6pack (date)
June 30, 2003
- Need a Piston, Gregory Dito, 22:13
- Residual Presure Valve for Front Brakes, Cris Hemingway, 21:38
- Re: Ballast resistor question, Don Malling, 19:44
- Re: Ballast resistor question, Gary Fluke, 19:42
- RE: Ballast resistor question, Hugh Fader, 19:29
- roller rocker install, Gene Holtzclaw, 19:23
- Re: Ballast resistor question, Mark Anderton, 18:35
- RE: Ballast resistor question, Jim Swarthout, 18:20
- DIY brake/clutch pressuer bleeder -- from shop-talk, Don Malling, 18:10
- RE: Ballast resistor question, Navarrette, Vance, 17:39
- RE: Ballast resistor question, Jim Swarthout, 17:18
- RE: Distributor Orientation, Jim Swarthout, 17:02
- Re: Ballast resistor question, Sally or Dick Taylor, 16:55
- Re: Ballast resistor question, Mark Anderton, 16:50
- Re: Distributor Orientation, Sally or Dick Taylor, 16:40
- RE: TSI Roller Rockers, Mike Munson, 15:26
- RE: Ballast resistor question, Navarrette, Vance, 14:54
- Distributor Orientation, Gameparker, 14:54
- Ballast resistor question, TR6 Triumph, 13:54
- FS: 1971 TR6 in Fort Wayne, IN, Jon, 13:49
- Re: running great - finally, Gary Fluke, 12:54
- Re: Starter, Gary Fluke, 12:48
- running great - finally, Walt Philipson, 11:33
- Starter, Don Aldous, 10:58
June 29, 2003
- Re: TR6 Restoration, josh duncan, 22:40
- RE: Fresh Engine Start-up Advice, Jim Swarthout, 21:33
- Re: Fresh Engine Start-up Advice, Gameparker, 21:25
- RE: Fresh Engine Start-up Advice, Jim Swarthout, 21:14
- RE:, Hugh Barber, 21:06
- RE: FUEL PUMPS/FILTERS/REAR END ALINMENTS or -6 TWITCH, Jim Swarthout, 21:03
- RE: Rocker alignment, Jim Swarthout, 20:50
- Fresh Engine Start-up Advice, josh duncan, 20:49
- roller rockers, Alan, 20:39
- Fresh Engine Start-up Advice, Gameparker, 20:37
- Roller Rockers, Alan, 20:11
- RE: TSI Roller Rockers, Mark Hooper, 19:30
- Ballast bypass, Gary Fluke, 19:29
- RE: TSI Roller Rockers, Jim Swarthout, 17:52
- RE: FUEL PUMPS/FILTERS/REAR END ALINMENTS or -6 TWITCH, Jim Davis, 15:20
- Re: FUEL PUMPS/FILTERS/REAR END ALINMENTS or -6 TWITCH, Mark Anderton, 15:08
- Re: TSI Roller Rockers, Nick Gemas, 13:48
- Dan Masters ?, Nick Gemas, 12:30
- Re: FUEL PUMPS/FILTERS/REAR END ALINMENTS or -6 TWITCH, Lizirbydavis, 12:16
- Re: FUEL PUMPS/FILTERS/REAR END ALINMENTS or -6 TWITCH, StangGuy67, 11:02
- FUEL PUMPS/FILTERS/REAR END ALINMENTS or -6 TWITCH, RazorBobSr, 09:55
June 28, 2003
- TSI Roller Rockers, Nick Gemas, 19:14
- Re: Reconditioned Dampers, Mitchel Seff, 16:01
- Re: CF37325U, AKATR5, 15:34
- Re: CF37325U, Tommy Thompson, 13:41
- Re: Reconditioned Dampers, Gregory Dito, 12:49
- Re: Reconditioned Dampers, Mitchel Seff, 11:41
- Re: CF37325U, YeOldEd, 11:33
- Re: Clutch and Gunst, Mark Anderton, 08:40
June 27, 2003
- Re: Clutch and Gunst, Sally or Dick Taylor, 23:27
- Clutch and Gunst, TRDOCTOR, 22:46
- Flywheel weight, john davis, 20:48
- RE: CF37325U, AKATR5, 18:47
- Reconditioned Dampers, Gregory Dito, 17:34
- SUMMARY: TR-250 freeze plug r&r, Skip Montanaro, 09:17
- FW: CF37325U photos, Jim Davis, 07:12
June 26, 2003
- Need recommendations for a radiator fan sensor, Rick, 22:24
- RE: CF37325U photos, Jim Swarthout, 18:29
- Re: CF37325U photos, Skip Montanaro, 18:03
- Re: FW: CF37325U photos, StangGuy67, 17:00
- FW: CF37325U photos, Jim Davis, 15:42
- FW: CF37325U photos, Jim Davis, 15:26
- headers comparison, Lizirbydavis, 09:56
- RE: dancing ammeter, Mark Hooper, 07:32
- dancing ammeter, Lizirbydavis, 07:10
- Re: CF37325U photos, Tommy Thompson, 05:30
- CF37325U photos, Jim Davis, 04:24
- Re: Two TR250 issues, Sally or Dick Taylor, 00:57
June 25, 2003
- RE: Two TR250 issues, Andrew Packard, 21:56
- RE: Two TR250 issues, Andrew Packard, 21:54
- RE: Two TR250 issues, Jim Swarthout, 20:21
- Re: Two TR250 issues, Gregory Dito, 19:04
- RE: Two TR250 issues, Jay Snable, 18:52
- RE: Body Shimming, Andrew Packard, 17:58
- Need recommendations for a radiator fan sensor, Gameparker, 17:57
- Body Shimming, Colin Grimes, 17:45
- Re: Two TR250 issues, Gregory Dito, 17:38
- RE: Two TR250 issues, Andrew Packard, 17:15
- Two TR250 issues, Andrew Packard, 17:00
- RE: Calling on Camshaft Experts, I need advice, Simms, Bruce CIC, 16:54
- RE: Transmission Leak, Jim Davis, 16:36
- RE: Transmission Leak, Stephen Hanselman, 09:22
- Oil Starvation-- Solution needed, Chuck Arnold, 07:25
June 24, 2003
- Transmission Leak, Acekraut11, 22:14
- Re: GL 4, Kai M. Radicke, 22:13
- GL 4, YeOldEd, 21:41
- RE: TR-250 freeze plug r&r, britauto, 20:28
- RE: Valve adjustment, Jim Davis, 15:35
- RE: Problems at 4500 RPM, Jim Davis, 15:25
- Re: TR6 Gasoline, Ted Schumacher, 14:56
- Re: TR6 Gasoline, Sally or Dick Taylor, 14:53
- RE: TR6 Gasoline, steve bridge, 12:32
- RE: TR6 Gasoline, Robert M. Lang, 12:27
- RE: TR6 Gasoline, Philip E. Barnes, 12:19
- RE: Problems at 4500 RPM, Robert M. Lang, 12:04
- Re: Timing Marks on Dampner, Robert M. Lang, 11:51
- RE: TR6 Gasoline, steve bridge, 11:36
- Re: TR6 Gasoline, Philip E. Barnes, 09:54
- RE: TR6 Gasoline, Mark Hooper, 09:10
- Re: fuel gauge is fogging up, James_ TR6, 08:49
- Re: fuel gauge is fogging up, Robert M. Lang, 07:56
- RE: Valve adjustment, Jim Davis, 07:29
- RE: BL Badge location, Rob Christopher \(robc\), 07:25
- Re: K&N Filters, cm.sherman, 05:54
- TR6 parts for sale, Joe18d, 03:02
- Re: TR6 Gasoline, Kendall Larsen, 02:16
- Forwarded: Rule Brittania!, lists, 01:42
- Re: Triple Carb TR6 Owners - One Question Please!, Rob Pennington, 00:08
June 23, 2003
- Kent Prather, was Installed Defective Cam. Need Advice On New, Irv Korey, 22:31
- RE: Problems at 4500 RPM, Jim Swarthout, 22:02
- RE: Problems at 4500 RPM, Jim Swarthout, 21:32
- Timing Marks on Dampner, Gameparker, 21:20
- Re: Head Gasket Installation, Timothy Holbrook, 20:08
- Re: Head Gasket Installation, Robert L. Gannon, 19:47
- Re: Installed Defective Cam. Need Advice On New One, Don Malling, 19:39
- Head Gasket Installation, Timothy Holbrook, 19:36
- e: Installed Defective Cam. Need Advice On New One, Chuck Arnold, 19:13
- Re: Valve adjustment, William Maslin, 17:54
- Re: Valve adjustment, Gary Fluke, 17:09
- Re: Triple Carb TR6 Owners - One Question Please!, Todd Bermudez, 16:20
- Triple Carb TR6 Owners - One Question Please!, Chip19474, 15:27
- Re: Rear Main Oil Seal, Gene Holtzclaw, 15:20
- Re: Rear Main Oil Seal, Sally or Dick Taylor, 13:21
- Re: Tires: 215/70 v. 205/70? (replacing bad Cokers), Sally or Dick Taylor, 13:07
- RE: Valve adjustment, Jim Davis, 12:43
- Re: Problems at 4500 RPM, Ted Schumacher, 11:32
- Valve adjustment, Jim Davis, 11:23
- Re: Tires: 215/70 v. 205/70? (replacing bad Cokers), Mark Martin, 10:30
- Tires: 215/70 v. 205/70? (replacing bad Cokers), William Maslin, 08:48
- Follow-up - Front Number Plate '74 TR6, Don Hasara, 08:46
- Rear Main Oil Seal, adearist, 08:41
- Re: Defective Cam - Status/Update, Jay Welch, 08:03
- K&N Filters, James Jerrel, 07:51
- Re: Number Plate Holder, Crazeecooter, 07:18
- RE: Buckeyetriumph.org, Creamer, Mark, 07:00
- Re: Defective Cam - Status/Update, Gregory Dito, 06:59
- RE: TR6 Engine Stutter, Lizirbydavis, 06:34
- RE: Rule Brittania!, Mark Hooper, 06:30
- Defective Cam - Status/Update, Bob Fabie, 06:24
- TR6 Gasoline, Keith Graves, 06:15
- Re: ominous tranny noise, Jay Welch, 06:02
- (no subject), RazorBobSr, 05:47
- Quest to find a front number plate, Don Hasara, 05:37
- RE: ominous tranny noise, Mark Creamer, 05:31
- Number Plate Holder, Don Hasara, 05:20
- Rule Brittania!, John Griffiths, 04:48
- Re: Buckeyetriumph.org, Don Malling, 04:47
- Re: Buckeyetriumph.org, Don Malling, 04:46
- Re: Buckeyetriumph.org, Don Malling, 04:44
- Re: Problems at 4500 RPM, Gary Fluke, 01:04
June 22, 2003
- RE: Problems at 4500 RPM, Jim Swarthout, 23:53
- Buckeyetriumph.org, Sally or Dick Taylor, 23:38
- RE: ominous tranny noise, Sally or Dick Taylor, 23:12
- RE: Problems at 4500 RPM, Sally or Dick Taylor, 22:15
- RE: ominous tranny noise, Jim Swarthout, 21:25
- RE: Problems at 4500 RPM, Jim Swarthout, 20:46
- Re: ominous tranny noise, Gary Fluke, 20:37
- Re: Installed Defective Cam. Need Advice On New One, Mitchel Seff, 20:24
- Re: Installed Defective Cam. Need Advice On New One, Bob Fabie, 20:21
- TR6 Engine Stutter, Woollcotts, 19:06
- RE: ominous tranny noise, Jim Davis, 18:41
- Re: Roller Rockers & Cast Aluminum Valve Covers/Lengthy!, Jim Swarthout, 18:18
- RE: ominous tranny noise, Mark Creamer, 15:58
- RE: Installed Defective Cam. Need Advice On New One, Hugh Fader, 15:20
- tr6 manuals on cd-rom, Peter Zaborski, 11:17
- RE: K&N Air Filters, Saul W. Adelman, 10:59
- RE: K&N Air Filters, Keith Meinhold, 10:09
- ominous tranny noise, Mark Creamer, 09:07
- Re: K&N Air Filters, Bob Fabie, 08:31
- Re: Installed Defective Cam. Need Advice On New One, Bob Fabie, 08:21
- Re: Re: Installed Defective Cam. Need Advice On New One], Bob Fabie, 08:11
- Re: Installed Defective Cam. Need Advice On New One, Bob Fabie, 08:06
- K&N Air Filters, Saul W. Adelman, 06:35
- Re: Installed Defective Cam. Need Advice On New One, Mitchel Seff, 06:34
- Re: Installed Defective Cam. Need Advice On New One, Jadewey211, 05:43
- Re: electrical problem?, Sally or Dick Taylor, 00:01
June 21, 2003
- Re: Problems at 4500 RPM, Sally or Dick Taylor, 23:48
- [Fwd: Re: Installed Defective Cam. Need Advice On New One], Don Malling, 23:27
- Re: Underfelt kits, mitch vamos, 22:54
- RE: TR250 wiper moter housing finish, Andrew Packard, 22:42
- Re: Installed Defective Cam. Need Advice On New One, David Friedlander, 21:44
- Installed Defective Cam. Need Advice On New One, Bob Fabie, 20:56
- Re: Problems at 4500 RPM, Seth Glassman, 19:38
- Re: electrical problem?, Dale, 17:51
- Re: Problems at 4500 RPM, Mitchel Seff, 17:11
- TR250 wiper moter housing finish, Don Malling, 16:30
- RE: electrical problem?, Steve Hanselman, 16:01
- Re: Underfelt kits, John Mitchell, 15:28
- Re: Underfelt kits, Lizirbydavis, 15:19
- Cam locking tab, mitch vamos, 13:05
- TR-250 freeze plug r&r, Skip Montanaro, 13:04
- RE: Conversion to a Sentra M/C and Servo, Hugh Barber, 11:51
- Centenary Run pix, jonmac, 10:59
- Conversion to a Sentra M/C and Servo, Pat Leask, 09:36
- Underfelt kits, John Mitchell, 08:54
- Re: Gearbox problem?, Trumpet76TR6, 08:49
- Re: Gearbox problem?, Dave Mahlmeister, 08:04
- Gearbox problem?, John North, 06:33
June 20, 2003
- RE: Oh yes "we're back", Jim Swarthout, 20:44
- RE: Problems at 4500 RPM, Andrew Packard, 20:29
- RE: Problems at 4500 RPM, Jim Swarthout, 20:16
- Re: electrical problem?, Mark Bullard, 19:59
- electrical problem?, Mark Bullard, 19:40
- Re: Problems at 4500 RPM, Sally or Dick Taylor, 18:38
- Re: Calling on Camshaft Experts, I need advice, Sally or Dick Taylor, 18:05
- Problems at 4500 RPM, Seth Glassman, 17:32
- Calling on Camshaft Experts, I need advice, Simms, Bruce CIC, 16:53
- fuel gauge is fogging up, britishtr6, 16:23
- Re: Virus, Gary Fluke, 11:56
- Speedometer not working..., Dwayne Cooper, 11:33
- Re: electrical problem: dummy dash lights, Dale, 10:30
- Re: Virus, Walt Boeninger, 09:37
June 19, 2003
- Re: The Last Open Road, KTnKT, 20:21
- Virus, john.harriet, 18:39
- SCCA Solo II DC nat'l Tour, Robert M. Lang, 15:29
- Re: electrical problem: dummy dash lights, James Tabor, 13:36
- RE: electrical problem: dummy dash lights, Creamer, Mark, 12:45
- Re: electrical problem: dummy dash lights, Gary Fluke, 12:43
- The Last Open Road, R. Ashford Little II, 09:20
- electrical problem: dummy dash lights, James Tabor, 08:34
- Crank bold replacement, Chuck Arnold, 07:21
- RE:Fan extension bolts, Chuck Arnold, 07:17
June 18, 2003
- RE: Anyone in Miami?, Gary R., 21:03
- Re: Fan Extension Modification, Mitchel Seff, 19:15
- RE:, Rick, 18:45
- Re: Fan Extension Modification, mitch vamos, 18:34
- Re: Fan Extension Modification, David Friedlander, 17:18
- Anyone in Miami?, Neil Wehmeyer, 16:42
- Re: Fan Extension Modification, mitch vamos, 16:37
- TR-6 SPOTTED IN NC, Walt Philipson, 15:10
- Re: Fan Extension Modification, Lizirbydavis, 15:00
June 17, 2003
- TR4/4A/5/250 Lamp Gaskets, Todd Bermudez, 20:51
- TR4/4A/5/250 Lamp Gaskets, Todd Bermudez, 20:51
- RE: Milestone, Peter Zaborski, 20:37
- Fan Extension Modification, Gameparker, 19:08
- Re: Milestone, StangGuy67, 15:37
- Milestone, ShewFamily, 14:58
- TR6 Ignition, Don Aldous, 11:02
June 16, 2003
- TR6 Too Tall Springs, britauto, 23:18
- Anyone near Tampa FL available to inspect a car?, TR6 Triumph, 21:16
- Mystery ground wire & broken hazard switch, Mickylong, 19:35
- Re: SOS - New Oil Pan, Gregory Dito, 13:46
- Re: SOS - New Oil Pan, Sally or Dick Taylor, 13:20
- Re: Plugs and sputtering, Sally or Dick Taylor, 13:13
- SOS - New Oil Pan, Gameparker, 12:50
- RE: Plugs and sputtering, Stephen Hanselman, 11:57
- Plugs and sputtering, Tarnow, Joshua, 08:30
- Reomve from list, louis embrey, 05:43
- Re: Seat Runners, Don Malling, 03:58
June 15, 2003
- Re: Tranny Drain Plug...., Todd Bermudez, 21:13
- Tranny Drain Plug...., Navarrette, Vance, 20:58
- RE: Seat Runners, Hugh Fader, 20:54
- Seat Runners, Gary R., 20:45
- Re: Lft Rear wheel arch #, where the heck did that come from?, Richard Seaton, 20:21
- Re: Can Servo's be rebuilt ?, Don Malling, 18:16
- Re: M/C problem.. HELP !, Sally or Dick Taylor, 17:22
- Can Servo's be rebuilt ?, Pat Leask, 16:49
- M/C problem.. HELP !, Pat Leask, 16:05
- Re: Lft Rear wheel arch #, where the heck did that come from?, Richard Seaton, 12:46
- Re: Lft Rear wheel arch #, where the heck did that come from?, Richard Seaton, 12:37
- Re: 1971 TR6, Mark Bullard, 12:24
- Lft Rear wheel arch #, where the heck did that come from?, Richard Seaton, 10:24
June 14, 2003
- Re: dash top pad adhesive?, Sally or Dick Taylor, 19:31
- dash top pad adhesive?, James A TenCate, 18:20
- Re: 1971 TR6, Mitchel Seff, 17:14
- Re: 1971 TR6, Sally or Dick Taylor, 16:04
- 1971 TR6, douglas hounsell, 13:33
- Fwd: Buckeye Triumphs IS down..., Vsnively, 13:03
- Re: Chrome vs. painted wire wheels, Timothy Holbrook, 11:13
- Looking for an old friend..., Mark Anderton, 10:38
- Re: Buckeye Triumphs IS down..., YeOldEd, 10:26
- Re: Buckeye Triumphs IS down..., Andrew H. Litkowiak, 10:11
- Buckeye Triumphs IS down..., Bruce Miles, 09:51
- Headlight Rocker Switch Backing Plate Needed, Bob Fabie, 07:55
June 13, 2003
- Triumphs on film, StangGuy67, 23:16
- Steering wheel Hub for TR6/MGA same?, Todd Bermudez, 18:12
- RE: Need help with TR6 S. number, Peter Zaborski, 17:19
- Re: OT Triumph Art in trade for education, Brian T., 17:17
- OT Triumph Art in trade for education, steve bridge, 15:11
- Re: Transmission Seal Question, Mark Anderton, 15:02
- RE: Buckeye Triumphs Down???, 2nd installment, Stephen Hanselman, 13:51
- RE: Buckeye Triumphs Down???, Stephen Hanselman, 13:41
- TR6 engine stutter, Woollcotts, 13:30
- Need help with TR6 S. number, Dennis N Culligan, 12:15
- spring pan body brackets, RANDALL T & SUSAN NEVIS, 10:59
- Re: Buckeye Triumphs Down???, Mark Bullard, 10:30
- Re: Buckeye Triumphs Down???, Tommy Thompson, 08:11
- Re: Buckeye Triumphs Down???, Robert M. Lang, 07:53
- Buckeye Triumphs Down???, Don Malling, 07:32
- Re: Chrome vs. painted wire wheels, Robert M. Lang, 07:15
- Re: Chrome vs. painted wire wheels, Todd Bermudez, 06:30
- RE: Roller Rockers - Where's Jim Swarthout gone?, Mike Munson, 03:04
June 12, 2003
- RE: Roller Rockers - Where's Jim Swarthout gone?, Andrew Packard, 23:44
- Roller Rockers - Where's Jim Swarthout gone?, Glen Johnson, 23:36
- re: LBC costs and a "hot" car, Chuck Arnold, 21:27
- Re: Chrome vs. painted wire wheels, Richard Seaton, 20:26
- Re: Chrome vs. painted wire wheels, Don Malling, 19:18
- Re: shock refill, Don Malling, 19:16
- Rockwell Hardness Testing -- Cams and Lifters, Don Malling, 19:15
- Re: Chrome vs. painted wire wheels, Gregory Dito, 16:36
- Re: Chrome vs. painted wire wheels, GSFuqua1, 16:04
- Exhaust Valve Spring Collar, Ken Owens, 15:34
- RE: Need help with TR6 S. number, Eric Conrad, 14:17
- Enough is enough!, Robert L. Gannon, 14:12
- Re: Tonneau strap (was Re: seat height), Peter Macholdt, 13:54
- Re: Chrome vs. painted wire wheels, John Mitchell, 13:15
- Re: Tonneau strap (was Re: seat height), Robert M. Lang, 13:10
- Tonneau strap (was Re: seat height), Dennis N Culligan, 12:58
- Need help with TR6 S. number, Jeff M, 12:47
- RE: Body Alignment Shims, Andrew Packard, 11:32
- Re: Chrome vs. painted wire wheels, Kai M. Radicke, 11:05
- Re: Rear shocks "refill", Mitchel Seff, 09:48
- Body Alignment Shims, Cliff Davies, 09:39
- Re: [xj] Upcoming NorCal British Car Show and Swap Meet-June, Ken Davis, 08:50
- Re: Chrome vs. painted wire wheels, Robert M. Lang, 08:42
- RE: Rear shocks "refill", hart, 08:42
- RE: Rear shocks "refill", Stephen Hanselman, 08:38
- Re: Exhaust options continued..., Robert M. Lang, 08:32
- Re: Exhaust options continued..., Seth Glassman, 08:26
- RE: Rear shocks "refill", Robert M. Lang, 08:11
- Re: Chrome vs. painted wire wheels, william mcintire, 07:26
- Re: Chrome vs. painted wire wheels, Lizirbydavis, 07:23
- Re: Chrome vs. painted wire wheels, Todd Bermudez, 07:16
- Re: Chrome vs. painted wire wheels, Todd Bermudez, 07:11
- Booster striped vacuum hose, Dave Mahlmeister, 07:09
- Re: Chrome vs. painted wire wheels, Kai M. Radicke, 07:00
- Shock Absorber Discussion, michael lunsford, 06:48
- Re: Chrome vs. painted wire wheels, Richard Seaton, 06:33
- Re: Chrome vs. painted wire wheels, Don Malling, 06:16
- Re: shock refill, Irv Korey, 04:58
- RE: TR6 Running Rich - Update, Sally or Dick Taylor, 00:24
June 11, 2003
- gear reduction starter, Gary Fluke, 22:58
- Re: shock refill, John Turbeville, 22:48
- Re: Chrome vs. painted wire wheels, Kai M. Radicke, 22:40
- Re: Chrome vs. painted wire wheels, Gary Fluke, 22:04
- Re: seat height, Gary Fluke, 22:02
- Body supports spring pan TR250, RANDALL T & SUSAN NEVIS, 22:01
- Re: Chrome vs. painted wire wheels, Don Malling, 21:29
- seat height, Lizirbydavis, 21:22
- Chrome vs. painted wire wheels, Lizirbydavis, 21:17
- RE: Exhaust options continued..., Mark Hooper, 21:04
- Re: Exhaust options continued..., Alan, 20:38
- Rear shock oil, TR6 Triumph, 20:25
- Re: Exhaust options continued..., Mark Bullard, 20:23
- RE: Rear shocks "refill", Mark Hooper, 20:22
- Re: brush nonsense, Gary Fluke, 20:04
- RE: TR6 Running Rich - Update, Steve Hanselman, 20:01
- RE: Rear shocks "refill", Steve Hanselman, 20:01
- Re: Exhaust options continued..., Lizirbydavis, 18:58
- Re: Rear shocks "refill", Doug Hofer, 18:07
- Re: Rear shocks "refill", Gregory Dito, 17:53
- RE: Rear shocks "refill", Sally or Dick Taylor, 17:52
- Re: TR6 engine stutter, Walter Fogle, 17:02
- RE: Rear shocks "refill", Mark Hooper, 16:01
- Re: TR6 Running Rich - Update, Chip19474, 15:51
- Re: Rear shocks "refill", Bill Elliott, 15:44
- TR6 engine stutter, Woollcotts, 15:31
- Rear shocks "refill", Bert Van der Stee, 13:54
- GL 4 or 5, YeOldEd, 12:53
- Re: TR6 Running Rich - Update, Sally or Dick Taylor, 12:34
- Gravity, Richard Cottingham, 12:26
- Re: GL 4 or 5, Sally or Dick Taylor, 12:12
- Re: GL 4 or 5, Richard Cottingham, 11:59
- Exhaust options continued..., Creamer, Mark, 11:36
- GL 4 or 5, YeOldEd, 11:18
- Re: SU convertion for TR6 ?, Robert M. Lang, 07:34
- Re: LOUD Exhaust, Chuck Arnold, 07:29
- RE: SU conversion for TR6, JASandPJS, 06:47
- Re: TR6 Running Rich - Update, Gary Fluke, 01:15
- Re: brush nonsense, Gary Fluke, 00:51
June 10, 2003
- RE:, Rick, 23:26
- Re: TR6 Running Rich - Update, TR6 Triumph, 23:12
- Re: LOUD Exhaust, Seth Glassman, 20:58
- Re: Re: TR6 Distributor, mitch vamos, 20:44
- Re: (no subject), Timothy Holbrook, 19:36
- Re: LOUD Exhaust, Robert L. Gannon, 18:24
- membership, paulzimm, 18:20
- Re: (no subject), Cris Hemingway, 17:08
- Re: SU convertion for TR6 ?, Alex Cherington, 15:55
- Re: (no subject), Cris Hemingway, 15:04
- Re: Gauges, Dwayne Cooper, 14:34
- Re: Gauges, James Tabor, 13:23
- Re: (no subject), Sally or Dick Taylor, 12:48
- TR6 Distributor, Sally or Dick Taylor, 12:31
- coils, Walt Philipson, 11:39
- Re: TR6 Distributor, Walt Philipson, 11:33
- (no subject), RazorBobSr, 10:52
- Re: TR6 Running Rich - Update, Chip19474, 10:36
- Re: Luggage Rack, RangerCRS, 09:02
- Re: Luggage Rack, Todd Bermudez, 08:27
- Vacume advance problem ?, Pat Leask, 08:13
- Luggage Rack, Mike Keenan, 08:08
- RE: LOUD Exhaust, Robert M. Lang, 07:32
- Re: trans oil #2, Richard Seaton, 06:23
- RE: LOUD Exhaust, Tarnow, Joshua, 06:23
- Re: LOUD Exhaust, Mike Keenan, 05:58
- Re: trans oil #2, Doug Hofer, 04:49
June 09, 2003
- RE: Squealing throw-out bearings, Sally or Dick Taylor, 23:48
- Re: Re: TR6 Distributor, Sally or Dick Taylor, 23:16
- Re: TR250 brake MC disassembly, Trumpet76TR6, 22:34
- Shock absorber choices, Tom Wilkinson, 22:04
- Re: trans oil, Gary Fluke, 22:02
- LOUD Exhaust, Seth Glassman, 21:57
- Re: SU convertion for TR6 ?, Gary Fluke, 21:54
- Re: TR6 Running Rich - New Motor Rebuild, Gary Fluke, 21:47
- door gap / alignment, Keith Meinhold, 21:20
- RE: door gap / alignment, Andrew Packard, 20:19
- trans oil #2, SamuelsMA, 20:15
- trans oil, SamuelsMA, 19:54
- Excessive heat coming up, Dennis Sokol, 19:35
- Re: Re: TR6 Distributor, tr6greg, 19:22
- SU convertion for TR6 ?, Pat Leask, 19:02
- Re: TR250 brake MC disassembly, Don Malling, 18:40
- RE: Squealing throw-out bearings, Lizirbydavis, 18:36
- Re: TR6 Running Rich - New Motor Rebuild, Chip19474, 17:44
- Re: green/black wire under dash, Kendall Larsen, 15:41
- TR6 Flags on Quarter Panels, ShewFamily, 14:45
- Painting on original paint., Scott Mann, 13:01
- Re: Gunst and Bent Fingers, Todd Bermudez, 12:42
- Re: TR6 Flags on Quarter Panels, Gary Fluke, 12:31
- Re: TR250 brake MC disassembly, William Maslin, 12:28
- Re: Ignition timing and the tem sensing switch, Sally or Dick Taylor, 12:27
- RE: Horn Repair, Andrew Packard, 12:25
- Re: TR6 Flags on Quarter Panels, Sally or Dick Taylor, 12:08
- Gunst and Bent Fingers, Sally or Dick Taylor, 11:59
- Transmission Seal Question, Acekraut11, 11:52
- green/black wire under dash, Mark Bullard, 11:50
- Horn Repair, Acekraut11, 11:49
- RE: TR250 brake MC disassembly, Robert M. Lang, 11:21
- RE: TR250 brake MC disassembly, Creamer, Mark, 10:39
- RE: TR250 brake MC disassembly, Creamer, Mark, 10:34
- Re: TR250 brake MC disassembly, William Maslin, 10:22
- RE: Re: TR6 Distributor, Lumia, John, 10:20
- Re: TR6 Flags on Quarter Panels, Jeff M, 10:11
- Ignition timing and the tem sensing switch, Stephen Hanselman, 10:07
- RE: ground wires, Stephen Hanselman, 10:07
- Re: TR6 Distributor, Lumia, John, 09:59
- Re: brush nonsense, JEFFREY FETNER, 09:26
- TR6 Flags on Quarter Panels, ShewFamily, 09:12
- Distributor, Seth Glassman, 08:06
- Re: TR6 Distributor, Robert M. Lang, 07:59
- Seeking fuel line Compression 1/4 sleeve, cm.sherman, 06:17
- Re: TR250 brake MC disassembly, Acekraut11, 05:55
- A gentle reminder, jonmac, 05:41
- TR250 brake MC disassembly, Don Malling, 05:37
- Re: ground wires, Mickylong, 05:12
- TR250 TR6 Gunst Clutch T/O bearing, Don Malling, 04:22
- Re: brush nonsense, Gary Fluke, 01:29
June 08, 2003
- Re: TR6 Distributor, Btp44, 23:34
- Re: TR6 Distributor, Gregory Dito, 22:30
- RE: TR6 Distributor, Stephen Hanselman, 22:00
- RE: Too Tall Springs, Stephen Hanselman, 22:00
- Re: TR6 Distributor, Cris Hemingway, 21:15
- RE: TR6 Distributor, Hugh Barber, 20:50
- Re: TR6 Distributor, Gregory Dito, 19:33
- RE: TR6 Distributor, Hugh Barber, 18:15
- TR6 Distributor, Seth Glassman, 17:56
- RE: Ground wires, Andrew Packard, 13:38
- Ground wires, Mickylong, 13:32
- Re: TR6 Running Rich - New Motor Rebuild, Terry Geiger, 11:07
- Standard Triumph Radio to FM, Don Malling, 10:11
- Re: TR6 Running Rich - New Motor Rebuild, Josh Tarnow, 06:54
- Re: Warning to Ebay sellers, Bob Fabie, 06:52
- Wrong size studs on wheel hub of TR250, Bruce Moxon, 05:29
- Re: brush nonsense, JEFFREY FETNER, 03:05
June 07, 2003
- Re: TR6 Running Rich - New Motor Rebuild, Irv Korey, 23:09
- Re: Warning to Ebay Sellers, Tommy Thompson, 21:24
- Re: TR6 Running Rich - New Motor Rebuild, TR6 Triumph, 17:23
- TR6 Running Rich - New Motor Rebuild, Chip19474, 15:37
- Rooms for TRF, Dale, 14:19
- RE: Torgue setting, Jim Davis, 10:38
- Torgue setting, Ken Owens, 05:18
- brush nonsense, Gary Fluke, 00:30
June 06, 2003
- Brush replacement, Gary Fluke, 16:20
- hazard switch conclusion, Andrew Packard, 14:45
- Re: hazard switch question about originality., Gregory Dito, 14:25
- Re: hazard switch question about originality., Richard Seaton, 13:15
- Re: Replacements for TRF "Too Tall" Springs?, Richard Seaton, 12:40
- Too Tall Springs, michael lunsford, 12:15
- Re: Ujoint grease zerks, Sally or Dick Taylor, 11:30
- Re: Ujoint grease zerks, Jadewey211, 11:19
- Re: Ujoint grease zerks, Btp44, 11:16
- RE: Running Cool, Pappin,Ian, 10:40
- RE: Running Cool, Robert M. Lang, 10:01
- Re: Ujoint grease zerks, Theodore R. Stevens, 09:54
- Re: Ujoint grease zerks, Robert M. Lang, 09:52
- Ujoint grease zerks, Cliff Davies, 09:46
- RE: Replacements for TRF "Too Tall" Springs?, R. Ashford Little II, 09:22
- Re: Replacements for TRF "Too Tall" Springs?, Terry Geiger, 09:10
- Re: hazard switch question about originality., Walter Fogle, 08:45
- RE: Running Cool, Stephen Hanselman, 08:14
- Re: gear lube, Robert M. Lang, 07:45
- hazard switch question about originality., Andrew Packard, 07:16
- RE: Running Cool, Creamer, Mark, 07:00
- Re: Running Cool, Robert L. Gannon, 05:25
- Re: Running Cool, TR6 Triumph, 01:22
June 05, 2003
- Re: seeking air horn recommendation, Gary Fluke, 23:46
- Re: Running Cool, Mark Bullard, 22:01
- RE: Running Cool, Mark Creamer, 21:16
- Re: Replacements for TRF "Too Tall" Springs?, Gene Garrison, 20:53
- RE: seeking air horn recommendation, Keith Meinhold, 19:54
- One more listing of parts for sale., Joe18d, 17:54
- Re: gear lube, Sally or Dick Taylor, 17:30
- Re: Running Cool, Sally or Dick Taylor, 17:04
- Re: Running Cool, Larry Alt, 15:23
- RE: seeking air horn recommendation, Creamer, Mark, 14:59
- RE: seeking air horn recommendation, andylit@covad.net, 14:59
- seeking air horn recommendation, Cregg Cowan, 14:52
- Running Cool, Creamer, Mark, 13:49
- RE: Replacements for TRF "Too Tall" Springs?, Keith Meinhold, 12:20
- Password thief, YeOldEd, 11:34
- Re: Correctly Incorrect TR250 convertible top, Todd Bermudez, 10:58
- Re: Correctly Incorrect TR250 convertible top, TR250Driver, 10:32
- RE: (no subject) and some other thing that are non-LBC, Stephen Hanselman, 08:23
- Replacements for TRF "Too Tall" Springs?, William Maslin, 07:20
- Re: Correctly Incorrect TR250 convertible top, Don Malling, 06:30
- Re: Running Cool, JEFFREY FETNER, 01:16
June 04, 2003
- Gear lube, Gary Fluke, 22:45
- Diff seals, RazorBobSr, 20:22
- RE: Correctly Incorrect TR250 convertible top, Andrew Packard, 19:44
- Re: (no subject), Daniel Julien, 19:39
- Correctly Incorrect TR250 convertible top, Don Malling, 19:16
- Re: Rattling Rear Six, TR250Driver, 18:21
- Re: Diff Seal, Gregory Dito, 18:11
- RE: (no subject), Andrew Packard, 18:06
- (no subject), RazorBobSr, 17:20
- Re: Gear Lube 2, jay_welch, 10:46
- Re: I'll second the thanks to all, Lizirbydavis, 10:36
- Gear Lube 2, ShewFamily, 09:25
- Re: gear lube, Lumia, John, 08:44
- Re: gear lube, jay_welch, 08:43
- RE: gear lube, Stephen Hanselman, 08:00
- RE: gear lube, Creamer, Mark, 07:53
- Re: gear lube, Peter Macholdt, 07:44
June 03, 2003
- gear lube, Gary Fluke, 23:55
- Alternator Conversion, Seth Glassman, 21:56
- RE: Bosch Alternator conversion, Hugh Barber, 21:14
- Re: Rattling Rear Six, Sally or Dick Taylor, 19:35
- RE: Bosch Alternator conversion, Andrew Packard, 19:15
- Re: PD WA Leak, Mark Anderton, 18:35
- I'll second the thanks to all, mocharand5, 18:18
- Re: Rattling Rear Six, TR250Driver, 17:58
- Need a TR6 short block, Chuck Arnold, 17:27
- Re: Bosch Alternator conversion, David Friedlander, 17:26
- Re: Rattling Rear Six, Sally or Dick Taylor, 16:57
- RE: Replacing dashboard, Stephen Hanselman, 14:28
- Upgraded Camshaft vs. Roller Rockers?, Simms, Bruce CIC, 13:51
- Replacing dashboard, Mike Keenan, 11:26
- Re: Gauges, Dwayne Cooper, 11:24
- RE: Dismantling a tachometer, Andrew Packard, 10:22
- Re: Dismantling a tachometer, Mickylong, 10:11
- RE: Bosch Alternator conversion, Andrew Packard, 10:02
- BL Badge location, Cliff Davies, 09:15
- Re: 1975 TR6 ... Once was., Lumia, John, 08:23
- Fw: Bosch Alternator conversion, Seth Glassman, 06:35
- Bosch Alternator conversion, ShewFamily, 06:23
- Gauges, john davis, 06:03
- Fw: Bosch Alternator conversion, Seth Glassman, 04:53
- Bosch Alternator conversion, Seth Glassman, 04:51
June 02, 2003
- VOTE for TRIUMPH, Trumpet76TR6, 22:43
- Re: Lowering Rear Differential, Robert L. Gannon, 21:49
- Re: Rattling Rear Six, Btp44, 21:28
- RE: Lowering Rear Differential, Mike Munson, 20:54
- Re: Cam Lubrication - My correction, Sally or Dick Taylor, 20:27
- Rattling Rear Six, TR250Driver, 20:22
- Re: PD WA Leak, Mark Riddle, 19:53
- Cam Lubrication - My correction, Gregory Dito, 19:29
- Re: Lowering Rear Differential, Gregory Dito, 19:08
- Re: Differential Mount Bolts, Gregory Dito, 19:04
- Re: Dismantling a tachometer, JEFFREY FETNER, 18:50
- Rear hub rebuild, TR6me, 18:50
- Lowering Rear Differential, mocharand5, 17:57
- Dismantling a tachometer, Walter Fogle, 17:43
- Differential Mount Bolts, Acekraut11, 15:44
- Re: steering lubrication, Cregg Cowan, 14:28
- PDWA Leak, Bob Rothstein, 12:13
- RE: soft top latches, Neil Beesley, 11:15
- RE: PDWA Leak, Navarrette, Vance, 08:42
- TRF Summer Party- Hotel, Dennis N Culligan, 07:50
- GAS GAS and more GAS, Tarnow, Joshua, 06:17
- Re: soft top latches, Gregory Dito, 05:45
- RE: transmission oil, Tarnow, Joshua, 05:21
- soft top latches, Dennis Sokol, 04:45
- Re: Dismantling a tachometer, JEFFREY FETNER, 02:51
- Re: Lube oils for G/B and Trans., Sally or Dick Taylor, 01:14
- Re: Guntz bearing- Opinons please, Sally or Dick Taylor, 00:23
- Lube oils for G/B and Trans., Gary Fluke, 00:14
June 01, 2003
- Guntz bearing- Opinons please, Pat Leask, 22:10
- Re: What T/O bearing for TR6 ?, Don Malling, 22:02
- Re: What T/O bearing for TR6 ?, Todd Bermudez, 21:33
- Re: transmission oil, Peter Macholdt, 21:23
- RE: transmission oil, Mark Creamer, 20:55
- transmission oil, SamuelsMA, 20:45
- What T/O bearing for TR6 ?, Pat Leask, 20:35
- RE: Bleeding Brakes And PDWA, Hugh Fader, 19:29
- Re: gas filler cap plug, Gregory Dito, 19:28
- bolt sizes, john davis, 19:16
- Re: Bleeding Brakes And PDWA, Mark Anderton, 18:54
- Re: PDWA Leak, Mark Anderton, 18:48
- Re: Bleeding Brakes And PDWA, Alan, 18:03
- Re: Bleeding Brakes And PDWA, Acekraut11, 17:56
- Bleeding Brakes And PDWA, Bill Moine, 17:30
- RE: PDWA Leak, Acekraut11, 17:18
- Re: gas filler cap plug, Kevin Andrews, 16:26
- RE: PDWA Leak, Creamer, Mark, 16:24
- PDWA Leak, Acekraut11, 16:17
- Rear transmission seal - fixed!, Jay Snable, 15:57
- Re: Valve Guide seals, Mitchel Seff, 15:38
- 1975 TR6 ... Once was., Graham McMicken, 14:52
- Dyno2000 engine software, Josh Tarnow, 14:21
- Noise under braking Problem solved, Bert Van der Stee, 14:07
- TRF Summer Party- Hotel, SOThornton, 11:51
- Re: gauges, Mickylong, 10:40
- A few parts remain!, Joe18d, 09:31
- Re: gauges, Gregory Dito, 09:13
- Re: gas filler cap plug, Gregory Dito, 08:52
- Re: Accelerator shaft bushings, Don Malling, 08:36
- Re: gauges, Don Malling, 08:33
- Re Virus --- Amish Virus, Bill Moine, 08:25
- RE: Accelerator shaft bushings, Neil Wehmeyer, 07:34
- RE: gauges, Neil Wehmeyer, 07:34
- RE: I found a cheap MGA, Gene Holtzclaw, 07:00
- Re: gas filler cap plug, Don Malling, 06:38
- Re: transmission oil, JEFFREY FETNER, 06:01
- Re: steering lubrication, Sally or Dick Taylor, 00:13