No Oil Pressure, David Massey, 07:04
- Restarting GT6 part 3, David Massey, 07:03
- Re: gauge cleaning, Chip19474, 06:02
- Re: trailing arm bushings, Chip19474, 05:42
- Re: Lightest Car?, Fred Thomas, 04:56
- RE: Quiller Spitfires, Davies William-qswi646, 01:34
May 09, 2001
- Restarting GT6 part 3, Rave Racer, 23:49
- GT-6 Rear 3:27, jim williams, 20:01
- Distributor for 74 TR6, Kyle K. Rice, 19:56
- gauge cleaning, Rick Barnard, 19:35
- 67TR 4A, USER, 19:28
- Re: No Oil Pressure, Frank & Sandy Crowe, 18:36
- RE: Cam Timing Gear Question TR 4 Cyl Engine, Brian Sanborn, 17:47
- Re: Quiller Spitfires, Joe Curry, 17:42
- Re: Quiller Spitfires, Graham Stretch, 17:21
- Re: gauge cleaning, Graham Stretch, 16:47
- FW: Does anyone have a b/w image of the Triumph Laurel?, Michael_Bayrock, 16:35
- Triumph theft protection (humour), Steven Newell, 16:33
- Re TR4A Question, Adrian, 16:20
- Does anyone have a b/w image of the Triumph Laurel?, Michael_Bayrock, 15:43
- Re: No Oil Pressure - 74 TR6, Graham Stretch, 15:40
- Re: 1967tr4a, David Massey, 15:29
- re: trailing arm bushings, David Massey, 15:20
- Re: Something for the upcoming VTR.... (a bit long), Michael D. Porter, 15:14
- Re: 1967tr4a, Brian Borgstede, 15:06
- Something for the upcoming VTR.... (a bit long), John Macartney, 14:54
- Re: 1967tr4a, ArthurK101, 14:49
- Re: trailing arm bushings, David Massey, 14:45
- re: trailing arm bushings, Rob Pennington, 14:09
- Re: Starting, Lumia, John, 14:09
- Quiller Spitfires, Will, 13:36
- Re: trailing arm bushings, James Luke, 12:53
- Fwd: Re: 15 year stopped GT6 part 2, Fred Marks, 12:53
- RE: gauge cleaning, Ken Waringa, 12:31
- Re: For Andy http://netwinsite.com/top_mail.htm, Phil Ethier, 11:58
- plug for moma, Douglas Frank, 11:48
- RE: gauge cleaning, Brian Sanborn, 11:37
- Buying a TR6, Wesley Lyon, 11:35
- No Oil Pressure - 74 TR6, David Massey, 11:30
- RE: gauge cleaning, Jim Altman, 11:24
- Trunk liner material?, BJLepley, 10:45
- VIRUS WARNING, Pat Mullen, 10:17
- Re: IS THERE AN SU CARB DOCTOR IN THE HOUSE?, Bob Labuz, 10:16
- Pertronix Ignitor, Bill Pugh, 09:59
- starting, Fred Thomas, 09:56
- TR2 brakes, William Scherer, 09:28
- No Oil Pressure - 74 TR6, Lumia, John, 08:30
- gauge cleaning, Lumia, John, 08:07
- TR7 BFH Oil Transfer Casing, David Massey, 07:47
- trailing arm bushings, David Massey, 07:46
- TR Joke, David Massey, 07:45
- Brake Caliper swapping. . . TR- 4 to 6, David Massey, 07:45
- 1967tr4a, David Massey, 07:45
- No Oil Pressure - 74 TR6, David Massey, 07:45
- Electronic Ignitions, George Richardson, 07:27
- understanding your car and mainatining it (not only Triumphs), GuyotLeonF, 06:53
- Re: No Oil Pressure - 74 TR6, Martin Secrest, 05:51
- radio question, Sean Twigg, 05:23
- Something for the upcoming VTR.... (a bit long), Michael D. Porter, 02:55
May 08, 2001
- Re: No Oil Pressure - 74 TR6, Bill Kelly, 23:14
- Re: 1967tr4a, Bill Kelly, 22:37
- TR3 washer, Ronnie Babbitt, 22:07
- TR6 sheet metal needed..ASAP, RX74EVR, 20:43
- 1967tr4a, USER, 20:34
- trailing arm bushings, Rod MacLeod, 19:28
- TR7 BFH Oil Transfer Casing, Eganb, 19:12
- re: IS THERE AN SU CARB DOCTOR IN THE HOUSE?, Anthony Rhodes, 19:06
- Brake Caliper swapping. . . TR- 4 to 6, Scott Tilton, 19:00
- RE: Part quality (Spitfire), Daniel L Parrott, 18:59
- No Oil Pressure - 74 TR6, Sloan, Jim, 17:48
- TR6 interior for sale, LBPB1, 17:27
- RE: Fuse for TR6, Randall Young, 17:26
- TR Joke, Brewer, Bill, 17:26
- TR3 & TR4A parts needed & TR3 assembly questions, Brad Kahler, 17:09
- Re: TR4 - time to go?, Graham Stretch, 17:04
- TR6 Rear Suspension, David Massey, 16:35
- TR4A Questions, David Massey, 16:33
- 15 year stopped GT6 part 2, Rave Racer, 16:02
- RE: IS THERE AN SU CARB DOCTOR IN THE HOUSE?, Randall Young, 16:00
- TR6 Rear Suspension, Williams, Bill (Atlanta), 15:45
- RE: TR4A Questions, Brian Sanborn, 15:23
- RE: TR4A Questions, Brian Sanborn, 15:21
- Re: Toyota Land Cruiser throwout (release) bearing part number, jay_welch, 15:21
- General Restoration Questions, jay_welch, 15:19
- RE: Toyota Land Cruiser throwout (release) bearing part number, Randall Young, 15:14
- TR6 Rear Suspension, Williams, Bill (Atlanta), 14:41
- Feel good about TR restoration budget: WSJ article, Steven Newell, 14:12
- TR4A Questions, Adrian, 13:08
- Re Spitfire Keys, Adrian, 13:08
- Toyota Land Cruiser throwout (release) bearing part number, jay_welch, 12:53
- Gas pooling at carbs, David Massey, 12:44
- priorities, Fred Thomas, 12:07
- RE: Gas pooling at carbs, David A. Templeton, 11:43
- RE: TR4 - time to go? (time to upgrade?), Eric Conrad, 11:40
- Re: Gas pooling at carbs, Douglas Frank, 11:28
- Re: IS THERE AN SU CARB DOCTOR IN THE HOUSE?, Pat Mullen, 11:22
- Re: TR4 - time to go? (time to upgrade?), Steven Newell, 11:13
- RE: TR4 - time to go?, Musson, Carl, 10:47
- Re: TR4 - time to go?, Steven Newell, 10:23
- Re: TR4 - time to go?, Bill Pugh, 10:22
- Gas pooling at carbs, David A. Templeton, 10:14
- IS THERE AN SU CARB DOCTOR IN THE HOUSE?, jgoulet, 09:31
- Fuse for TR6, Chuck Arnold, 09:13
- Re: TR4 - time to go?, ArthurK101, 08:29
- Re: Herald/Spitfire crossbreeding, Herald948, 08:10
- RE: TR4 - time to go?, Eric Conrad, 08:07
- Re: A Triumph-ent Weekend, Chip19474, 08:04
- RE: TR4 - time to go?, Chris De Wet, 07:49
- TR4 rear end, ArthurK101, 07:38
- Re: "Herald 13/75", Herald948, 07:30
- RE: TR4 - time to go?, Chris De Wet, 06:40
- RE: Part quality (Spitfire), Chris De Wet, 06:06
- RE: "Herald 13/75", Chris De Wet, 05:56
- Re: TR4 - time to go?, Fred Thomas, 05:37
- RE: Part quality (Spitfire), Daniel L Parrott, 04:41
- Re: Alarms and power door locks., Nolan Penney, 04:38
- RE: "Herald 13/75", Chris De Wet, 04:25
- RE: TR4 - time to go?, Davies William-qswi646, 04:23
- RE: "Herald 13/75", Chris De Wet, 04:08
- Re: TR4 - time to go? ig.mot.com>, sebking, 04:05
- RE: TR4 - time to go?, Davies William-qswi646, 03:55
- RE: TR4 - time to go?, Chris De Wet, 03:54
- TR4 - time to go?, sebking, 03:46
- RE: How & where to get new GT6 keys cut?, Chris De Wet, 02:44
- RE: "Herald 13/75", Davies William-qswi646, 02:39
- RE: Ebay Seller Question!!, Chris De Wet, 02:06
May 07, 2001
- How & where to get new GT6 keys cut?, William Hooper, 22:45
- Re: Quinton Hazell Catalog?, MOWOGMAN, 21:30
- Quinton Hazell Catalog?, Twistblts, 21:25
- Re: Herald/Spitfire crossbreeding, Joe Curry, 21:16
- Re: Massachusetts classic car insurance, Cwn74, 20:51
- Herald/Spitfire crossbreeding, Kevin B. Rhodes, 20:43
- RE: TR6 started running poorly, Kyle K. Rice, 20:38
- TR4A General Restoration Questions, David Connitt, 20:29
- Re: "Herald 13/75", Rosspemlee, 20:26
- Cam Timing Gear Question TR 4 Cyl Engine, Brad Eells, 19:20
- Massachusetts classic car insurance, KTnKT, 19:12
- Re: Compression Test, Randall Young, 19:06
- "Herald 13/75", David Massey, 17:30
- Re: "Herald 13/75", Joe Curry, 17:12
- "Herald 13/75", John Macartney, 17:04
- 74 TR6 Ignition Timing, David Massey, 16:46
- Re: OD, David Massey, 16:46
- RE: Atlanta British Car Day, Daniel L Parrott, 15:58
- '71 TR6 for sale, Dave Quirt, 15:00
- Atlanta British Car Day, R. Ashford Little II, 14:53
- Re: TR4 electric fan?, , 14:48
- Re: Solex carb mixture adjustment, Randall Young, 14:30
- Re: Spedi Sleeve for TR6 crankshaft., Randall Young, 14:16
- Solex carb mixture adjustment, Kevin Rhodes, 13:56
- Re: Spedi Sleeve for TR6 crankshaft., Steven Newell, 13:46
- Spedi Sleeve for TR6 crankshaft., dstauffa, 13:30
- No Reverse lights - TR6, James R. Holekamp, 13:09
- Re: A Triumph-ent Weekend, Graham Stretch, 13:03
- TR4 electric fan?, Billtr4, 13:01
- A Triumph-ent Weekend, Raymond Hatfield, 12:22
- Re: TR3/4 Cooling System Pipe, ArthurK101, 12:10
- 74 TR6 Ignition Timing, Williams, Bill (Atlanta), 11:55
- Re: For Andy, Herald948, 11:47
- For Andy, Bill Pugh, 11:23
- Re: OD, Graham Stretch, 11:12
- Part quality (Spitfire), Barry Schwartz, 11:01
- Electrical question, Crockett, Steve, 10:32
- DCOE Plastic Float Shut Off Height, Don Clark, 10:15
- Re: Inter-Marque Waving??? - Harley Davidson Owners, Chip19474, 09:56
- Re: Compression Test, Randall Young, 07:54
- Compression Test, David Massey, 07:47
- New Sills prep TR6, Steve Coupe, 07:29
- TR6 ign light & wiring questions, Boothroyd, Frank, 06:22
- Compression Test, Stephane St-Amant, 06:12
- RE: OD, Chris De Wet, 04:43
- Thanks FT, Chris De Wet, 04:38
- RE: Dan Masters, Chris De Wet, 04:08
- 5/16 ferrels, Fred Thomas, 02:49
- surrey top lining and rubber seals, clarkja34, 00:02
May 06, 2001
- IDEA FOR NEW RADIATOR PIPE, David Rogers, 23:29
- Test, please delete, ArthurK101, 22:51
- Items on E-bay, Don Sforza, 20:24
- OD, David Massey, 20:09
- OD, David Massey, 20:09
- fuel pump pressure, David Massey, 20:06
- Gas Tanks, David Massey, 20:06
- Stromberg, David Massey, 20:06
- Re: Stromberg, Randall Young, 20:00
- Re: fuel pump problem, Randall Young, 19:48
- Re: fuel pump pressure, Randall Young, 19:38
- Re: TR6 brake hydraulics, Randall Young, 19:33
- Re: TR3 Control Head/Horn Button - Dumb Question, Michael Ferguson, 19:26
- Re: TR3 Control Head/Horn Button - long answer, Randall Young, 19:23
- TR6 brake hydraulics, jay_welch, 19:10
- Mystery recessed box on TR6 firewall x-mac-creator="4D4F5353", bob, 19:03
- PB Blast, Don Sforza, 18:42
- Re: PB Blast, bob, 18:34
- Re: TR3/4 Cooling System Pipe, Michael Ferguson, 18:21
- TR3/4 Cooling System Pipe, Suggitt, 17:29
- RE: fuel pump pressure, Jim Altman, 17:26
- Re: TR4 - where's the CT number on diff?, PeterSchop, 17:23
- TR3 Control Head/Horn Button - Dumb Question, Stephen Peca, 17:18
- OD, Ronnie Babbitt, 17:01
- Stromberg, Ct54531, 16:53
- Inter marque waving, Sumner Weisman, 16:40
- Electrical question, Sumner Weisman, 16:40
- Re: Monza Exhaust, Paul J. Burr, 15:45
- Western Pennsylvania Triumph Association, Gerald Van Vlack, 15:36
- Re: fuel pump problem, Steve Daniels, 15:34
- fuel pump problem, Jay Snavely, 15:21
- fuel pump pressure, Jay Snavely, 15:21
- OD, Ronnie Babbitt, 14:59
- Re: TR6 buying tips, Daniel Julien, 12:55
- TR4 - where's the CT number on diff?, PeterSchop, 12:00
- Gas Tanks, Steve Daniels, 11:26
- Re: TR6 buying tips, Michael Ferguson, 11:21
- TR6 buying tips, Paul Waite/Ontario/IBM, 10:39
- Monza Exhaust, STEVE ROHAL, 08:52
- No Reverse Lights, David Massey, 08:09
- Re: Dan Masters, David Massey, 08:09
- Re: Inter-Marque Waving???, David Massey, 08:08
- Re: TR6 brake hydraulics (rather wordy), Randall Young, 07:50
- Re: Vibration in a 76 TR6, Jim Davis, 05:30
- TR6 Parts in Paper, WBabbitt, 05:19
- Toyota Throwout Bearing, jay_welch, 04:09
- TR6 brake hydraulics (rather wordy), jay_welch, 04:04
- TR6 brake hydraulics (rather wordy), jay_welch, 04:04
- Re: Sitfire question, Michael Hargreave Mawson, 01:06
May 05, 2001
- TR4 Rear "Clunk" fixed, Pat, 21:44
- Sitfire question, Dietmar Schlei, 21:37
- Re: Alarms and power door locks., Paul Tegler, 20:18
- Re: Alarms and power door locks., Joe Curry, 20:10
- Alarms and power door locks., Paul Tegler, 20:04
- Re: Electrical question..., Bill Kelly, 19:33
- Re: PB Blast, Herald948, 18:02
- Re: No Reverse Lights, Randall Young, 17:47
- Re: speedometers etc., Nelson A. Riedel, 17:32
- Re: Inter marque waving, Joe Curry, 17:01
- speedometers etc., Bob Rochlin, 17:01
- Inter marque waving, John Macartney, 16:53
- TR6 Seat reupholstery advice wanted, corey.sherman, 15:59
- PB Blast, Don Sforza, 15:53
- No Reverse Lights, R. Ashford Little II, 15:36
- Re: Dan Masters, ArthurK101, 15:23
- Re: Electrical question..., ArthurK101, 15:18
- Re: Battery Group, Randall Young, 14:47
- Battery Group, Ct54531, 14:09
- IoW TSSC Camping Weekend, Graham Stretch, 14:04
- TR6 started running poorly, Kyle K. Rice, 12:32
- Re: Inter-Marque Waving???, Rave Racer, 12:02
- 1958 TR3A project for sale, Cliff Pike, 11:50
- Re: TR3a fenders, HAMILTON DOUG, 11:38
- Vibration in a 76 TR6, Dane Connell, 10:51
- Re: Electrical question..., Steven Newell, 10:42
- Re: welding re-send, DRSkruffy, 10:41
- Re: Inter-Marque Waving???, ElangTR4, 10:25
- Re: TR2/3/4 rear main seals yet again., George Richardson, 08:11
- Re: Inter-Marque Waving???, David Massey, 07:37
- Re: Inter-Marque Waving???, David Massey, 07:36
- Re: Inter-Marque Waving???, David Massey, 07:36
- 3a frame central box, a Wallace, 06:51
- OD for TR4 Successful - Thanks, Brian Sanborn, 06:27
- RE: Restarting 15 year stopped GT6, Jim Altman, 05:19
- Re: Inter-Marque Waving???, ebk, 02:49
- "FS : Sunbeam Alpine", ebk, 02:38
- Re: the welding thread (again!), Randall Young, 01:04
- Re: Electrical question..., Randall Young, 00:56
- Electrical question..., Phil Pattengale, 00:07
May 04, 2001
- RE: welding re-send, Ken Gano, 23:51
- Re: the welding thread (again!), Karl Vacek, 21:39
- Re: TR2/3/4 rear main seals yet again., Fred Thomas, 17:29
- Re: welding re-send, DRSkruffy, 17:24
- Re: welding re-send, Adrian, 17:23
- Re: the welding thread (again!), John Middlesworth, 16:33
- TR2/3/4 rear main seals yet again., Drew Rogge, 16:28
- RE: Dan Masters, Patrick Bitton, 16:14
- Re: Dan Masters, Fred Thomas, 15:56
- Re: Dan Masters, Edward Woods, 15:51
- Re: TR3a fenders, Gbouff1, 15:43
- RE: TR4A - POD'd now poor electrical connections, Randall Young, 14:31
- welding re-send, Douglas Frank, 13:30
- Re: Restarting 15 year stopped GT6, Rave Racer, 13:15
- Re: Dan Masters, DANMAS, 13:12
- RE: Dan Masters, David A. Templeton, 12:51
- Re: Dan Masters, Lftlesl, 12:48
- Re: TR4A - POD'd now poor electrical connections, HAMILTON DOUG, 12:42
- Re: Restarting 15 year stopped GT6, Douglas Frank, 12:24
- 3a frame central box, wallaces, 11:22
- Re: Dan Masters, Raymond Hatfield, 11:12
- Re: Dan Masters, Fred Thomas, 10:43
- Inter-Marque Waving???, Bill Pugh, 10:17
- Re: TR3 Handbrake, Dash placque, etc., Steven Newell, 10:14
- Re: Inter-Marque Waving???, Steven Newell, 10:01
- TR3a fenders, David Templeton, 09:43
- TR3 Handbrake, Dash placque, etc., Mike Barron, 09:37
- re: inter-marque waving, avhodge, 08:18
- Re: Inter-Marque Waving???, Joe Curry, 08:00
- TR4 - Used Carpet Set Available, Brian Sanborn, 07:45
- Re: Inter-Marque Waving???, Herald948, 07:40
- Re: Restarting 15 year stopped GT6, Herald948, 07:38
- RE: Dan Masters, Bowen, Patrick, 07:38
- OD Relay Placement - TR4, Brian Sanborn, 07:14
- The Wave, Michael Cook, 07:00
- (no subject), Harlyred1, 06:28
- RE: UK TR7 carburetor/engine questions, Anthony Rhodes, 06:09
- RE: Dan Masters, Bowen, Patrick, 06:05
- Re: Inter-Marque Waving???, suhring, 04:40
- Restarting 15 year stopped GT6, Rave Racer, 02:35
- Re: more brake repair adventures, Randall Young, 00:44
May 03, 2001
- Re: Inter-Marque Waving???, Phil Ethier, 22:07
- Re: more brake repair adventures, Irv Korey, 21:22
- Re: Inter-Marque Waving???, Richard White, 20:52
- Dan Masters, Edward Woods, 20:15
- Re: Inter-Marque Waving???, Rave Racer, 20:08
- Re: waving, Rave Racer, 20:04
- Re: Inter-Marque Waving???, Rave Racer, 19:57
- more brake repair adventures, Richard White, 19:56
- Re: Inter-Marque Waving???, TexasTR4, 18:20
- Re: After action report on the steering wheel change..., TexasTR4, 18:14
- Re: TR4A - POD'd now poor electrical connections, HAMILTON DOUG, 17:46
- Re: Inter-Marque Waving???, Scott A. Roberts, 17:42
- TR-6 Door Striker, Patrick Bitton, 17:38
- Re: After action report on the steering wheel change..., Scott A. Roberts, 17:32
- Re: cylinder head, David Massey, 17:32
- Re: Inter-Marque Waving???, David Massey, 17:29
- Re: UK TR7 carburetor/engine questions, David Massey, 17:29
- Type 12 Caliper Kits, Scott A. Roberts, 17:28
- Re: Inter-Marque Waving???, Michael Ferguson, 17:27
- Re: Inter-Marque Waving???, Don Marshall, 17:27
- Re: Inter-Marque Waving???, Bob Labuz, 17:23
- Re: cylinder head, Alan, 17:23
- waving, Fred Thomas, 16:50
- Re: Inter-Marque Waving???, Graham Stretch, 16:36
- RE: UK TR7 carburetor/engine questions, Randall Young, 16:21
- Re: Inter-Marque Waving???, Steven Newell, 16:16
- Re: Inter-Marque Waving???, Martin Secrest, 16:14
- Re: UK TR7 carburetor/engine questions, Anthony Rhodes, 16:07
- RE: Inter-Marque Waving???, Musson, Carl, 16:05
- Re: New Sills prep TR6, Graham Stretch, 15:57
- Re: Inter-Marque Waving???, GreenBugeye, 15:36
- RE: Inter-Marque Waving, Peter Zaborski, 15:32
- Inter-Marque Waving, Arakelian, Peter, 15:26
- Re: TR4A - POD'd, ArthurK101, 14:52
- the welding thread (again!), Douglas Frank, 14:13
- Inter-Marque Waving???, Kai M. Radicke, 14:11
- New Sills prep TR6, Steve Coupe, 13:59
- Re: TR4A - POD'd, TeriAnn Wakeman, 11:41
- TR3 Handbrake, placque on dash about how to operate, Mike Barron, 11:40
- Re: cylinder head, David Massey, 11:28
- Re: Parts Suppliers in Florida, WLSServ, 11:00
- Re: TR4A - POD'd, Matt Ritter, 10:54
- No Spark ???, Taffel, Sherman, 10:46
- Re: TR4A - POD'd, ArthurK101, 10:40
- Parts Suppliers in Florida, Patrick Bitton, 10:16
- Re: Feline Spit Driver!, Anthony Gordon, 09:29
- Re: Electric Fan Relay on a 1980 Spit, DANMAS, 08:30
- Re: cylinder head, Jack W. Drews, 08:12
- Fwd: Feline Spit Driver - Update!, Chip19474, 08:12
- Re: cylinder head, Chip19474, 07:51
- Re: UK TR7 carburetor/engine questions, Randall Young, 07:50
- After action report on the steering wheel change..., Freeman, Noah, 07:43
- RE: Weekends Work!, Brian Sanborn, 07:32
- Re: UK TR7 carburetor/engine questions, David Massey, 06:37
- Happy B'day, dear TR - Happy B'day to you!, John Day, 06:22
- Windsheild/OD Wiring, James Fowler, 05:40
- Re: UK TR7 carburetor/engine questions, Anthony Rhodes, 05:34
- RE: Electric Fan Relay on a 1980 Spit, S Twigg, 03:42
May 02, 2001
- Thanks re: O/D oil, R. Ashford Little II, 22:30
- Re: Not TRIUMPH, but Br. car info., Randall Young, 20:27
- Not TRIUMPH, but Br. car info., ebk, 20:15
- re:UK TR7 carburetor/engine questions, Anthony Rhodes, 19:59
- Re: OD Switch - rework for TR4 successful, KTnKT, 19:57
- RE: to restore or not, Roy, 19:30
- Tubes in tubless tires, Mike Barron, 18:59
- Soft Tops, Williams, Bill (Atlanta), 18:57
- TR3 wiring Question, Sumner Weisman, 18:03
- Weekends work!, Graham Stretch, 17:05
- UK TR7 carburetor/engine questions, Anthony Rhodes, 16:59
- Weekends Work!, Graham Stretch, 16:54
- Re: help TR3A rheostats, HAMILTON DOUG, 16:52
- Re: Tubeless Tires & Tubes?, Scott A. Roberts, 16:10
- Re: To restore or not to restore?, Steven Newell, 15:55
- Re: Tubeless Tires & Tubes?, Graham Stretch, 15:11
- Tubeless Tires & Tubes?, David Massey, 15:07
- TR4A - POD'd, January Williams, 14:32
- Re: OD Switch - Rework for TR4 Successful, Graham Stretch, 13:44
- Re: help TR3A rheostats, Pat Mullen, 13:43
- GT6 MK1, James V Laviana III, 13:19
- Tubeless Tires & Tubes?, john donnelly, 12:53
- RE: OD Switch - Rework for TR4 Successful, Peter Zaborski, 12:33
- RE: OD Switch - Rework for TR4 Successful, Brian Sanborn, 12:13
- Re: cylinder head, David Massey, 12:11
- Re: help TR3A rheostats, HAMILTON DOUG, 12:11
- RE: TR3a bodywork & paint, David A. Templeton, 12:09
- Re: The scoop on MotorHead, Martin Secrest, 12:08
- RE: TR3a bodywork & paint, Bowen, Patrick, 11:47
- RE: TR3a bodywork & paint, David A. Templeton, 11:43
- Re: 75 TR6 Radiator Top Hose, TAYLOR,KEITH M (HP-Corvallis,ex1), 10:50
- RE: Heater Wiring, Justin Paxton, 10:26
- RE: Heater Wiring, Randall Young, 10:16
- RE: OD Switch - Rework for TR4 Successful, Randall Young, 09:53
- Re: StarterProblem - 1974 TR6, DANMAS, 09:37
- RE: Heater Wiring, Justin Paxton, 09:33
- Thanks for Motorhead inputs, frandrum, 09:10
- Re: OD Switch - Rework for TR4 Successful, Fred Thomas, 08:40
- Re: Early TR4 Trunk Prop Rod, Phil Ethier, 08:39
- Re: cylinder head, Erik Quackenbush, 08:23
- Re: The scoop on MotorHead, Brian Borgstede, 08:11
- OD Switch - Rework for TR4 Successful, Brian Sanborn, 08:00
- Re: RE:High Idle on TR4A FIXED (check your PCV valve), Fred Thomas, 07:37
- RE:High Idle on TR4A FIXED (check your PCV valve), slarch, 06:24
- Early TR4 Trunk Prop Rod teamfat2.dsl.aros.net id f42CIXR26319, Paul Brandsema, 06:19
- RE: Electric Fan Relay on a 1980 Spit, Bowen, Patrick, 06:01
- Till våra kunder, Adam Turner, 01:57
- help TR3A rheostats, HAMILTON DOUG, 01:22
- Re: To restore or not to restore?, Rave Racer, 00:19
May 01, 2001
- Re: Heater Wiring, Randall Young, 22:19
- Steve Seckerich (please contact me), Twistblts, 22:06
- Re: cylinder head, Alan, 22:02
- TR4 Ansen slotted mags, Twistblts, 22:02
- Tr6 front rotors, Kyle K. Rice, 22:01
- Heater Wiring, Justin Paxton, 21:20
- Re: To restore or not to restore?, Gospitt, 21:18
- Re: To restore or not to restore?/ girlfriend, TeriAnn Wakeman, 20:55
- Re: Master cylinder seals, Nelson A. Riedel, 20:54
- Feline Spit Driver!, David Massey, 20:33
- Wire Wheels, David Massey, 20:32
- cylinder head, David Massey, 20:32
- High Idle on TR4A FIXED (check your PCV valve), David Massey, 20:31
- Re: To restore or not to restore?/ girlfriend, Kai M. Radicke, 20:18
- Re: To restore or not to restore?/ girlfriend, Edward Woods, 20:02
- Electric Fan Relay on a 1980 Spit, S Twigg, 19:56
- Re: To restore or not to restore?, Steve Daniels, 19:46
- Throttle Pedal, Harrymague, 19:43
- TR6 head gasket advice needed, Keith Ehrlich, 19:21
- cylinder head, Alan, 19:12
- Re: 75-76 tr6 air manifold, Alan, 19:06
- Re: To restore or not to restore?, Paul J. Burr, 19:04
- Wire Wheels, Bob Rochlin, 19:03
- right angle drive, Edward Woods, 18:52
- TR250 wiper switch, Edward Woods, 18:52
- looking for Alan Jones / Adam Killick, Dan Buettner, 17:35
- Re: Pressed in plugs in gearbox top cover, Graham Stretch, 17:22
- Re: 3 ZSs, Graham Stretch, 16:45
- TR3a bodywork & paint, David Templeton, 16:31
- Part Needed, Patrick Bitton, 15:43
- RE: To restore or not to restore?, Patrick Bitton, 15:41
- Re: A-type O/D Oil?, Graham Stretch, 15:33
- Re: A-type O/D Oil?, Graham Stretch, 15:23
- RE: To restore or not to restore?, Ken Gano, 15:13
- RE: To restore or not to restore?, Randall Young, 14:30
- Re: To restore or not to restore?, Fred Thomas, 14:06
- To restore or not to restore?, Evan Johnstone, 13:33
- Re: OD Switch Placement and Update, Graham Stretch, 13:32
- Modifying tools, was Re: Spit Carb removal, Graham Stretch, 13:32
- TR3a handbrake continued., Crockett, Steve, 12:42
- Re: The scoop on MotorHead, Nolan Penney, 12:20
- Re: 75-76 tr6 air manifold, Jeff Johnson, 11:37
- Re: Side Curtins, George Richardson, 11:14
- High Idle on TR4A FIXED (check your PCV valve), slarch, 10:50
- Side Curtins, James Fowler, 10:32
- Triple Z's, Joe Merone, 10:31
- Feline Spit Driver!, Chip19474, 10:27
- The scoop on MotorHead, frandrum, 10:18
- Re: tr6 head gasket advice needed, Erik Quackenbush, 09:53
- Re: When computers got involved with car manufacture..., Rave Racer, 02:27
- Re: Subject: Re: TR3a handbrake, john matthews, 00:36
- re: Fixes im working on..., john matthews, 00:30