Al;
I did this last year. I had to drill out every nut that held the injectors
in and tapped to 1/2" 20 tpi. Got some allen head set screws (available
most anywhere) and I was set. Also, if you are going to the trouble of
replacing your smog pump and injection manifold, why not take the egr valve
out also? The correct size for the resulting hole is 3/4" 16tpi. You can
also get thatin a set screw, but you'll probably have to order it from your
local fastener supply house.
Cheers,
Jeff Johnson
'76 TR6
At 10:15 PM 4/27/01 -0400, Alan wrote:
>My air manifold has developed a leak; If i take it off does anyone know what
>size plugs are needed to seal the exhaust manifold.
>thanks
>al salvatore
>76 tr6
///
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
///
|