> From: Arakelian, Peter [mailto:arakelianp@mossmotors.com]
> Sent: Tuesday, May 15, 2001 1:22 PM
>
> I made one mistake fitting the "foam" to the driver seat
> side bolster which made the cardboard insert press and
> eventually tear through the seam of the cover.
I've never done this job but I can see from some of the descriptions that
it's a potentially lengthy operation. One tip I gleaned from Peter A's post
is that for first timers it's probably better to do the passenger seat
first. Assuming you will make even a slight error on the first one, at least
the seat which gets used the most (ie. the driver seat) will have the
benefit of that experience.
Peter Zaborski (CF58310 UO)
///
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
///
|