triumphs
[Top] [All Lists]

Re: 75-76 tr6 air manifold

To: "Jeff Johnson" <mondolux@speakeasy.net>
Subject: Re: 75-76 tr6 air manifold
From: "Alan" <asalvato@tampabay.rr.com>
Date: Tue, 1 May 2001 21:12:52 -0400
Cc: <triumphs@autox.team.net>
References: <200105011735.f41HZWR04715@teamfat2.dsl.aros.net>
hi jeff
I  had already pluged the egr valve, but i had to use a bolt; nobody had a
set screw that size or was willing to get one.  I am waiting for a new
manifold gasket before tackeling the air pipe.  I've been spraying it with
wd 40; but the nuts don't want to budge yet.
regards
al
----- Original Message -----
From: "Jeff Johnson" <mondolux@speakeasy.net>
To: "Alan" <asalvato@tampabay.rr.com>; <triumphs@autox.team.net>
Sent: Tuesday, May 01, 2001 1:25 PM
Subject: Re: 75-76 tr6 air manifold


>
> Al;
> I did this last year. I had to drill out every nut that held the injectors
> in and tapped to 1/2" 20 tpi. Got some allen head set screws (available
> most anywhere) and I was set. Also, if you are going to the trouble of
> replacing your smog pump and injection manifold, why not take the egr
valve
> out also? The correct  size for the resulting hole is 3/4" 16tpi. You can
> also get thatin a set screw, but you'll probably have to order it from
your
> local fastener supply house.
>
> Cheers,
>
> Jeff Johnson
> '76 TR6
>
> At 10:15 PM 4/27/01 -0400, Alan wrote:
>
> >My air manifold has developed a leak; If i take it off does anyone know
what
> >size plugs are needed to seal the exhaust manifold.
> >thanks
> >al salvatore
> >76 tr6

///
///  triumphs@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe triumphs
///
///


<Prev in Thread] Current Thread [Next in Thread>