Motolita Steering Wheel Hub, Frank Clarici, 1997/12/31

• Re: Motolita Steering Wheel Hub, Ulix Goettsch, 1997/12/31

Whitworths, Ron Soave, 1997/12/31

• Re: Whitworths, Rick / Carolyn Walters, 1997/12/31

Hello and help, Wraith6214, 1997/12/31

• Hello and help, Guy Weller, 1997/12/31

Spec Sprite Proposal, Rich.A.Wagner, 1997/12/31

• Re: Spec Sprite Proposal, Wm. Severin Thompson, 1997/12/31

WERACE (but won't sell anything...), Ulix Goettsch, 1997/12/30

• Re: WERACE (but won't sell anything...), Christopher Palmer, 1997/12/30
• Re: WERACE (but won't sell anything...), Ulix Goettsch, 1997/12/30

Engine Reconditioning, Guy Weller, 1997/12/30

• Re: Engine Reconditioning, Frank Clarici, 1997/12/30
• Re: Engine Reconditioning, Daryl May, 1997/12/30
• Re: Engine Reconditioning, Daryl May, 1997/12/30
• Re: Engine Reconditioning, Les Myer, 1997/12/30
• Re: Engine Reconditioning, Les Myer, 1997/12/30
• Re: Engine Reconditioning, Brian Evans, 1997/12/31
• Re: Engine Reconditioning, Rick / Carolyn Walters, 1997/12/31

Re: Silicon switch-over DON'T DO IT!!!, Christopher Palmer, 1997/12/29

• RE: Silicon switch-over DON'T DO IT!!!, Chris Kotting, 1997/12/30
• RE: Silicon switch-over DON'T DO IT!!!, Christopher Palmer, 1997/12/30
• Re: Silicon switch-over DON'T DO IT!!!, Heather & Joe Way, 1997/12/30
• Re: Silicon switch-over DON'T DO IT!!!, Christopher Palmer, 1997/12/30
• Re: Silicon switch-over DON'T DO IT!!!, Ulix Goettsch, 1997/12/30
• RE: Silicon switch-over DON'T DO IT!!!, Chris Kotting, 1997/12/30
• Re: Silicon switch-over DON'T DO IT!!!, Ron Soave, 1997/12/30
• Re: Silicon switch-over DON'T DO IT!!!, Christopher Palmer, 1997/12/30
• RE: Silicon switch-over DON'T DO IT!!!, Chris Kotting, 1997/12/31
• RE: Silicon switch-over DON'T DO IT!!!, Brian Evans, 1997/12/31

Silicon switch-over, James D Rowan, 1997/12/29

• RE: Silicon switch-over, Chris Kotting, 1997/12/29
• Re: Silicon switch-over, Frank Clarici, 1997/12/29

Pilot Bushing, Larry and Sandi Miller, 1997/12/29

• Re: Pilot Bushing, Chuck Ciaffone, 1997/12/29
• Re: Pilot Bushing, Heather & Joe Way, 1997/12/29
• Re: Pilot Bushing, Ulix Goettsch, 1997/12/29

clutch question, Evangelos G. Makris, 1997/12/29

• Re: clutch question, Mike Gigante, 1997/12/29
• RE: clutch question, Dave Formstone, 1997/12/29

K&N filters, stock cannisters, Jeff Boatright, 1997/12/28

• Re: K&N filters, stock cannisters, Ulix Goettsch, 1997/12/29
• Re: K&N filters, stock cannisters, Rich.A.Wagner, 1997/12/29

Valvoline MTL, etc, Chuck Ciaffone, 1997/12/28

• Re: Valvoline MTL, etc, Ulix Goettsch, 1997/12/29
• Re: Valvoline MTL, etc, Carl E Elliott, 1997/12/29

62 Midget update, Valentine, 1997/12/28

• Re: 62 Midget update, Fred Krampits, 1997/12/29

Re: Midget Clutch Slave problem..., Richard D. Arnold, 1997/12/27

• Re: Midget Clutch Slave problem..., Ulix Goettsch, 1997/12/27

LBC wire?, Christopher T Palmer, 1997/12/26

• Re: LBC wire?, Rick / Carolyn Walters, 1997/12/27
• Re: LBC wire?, Larry and Sandi Miller, 1997/12/27

Santa's Exhaust System and a dumb question!, Mark Endicott, 1997/12/26

• Re: Santa's Exhaust System and a dumb question!, Chris Nevard, 1997/12/26
• Re: Santa's Exhaust System and a dumb question!, Nory, 1997/12/27
• Re: Santa's Exhaust System and a dumb question!, Ulix Goettsch, 1997/12/27

Valvoline Synthetic gearlube ?, Chuck Ciaffone, 1997/12/26

• Re: Valvoline Synthetic gearlube ?, Jay Quinn, 1997/12/26
• Re: Valvoline Synthetic gearlube ?, Ron Soave, 1997/12/26

Throttle pedal, Dave Woerpel, 1997/12/26

• Re: Throttle pedal, Rick / Carolyn Walters, 1997/12/26
• Re: Throttle pedal, Larry and Sandi Miller, 1997/12/26
• Re: Throttle pedal, Billy Zoom, 1997/12/26
• Re: Throttle pedal, Christopher T Palmer, 1997/12/26
• Re: Throttle pedal, Leo Speichinger, 1997/12/26
• throttle pedal, Leo Speichinger, 1997/12/26
• Re: Throttle pedal, b-evans, 1997/12/26
• Re: Throttle pedal, P Van Wig, 1997/12/27
• Throttle Pedal, Larry and Sandi Miller, 1997/12/27

Compressors, Phil Vanner, 1997/12/26

• Re: Compressors, Frank Clarici, 1997/12/26
• Re: Compressors, Nory, 1997/12/27

Merry Christmas, Patton Dickson, 1997/12/24

• Merry Christmas, Frank Clarici, 1997/12/24

Cut The Tunnel?, Chuck Ciaffone, 1997/12/24

• Re: Cut The Tunnel?, Brian Evans, 1997/12/24
• Re: Cut The Tunnel?, alan b fisher, 1997/12/24
• Re: Cut The Tunnel?, Wm. Severin Thompson, 1997/12/24
• Re: Cut The Tunnel?, b-evans, 1997/12/24
• Re: Cut The Tunnel?, Steve Byers, 1997/12/24
• Re: Cut The Tunnel?, Steve Byers, 1997/12/24
• Re: Cut The Tunnel?, Ron Soave, 1997/12/26

Warning!, Larry and Sandi Miller, 1997/12/23

• Re: Warning!, Ulix Goettsch, 1997/12/27
• Re: Warning!, Larry and Sandi Miller, 1997/12/27

How do I get that switch out, Christopher Palmer, 1997/12/23

• Re: How do I get that switch out, Rick / Carolyn Walters, 1997/12/23
• Re: How do I get that switch out, Christopher Palmer, 1997/12/23

Pushrods, Larry and Sandi Miller, 1997/12/23

• Re: Pushrods, Steve Byers, 1997/12/23

PDLJMPR, Les Myer, 1997/12/22

• PDLJMPR, Les Myer, 1997/12/23

Speedbleeders, James D Rowan, 1997/12/22

• Re: Speedbleeders, Editors, Molecular Vision, 1997/12/22
• Re: Speedbleeders, Jaral48462, 1997/12/22
• Re: Speedbleeders, Steve Byers, 1997/12/22
• Re: Speedbleeders, Frank Clarici, 1997/12/22
• speedbleeders, Shawn J. Tobin, 1997/12/23
• Re: Speedbleeders, James D Rowan, 1997/12/23
• Re: Speedbleeders, Larry and Sandi Miller, 1997/12/23
• Re: Speedbleeders, Frank Clarici, 1997/12/23

"centre lock alloy wheels" which are 13" X 5", Shawn J. Tobin, 1997/12/22

• Re: "centre lock alloy wheels" which are 13" X 5", Evangelos G. Makris, 1997/12/23

Antennas and car covers, Steve Byers, 1997/12/21

• Re: Antennas and car covers, CMLove, 1997/12/22

Sprite movie sighting, Amy Turner, 1997/12/21

• Re: Sprite movie sighting, Ron Soave, 1997/12/21
• RE: Sprite movie sighting, Skip Tannen, 1997/12/21
• Re: Sprite movie sighting, Amy Turner, 1997/12/21

Re: Converting to Steel Wheels (plus Warning on half shafts), Mike Gigante, 1997/12/20

• RE: Converting to Steel Wheels (plus Warning on half shafts), Seippel, Jim J, 1997/12/22

Re: Cluster Gear, Mike Gigante, 1997/12/20

• Re: Cluster Gear, Capt PfB, 1997/12/20
• RE: Cluster Gear, Dave Formstone, 1997/12/21

brake fluid, Robert, 1997/12/19

• Re: brake fluid, Matt Liggett, 1997/12/19

Knock-on "minilites", Shawn J. Tobin, 1997/12/19

• Re: Knock-on "minilites", Larry and Sandi Miller, 1997/12/19
• Re: Knock-on "minilites", Shawn J. Tobin, 1997/12/19
• Re: Knock-on "minilites", Evangelos G. Makris, 1997/12/20

Extra Studs from my 1275 !, Chuck Ciaffone, 1997/12/19

• RE: Extra Studs from my 1275 !, Dave Formstone, 1997/12/19

Re:Bought it! -Now what?, FrogEye56, 1997/12/19

• Re: Bought it! -Now what?, Matt Liggett, 1997/12/19
• Re:Bought it! -Now what?, jphender, 1997/12/19
• Re: Re:Bought it! -Now what?, Ron Soave, 1997/12/19
• Re:Bought it! -Now what?, Christopher Palmer, 1997/12/19
• Re: Bought it! -Now what?, Daniel Thompson, 1997/12/19
• Re: Bought it! -Now what?, Rick / Carolyn Walters, 1997/12/19
• Re: Bought it! -Now what?, GMari58175, 1997/12/20

Re:Bought it! Now what?, FrogEye56, 1997/12/19

• RE: Re:Bought it! Now what?, Nolan, Michael F., 1997/12/19

Converting to Steel Wheels, Evangelos G. Makris, 1997/12/19

• Re: Converting to Steel Wheels, Patton Dickson, 1997/12/19
• Re: Converting to Steel Wheels, John Colosimo, 1997/12/19
• Re: Converting to Steel Wheels, Wm. Severin Thompson, 1997/12/19
• Re: Converting to Steel Wheels, Patton Dickson, 1997/12/19
• Re: Converting to Steel Wheels, Larry and Sandi Miller, 1997/12/19
• Re: Converting to Steel Wheels, Gregory Kirk, 1997/12/19
• Re: Converting to Steel Wheels, Patton Dickson, 1997/12/19
• Re: Converting to Steel Wheels, Matt Liggett, 1997/12/19
• Re: Converting to Steel Wheels, Frank Clarici, 1997/12/19
• Re: Converting to Steel Wheels, Rick / Carolyn Walters, 1997/12/19
• Re: Converting to Steel Wheels, Mike Gigante, 1997/12/20

Gasket Sealers?, Chas Douglass, 1997/12/18

• Re: Gasket Sealers?, Chuck Ciaffone, 1997/12/19

Outer fulcrum pin removal, Steve Obert, 1997/12/18

• Re: Outer fulcrum pin removal, Frank Clarici, 1997/12/18
• Re: Outer fulcrum pin removal, Steve Byers, 1997/12/18
• Re: Outer fulcrum pin removal, Chris Kotting, 1997/12/18
• Re: Outer fulcrum pin removal, Larry Macy, 1997/12/19
• RE: Outer fulcrum pin removal, Dave Formstone, 1997/12/19

Bondo, radibob, 1997/12/18

• Re: Bondo, Trevor Boicey, 1997/12/18
• Re: Bondo, Mike Ellsworth, 1997/12/19
• Re: Bondo, Larry and Sandi Miller, 1997/12/19

chassis plate, Evangelos G. Makris, 1997/12/18

• Re: chassis plate, Ulix Goettsch, 1997/12/18

Use it or lose it, Ron Soave, 1997/12/17

• Re: Use it or lose it, George Procyshyn, 1997/12/17
• Re: Use it or lose it, Ron Soave, 1997/12/18

All Five!, Chuck Ciaffone, 1997/12/17

• Re: All Five!, Rick / Carolyn Walters, 1997/12/17
• Re: All Five!, Ulix Goettsch, 1997/12/18

PDLJMPR IRC chat night..., Patton Dickson, 1997/12/17

• Re: PDLJMPR IRC chat night..., Larry Macy, 1997/12/18

New Team Thicko Mail list, Wm. Severin Thompson, 1997/12/17

• Re: New Team Thicko Mail list, Mark J Bradakis, 1997/12/17

Which plugs compatible with 1275, jphender, 1997/12/16

• Re: Which plugs compatible with 1275, Steve Byers, 1997/12/16
• Re: Which plugs compatible with 1275, Christopher Palmer, 1997/12/16

She Runs !, Chuck Ciaffone, 1997/12/16

• Re: She Runs !, jphender, 1997/12/16
• Re: She Runs !, Ulix Goettsch, 1997/12/16

Fuel line -- again, jphender, 1997/12/16

• Re: Fuel line -- again, Frank Clarici, 1997/12/16

Little - but interesting LBC content, JustBrits, 1997/12/15

• Re: Little - but interesting LBC content, b-evans, 1997/12/15

foiling emissions, Eric Mumford, 1997/12/15

• Re: foiling emissions, Matt Liggett, 1997/12/15
• Re: foiling emissions, b-evans, 1997/12/15
• Re: foiling emissions, Daniel Thompson, 1997/12/15
• Re: foiling emissions, b-evans, 1997/12/15

Two trivial questions:, jphender, 1997/12/15

• Re: Two trivial questions:, Frank Clarici, 1997/12/15
• RE: Two trivial questions:, Dave Formstone, 1997/12/15

Bugeye Dash, Mike Jackley, 1997/12/15

• Re: Bugeye Dash, Fred Krampits, 1997/12/15
• Re: Bugeye Dash, Larry and Sandi Miller, 1997/12/15

Distributor and wires ?, Chuck Ciaffone, 1997/12/14

• Re: Distributor and wires ?, Eric Mumford, 1997/12/14
• Re: Distributor and wires ?, mayfam, 1997/12/14
• Re: Distributor and wires ?, Frank Clarici, 1997/12/14
• Re: Distributor and wires ?, Mike Gigante, 1997/12/14
• Re: Distributor and wires ?, Brian Evans, 1997/12/15

paint question, BUG GUY 61, 1997/12/13

• Re: paint question, Mike Gigante, 1997/12/13

YOU PEOPLE ARE ALL NUTS [was: Tis the Season], Eric Mumford, 1997/12/13

• Re: YOU PEOPLE ARE ALL NUTS [was: Tis the Season], Ulix Goettsch, 1997/12/13
• Re: YOU PEOPLE ARE ALL NUTS [was: Tis the Season], Frank Clarici, 1997/12/13
• Re: YOU PEOPLE ARE ALL NUTS [was: Tis the Season], Ron Soave, 1997/12/13
• Re: YOU PEOPLE ARE ALL NUTS [was: Tis the Season], Christopher Palmer, 1997/12/15
• Re: YOU PEOPLE ARE ALL NUTS [was: Tis the Season], Matt Liggett, 1997/12/15

"Tis the Season", Frank Clarici, 1997/12/13

• Re: "Tis the Season", Ron Soave, 1997/12/13
• Re: "Tis the Season", FunE4MG, 1997/12/14

got a little life in my sprite, Craig Soich, 1997/12/13

• Re: got a little life in my sprite, Ulix Goettsch, 1997/12/13
• Re: got a little life in my sprite, Gregory Kirk, 1997/12/13

Flooded Carb, Chas Douglass, 1997/12/12

• Re: Flooded Carb, Ron Soave, 1997/12/13
• Re: Flooded Carb, Ulix Goettsch, 1997/12/13
• Re: Flooded Carb, Chas Douglass, 1997/12/13

Bugeye choke knob, Steve Hombach, 1997/12/12

• Re: Bugeye choke knob, Frank Clarici, 1997/12/12
• Re: Bugeye choke knob, b-evans, 1997/12/12
• Re: Bugeye choke knob, Pete & Caroline Phillips, 1997/12/12
• re: bugeye choke knob, Rich.A.Wagner, 1997/12/15

Expensive machining - are these prices normal?, Eric Mumford, 1997/12/12

• Re: Expensive machining - are these prices normal?, J. Adrian Barnes, 1997/12/12
• Re: Expensive machining - are these prices normal?, Frank Clarici, 1997/12/12

Upgrading Hydraulics, Phil Profili, 1997/12/12

• Re: Upgrading Hydraulics, alan b fisher, 1997/12/12
• Re: Upgrading Hydraulics, Brian Evans, 1997/12/12

Side screen felt, Jeff Church, 1997/12/11

• Re: Side screen felt, Frank Clarici, 1997/12/11

non-standard e-mail features are very irritating, Les Myer, 1997/12/11

• Re: non-standard e-mail features are very irritating, Adrian, 1997/12/11
• Re: non-standard e-mail features are very irritating, Eric Mumford, 1997/12/11
• Re: non-standard e-mail features are very irritating, Robert, 1997/12/11
• RE: non-standard e-mail features are very irritating, Chris Kotting, 1997/12/12
• Re: non-standard e-mail features are very irritating, Patton Dickson, 1997/12/12
• RE: non-standard e-mail features are very irritating, Phil Vanner, 1997/12/12
• Re: non-standard e-mail features are very irritating, Patton Dickson, 1997/12/12
• Re: non-standard e-mail features are very irritating, Patton Dickson, 1997/12/12
• Re: non-standard e-mail features are very irritating, Jeff Church, 1997/12/12
• Re: non-standard e-mail features are very irritating, Phil Vanner, 1997/12/12
• Re: non-standard e-mail features are very irritating, Phil Vanner, 1997/12/12
• Re: non-standard e-mail features are very irritating, CMLove, 1997/12/12
• Re: Re: non-standard e-mail features are very irritating, Kroyell, 1997/12/14
• Re: non-standard e-mail features are very irritating, Nory, 1997/12/16

NOS 1098 cylinder head, Frank Clarici, 1997/12/11

• Re: NOS 1098 cylinder head, Wm. Severin Thompson, 1997/12/11
• Re: NOS 1098 cylinder head, Carl E Elliott, 1997/12/12

why I moved to CA, Humor, Rick / Carolyn Walters, 1997/12/11

• Re: why I moved to CA, Humor, Ron Soave, 1997/12/11
• Re: why I moved to CA, Humor, Nory, 1997/12/11

AAARRRGGGHHH! Haynes does it again!, Chuck Ciaffone, 1997/12/11

• Re: AAARRRGGGHHH! Haynes does it again!, Dwgwater, 1997/12/11
• Re: AAARRRGGGHHH! Haynes does it again!, Chuck Ciaffone, 1997/12/11

Sealer for polished parts, James D Rowan, 1997/12/11

• Re: Sealer for polished parts, alan b fisher, 1997/12/11
• Re: Sealer for polished parts, James D Rowan, 1997/12/11
• Re: Sealer for polished parts, Larry and Sandi Miller, 1997/12/11

Speedo Cable ?, Chuck Ciaffone, 1997/12/11

• Re: Speedo Cable ?, Ulix Goettsch, 1997/12/11

Dare we hope?, b-evans, 1997/12/10

• Re: Dare we hope?, Ulix Goettsch, 1997/12/10
• Re: Dare we hope?, b-evans, 1997/12/10
• Re: Dare we hope?, Eric Mumford, 1997/12/10
• Re: Dare we hope?, Evangelos G. Makris, 1997/12/10
• Re: Dare we hope?, Ron Soave, 1997/12/11
• Re: Dare we hope?, James D Rowan, 1997/12/11
• Re: Dare we hope?, Frank Clarici, 1997/12/11
• Re: Dare we hope?, Dave Brown, 1997/12/11
• Re: Dare we hope?, James D Rowan, 1997/12/12
• Re: Dare we hope?, Rick Doig, 1997/12/12
• Re: Dare we hope?, P Van Wig, 1997/12/14
• Re: Dare we hope?, Matt Liggett, 1997/12/15
• Re: Dare we hope?, Matt Liggett, 1997/12/15

Bugeye Heater Switch, Chas Douglass, 1997/12/10

• Re: Bugeye Heater Switch, Frank Clarici, 1997/12/10
• RE: Bugeye Heater Switch, Dave Formstone, 1997/12/10
• Re: Bugeye Heater Switch, Eric Mumford, 1997/12/10
• Re: Bugeye Heater Switch, Chas Douglass, 1997/12/10
• Re: Bugeye Heater Switch, Rick / Carolyn Walters, 1997/12/10
• Re: Bugeye Heater Switch, Phil Vanner, 1997/12/11
• Re: Bugeye Heater Switch, Ulix Goettsch, 1997/12/11
• Re: Bugeye Heater Switch, Gregory Kirk, 1997/12/11
• RE: Bugeye Heater Switch, Dave Formstone, 1997/12/12

Roller throwout bearing (WARNING!!), Mike Gigante, 1997/12/10

• Re: Roller throwout bearing (WARNING!!), Bob, 1997/12/11
• Re: Roller throwout bearing (WARNING!!), Mike Gigante, 1997/12/11

Installing the Engine and Tranny, Chuck Ciaffone, 1997/12/10

• Re: Installing the Engine and Tranny, Larry and Sandi Miller, 1997/12/10
• Re: Installing the Engine and Tranny, Mike Gigante, 1997/12/10
• Re: Installing the Engine and Tranny, Ulix Goettsch, 1997/12/10

No luck for the beaters :(, Tyson Sherman, 1997/12/10

• Re: No luck for the beaters :(, Ulix Goettsch, 1997/12/10
• Re: No luck for the beaters :(, Eric Mumford, 1997/12/10

see-thru clutch line, Shawn J. Tobin, 1997/12/10

• Re: see-thru clutch line, Trevor Boicey, 1997/12/10
• Re: see-thru clutch line, Dave Brown, 1997/12/10
• Re: see-thru clutch line, Eric Mumford, 1997/12/10
• Re: see-thru clutch line, Ulix Goettsch, 1997/12/10
• Re: see-thru clutch line, Ron Soave, 1997/12/10
• See-thru clutch line, Shawn J. Tobin, 1997/12/10
• Re: see-thru clutch line, Carl E Elliott, 1997/12/10
• Re: See-thru clutch line, Ulix Goettsch, 1997/12/10
• Re: see-thru clutch line, Dave Brown, 1997/12/10
• Re: See-thru clutch line, Dave Brown, 1997/12/10

Donald's and Geoff's MkII, Editors, Molecular Vision, 1997/12/10

• Re: Donald's and Geoff's MkII, Mike Gigante, 1997/12/10
• Re: Donald's and Geoff's MkII, Phil Profili, 1997/12/10
• Donald's and Geoff's MkII, Shawn J. Tobin, 1997/12/10
• Re: Donald's and Geoff's MkII, Ulix Goettsch, 1997/12/10
• Re: Donald's and Geoff's MkII, Trevor Boicey, 1997/12/10

Halogen Headlights, Greg MAHNEY, 1997/12/10

• Re: Halogen Headlights, Chris Nevard, 1997/12/10
• Re: Halogen Headlights, Ulix Goettsch, 1997/12/10

Insurance Info...Please Read!!, ctp, 1997/12/09

• Re: Insurance Info...Please Read!!, Jay Quinn, 1997/12/10
• RE: Insurance Info...Please Read!!, Chris Kotting, 1997/12/10
• RE: Insurance Info...Please Read!!, Jay Quinn, 1997/12/10
• Re: Insurance Info...Please Read!!, Jay Quinn, 1997/12/12

RE: Rollbars, Nolan, Michael F., 1997/12/09

• Re: Rollbars, Wm. Severin Thompson, 1997/12/09

1976 pistons compatible with 1979?, Eric Mumford, 1997/12/09

• Re: 1976 pistons compatible with 1979?, J. Adrian Barnes, 1997/12/09
• Re: 1976 pistons compatible with 1979?, Larry Macy, 1997/12/09

Release Assembly, Chuck Ciaffone, 1997/12/09

• Re: Release Assembly, Ulix Goettsch, 1997/12/09

Speedometer Error, Fred Krampits, 1997/12/09

• RE: Speedometer Error, Nolan, Michael F., 1997/12/09

210 specs, Shawn J. Tobin, 1997/12/09

• Re: 210 specs, Editors, Molecular Vision, 1997/12/09

ivergate Clutch in Datsun bell housing -- which way?, Chuck Ciaffone, 1997/12/09

• Re: ivergate Clutch in Datsun bell housing -- which way?, Frank Clarici, 1997/12/09

Another distributor question, Dave Brown, 1997/12/08

• Re: Another distributor question, Trevor Boicey, 1997/12/08
• RE: Another distributor question, Chris Kotting, 1997/12/09
• RE: Another distributor question, Chris Kotting, 1997/12/09
• Re: Another distributor question, Carl E Elliott, 1997/12/10

This, my friends...., b-evans, 1997/12/08

• Re: This, my friends...., Ron Soave, 1997/12/08
• Re: This, my friends...., Jeff Church, 1997/12/08

Heater Valve thingy, Jeff Church, 1997/12/08

• Re: Heater Valve thingy, Frank Clarici, 1997/12/08
• Re: Heater Valve thingy, Jeff Church, 1997/12/08
• Re: Heater Valve thingy, Rick / Carolyn Walters, 1997/12/08

Is everyone getting this?, Frank Clarici, 1997/12/08

• Re: Is everyone getting this?, Rick / Carolyn Walters, 1997/12/08

Aftermarket seat, Ulix Goettsch, 1997/12/08

• aftermarket seat, Shawn J. Tobin, 1997/12/09
• Re: Aftermarket seat, Bob, 1997/12/09
• Re: aftermarket seat, Ulix Goettsch, 1997/12/09
• Re: aftermarket seat, J. Adrian Barnes, 1997/12/09
• Re: aftermarket seat, Ulix Goettsch, 1997/12/09
• Re: aftermarket seat, Amy Turner, 1997/12/09

Hardtop Hardware & Seals, Bob Frato, 1997/12/08

• Re: Hardtop Hardware & Seals, Frank Clarici, 1997/12/08
• Re: Hardtop Hardware & Seals, Wm. Severin Thompson, 1997/12/08
• Re: Hardtop Hardware & Seals, Mike Gigante, 1997/12/08
• Re: Hardtop Hardware & Seals, Larry and Sandi Miller, 1997/12/09
• Re: Hardtop Hardware & Seals, Ulix Goettsch, 1997/12/09

Sppedo face removal, Ron Soave, 1997/12/08

• Re: Sppedo face removal, Frank Clarici, 1997/12/08

PCV, Christopher Palmer, 1997/12/08

• Re: PCV, Ulix Goettsch, 1997/12/08

Datsun 210, Larry and Sandi Miller, 1997/12/08

• Re: Datsun 210, Frank Clarici, 1997/12/08
• Re: Datsun 210, Ulix Goettsch, 1997/12/08

collapsible steering column, Capt PfB, 1997/12/08

• collapsible steering column, Capt PfB, 1997/12/08
• Re: collapsible steering column, Capt PfB, 1997/12/08

re: "Safety Latch", b-evans, 1997/12/08

• Re: "Safety Latch", Frank Clarici, 1997/12/08

parts needed, alan b fisher, 1997/12/08

• Re: parts needed, Matt Liggett, 1997/12/08

Rotisserie, Frank R. Krajewski, 1997/12/07

• Re: Rotisserie, Lancer7676, 1997/12/07

Re: (No such thing as a) Dumb Question, Ron Soave, 1997/12/06

• Re: (No such thing as a) Dumb Question, P Van Wig, 1997/12/07

1275 cc Engine Disassembly, Daryl May, 1997/12/06

• Re: 1275 cc Engine Disassembly, Frank Clarici, 1997/12/06

Suppliers, Frank Clarici, 1997/12/06

• Re: Suppliers, Chuck Ciaffone, 1997/12/06
• Re: Suppliers, Chuck Ciaffone, 1997/12/06
• Re: Suppliers, Ron Soave, 1997/12/06
• Re: Suppliers, Rick / Carolyn Walters, 1997/12/06
• Re: Suppliers, Dave Woerpel, 1997/12/06
• Re: Suppliers, Robert, 1997/12/07

3 point belts, Ron Soave, 1997/12/05

• Re: 3 point belts, Daryl May, 1997/12/06
• Re: 3 point belts, Craig Soich, 1997/12/06
• Re: 3 point belts, Gregory Kirk, 1997/12/06
• Re: 3 point belts, Amy Turner, 1997/12/06
• Re: 3 point belts, Craig Soich, 1997/12/06
• Re: 3 point belts, Patton Dickson, 1997/12/06
• Re: 3 point belts, Ulix Goettsch, 1997/12/06
• Re: 3 point belts, Ron Soave, 1997/12/06
• Re: 3 point belts, Jeff Church, 1997/12/06
• Re: 3 point belts, Daryl May, 1997/12/07
• Re: 3 point belts, Lancer7676, 1997/12/07
• Re: 3 point belts, Daryl May, 1997/12/07
• Re: 3 point belts, Gregory Kirk, 1997/12/07
• Re: 3 point belts, Capt PfB, 1997/12/07
• Re: 3 point belts, Matt Liggett, 1997/12/11
• Re: 3 point belts, Craig Soich, 1997/12/11

New engine volume from over-boring?, mumsy, 1997/12/05

• Re: New engine volume from over-boring?, Ulix Goettsch, 1997/12/05
• Re: New engine volume from over-boring?, Eric Mumford, 1997/12/05

Midget MkIV rear brake 3/16fem-3/16fem adapter: WHERE?, mumsy, 1997/12/05

• Re: Midget MkIV rear brake 3/16fem-3/16fem adapter: WHERE?, Rick / Carolyn Walters, 1997/12/05

mini mania or rivergate, Patton Dickson, 1997/12/05

• Re: mini mania or rivergate, Ulix Goettsch, 1997/12/05

Question about serial numbers, etc., Tim Osborne, 1997/12/04

• Re: Question about serial numbers, etc., Ulix Goettsch, 1997/12/05
• Re: Question about serial numbers, etc., Ulix Goettsch, 1997/12/06

Datsun 5-Speed, Larry and Sandi Miller, 1997/12/04

• Re: Datsun 5-Speed, Ulix Goettsch, 1997/12/05
• Re: Datsun 5-Speed, Chuck Ciaffone, 1997/12/05
• Re: Datsun 5-Speed, Chuck Ciaffone, 1997/12/06
• Re: Datsun 5-Speed, Larry and Sandi Miller, 1997/12/06
• Re: Datsun 5-Speed, Ulix Goettsch, 1997/12/06
• Re: Datsun 5-Speed, P Van Wig, 1997/12/07
• Datsun 5-speed, Shawn J. Tobin, 1997/12/08
• Datsun 5-speed, Shawn J. Tobin, 1997/12/08

Distributor for 1500, Michael Dietsche, 1997/12/04

• Re: Distributor for 1500, Dave Brown, 1997/12/04
• Re: Distributor for 1500, Trevor Boicey, 1997/12/04
• RE: Distributor for 1500, Michael Dietsche, 1997/12/08
• Re: Distributor for 1500, alan b fisher, 1997/12/08
• Re: Distributor for 1500, Amy Turner, 1997/12/08

1275 Temp sender, Rick / Carolyn Walters, 1997/12/04

• Re: 1275 Temp sender, Ulix Goettsch, 1997/12/04

grille?, Dean Meyer, 1997/12/04

• Re: grille?, Rick / Carolyn Walters, 1997/12/05

PDLJMPR IRC chat night.., Patton Dickson, 1997/12/04

• Re: PDLJMPR IRC chat night.., Evangelos G. Makris, 1997/12/04
• Re: PDLJMPR IRC chat night.., Lancer7676, 1997/12/04
• Re: PDLJMPR IRC chat night.., Les Myer, 1997/12/04
• Re: PDLJMPR IRC chat night.., Ron Soave, 1997/12/05
• Re: PDLJMPR IRC chat night.., Lancer7676, 1997/12/05

Sprite Production Numbers, Trummel, 1997/12/04

• Re: Sprite Production Numbers, Nory, 1997/12/04

Fire Extiguisher Location, Greg MAHNEY, 1997/12/03

• Re: Fire Extiguisher Location, Gregory Kirk, 1997/12/04
• Re: Fire Extiguisher Location, Brian Evans, 1997/12/04

Jay Leno fondling Mrs. Brady!, mumsy, 1997/12/03

• Re: Jay Leno fondling Mrs. Brady!, Hal Rogers, 1997/12/04
• Re: Jay Leno fondling Mrs. Brady!, Nory, 1997/12/04

Motor selection, jim wright, 1997/12/03

• Re: Motor selection, Frank Clarici, 1997/12/04

Trivia, Frank Clarici, 1997/12/03

• Re: Trivia, Pete & Caroline Phillips, 1997/12/03
• Re: Trivia, Phil Profili, 1997/12/04
• Re: Trivia, transerv, 1997/12/04
• Re: Trivia, BRUCE48127, 1997/12/04
• RE: Trivia, jphender, 1997/12/05
• Re: Trivia, mumsy, 1997/12/05
• Re: Trivia, Dave Brown, 1997/12/05

Dumb Question, Larry and Sandi Miller, 1997/12/03

• Dumb Question, Jeff Church, 1997/12/06
• Re: Dumb Question, Frank Clarici, 1997/12/06
• Re: Dumb Question, Jeff Boatright, 1997/12/06
• Re: Dumb Question, Jeff Church, 1997/12/06
• Re: Dumb Question, Ron Soave, 1997/12/07
• Re: Dumb Question, Rick / Carolyn Walters, 1997/12/07
• Dumb Question, Shawn J. Tobin, 1997/12/08
• Re: Dumb Question, Larry and Sandi Miller, 1997/12/08
• Re: Dumb Question, Larry and Sandi Miller, 1997/12/08
• Re: Dumb Question, Ulix Goettsch, 1997/12/08
• Fw: Dumb Question, Jeff Church, 1997/12/08

Christmas list, Shawn J. Tobin, 1997/12/03

• Re: Christmas list, Ulix Goettsch, 1997/12/03
• Re: Christmas list, Brian Evans, 1997/12/03
• Re: Christmas list, Les Myer, 1997/12/03

Tonneau Cover, Nolan, Michael F., 1997/12/03

• Re: Tonneau Cover, Patton Dickson, 1997/12/03
• Re: Tonneau Cover, Chuck Ciaffone, 1997/12/03
• Re: Tonneau Cover, Les Myer, 1997/12/03
• Re: Tonneau Cover, Dave Brown, 1997/12/03
• Re: Tonneau Cover, PVanWig, 1997/12/04
• Tonneau cover, James D Rowan, 1997/12/22

RE: Mk IV rollbars, Craig Soich, 1997/12/03

• Re: Mk IV rollbars, Patton Dickson, 1997/12/03
• Re: Mk IV rollbars, Mike Gigante, 1997/12/03
• Re: Mk IV rollbars, Tom Shirley, 1997/12/08
• Re: Mk IV rollbars, Ulix Goettsch, 1997/12/08
• Re: Mk IV rollbars, Les Myer, 1997/12/09
• Re: Mk IV rollbars, Mike Ellsworth, 1997/12/09
• Re: Mk IV rollbars, Larry and Sandi Miller, 1997/12/09
• Re: Mk IV rollbars, Nolan, Michael F., 1997/12/09
• Re: Mk IV rollbars, alan b fisher, 1997/12/09
• RE: Mk IV rollbars, Chris Kotting, 1997/12/09
• RE: Mk IV rollbars, Nolan, Michael F., 1997/12/09
• Re: Mk IV rollbars, Dave Brown, 1997/12/09

MACHINE SHOP WORK, Daryl May, 1997/12/03

• Re: MACHINE SHOP WORK, Frank Clarici, 1997/12/03
• Re: MACHINE SHOP WORK, Les Myer, 1997/12/03

MOSS RINGS and BEARINGS, Daryl May, 1997/12/03

• Re: MOSS RINGS and BEARINGS, Les Myer, 1997/12/03

1500 boot covers - why so @#$! expensive?, mumsy, 1997/12/02

• Re: 1500 boot covers - why so @#$! expensive?, Trevor Boicey, 1997/12/02
• Re: 1500 boot covers - why so @#$! expensive?, Dave Brown, 1997/12/02

More Christmas list, Jeff Boatright, 1997/12/02

• Re: More Christmas list, mumsy, 1997/12/02
• Re: More Christmas list, Ron Soave, 1997/12/02
• Re: More Christmas list, Frank Clarici, 1997/12/02
• Re: More Christmas list, Phil Vanner, 1997/12/02
• Re: More Christmas list, Ulix Goettsch, 1997/12/03
• Re: More Christmas list, PVanWig, 1997/12/04
• Re: More Christmas list, Lancer7676, 1997/12/05
• Re: More Christmas list, Ulix Goettsch, 1997/12/05
• Re: More Christmas list, Trevor Boicey, 1997/12/05
• Re: More Christmas list, Ulix Goettsch, 1997/12/05
• Re: More Christmas list, Trevor Boicey, 1997/12/05

Austin Powers?, Craig Soich, 1997/12/02

• Re: Austin Powers?, Patton Dickson, 1997/12/02
• Re: Austin Powers?, Daniel Thompson, 1997/12/02
• Re: Austin Powers?, Mike Ellsworth, 1997/12/02
• Re: Austin Powers?, bugeye59, 1997/12/02

Re: 1500 Engine, mumsy, 1997/12/02

• Re: 1500 Engine, J. Adrian Barnes, 1997/12/02
• Re: 1500 Engine, Trevor Boicey, 1997/12/02
• Re: 1500 Engine, Phil Profili, 1997/12/02
• Re: 1500 Engine, mumsy, 1997/12/02

Wheel Cylinder, Chas Douglass, 1997/12/02

• Re: Wheel Cylinder, Heather & Joe Way, 1997/12/02
• Re: Wheel Cylinder, Chas Douglass, 1997/12/04

Side curtain bag?, James D Rowan, 1997/12/02

• Re: Side curtain bag?, Ron Soave, 1997/12/02
• Re: Side curtain bag?, Frank Clarici, 1997/12/02
• Re: Side curtain bag?, Patton Dickson, 1997/12/02

1500 Engine WAS: Re: V6 in a Midget, J. Adrian Barnes, 1997/12/02

• Re: 1500 Engine WAS: Re: V6 in a Midget, Phil Profili, 1997/12/02

Workshop Manuals, Speedo, Fuel Pump?, Greg MAHNEY, 1997/12/01

• Re: Workshop Manuals, Speedo, Fuel Pump?, Frank Clarici, 1997/12/02
• Re: Workshop Manuals, Speedo, Fuel Pump?, Mike Gigante, 1997/12/02
• Re: Workshop Manuals, Speedo, Fuel Pump?, Mike Gigante, 1997/12/03

1275 Cracked head, Tyson Sherman, 1997/12/01

• Re: 1275 Cracked head, Adrian, 1997/12/01
• Re: 1275 Cracked head, Brian Evans, 1997/12/02

V6 in a Midget, Adrian Jones, 1997/12/01

• Re: V6 in a Midget, Kevin Brown, 1997/12/01
• Re: V6 in a Midget, David Miles, 1997/12/01
• Re: V6 in a Midget, Phil Profili, 1997/12/01
• Re: V6 in a Midget, Trevor Boicey, 1997/12/01
• Re: V6 in a Midget, Mike Gigante, 1997/12/01
• Re: V6 in a Midget, Matt Liggett, 1997/12/01
• Re: V6 in a Midget, David Miles, 1997/12/01
• Re: V6 in a Midget, Phil Profili, 1997/12/02
• Re: V6 in a Midget, Nory, 1997/12/02
• Re: V6 in a Midget, Bob Segui, 1997/12/02
• Re: V6 in a Midget, Mike Ellsworth, 1997/12/02
• Re: V6 in a Midget, Mike Gigante, 1997/12/02
• Re: V6 in a Midget, Les Myer, 1997/12/03
• Re: V6 in a Midget, Kevin Brown, 1997/12/04

clutch bleeding woes, Shawn J. Tobin, 1997/12/01

• Re: clutch bleeding woes, Editors, Molecular Vision, 1997/12/01
• Re: clutch bleeding woes, Mike Gigante, 1997/12/01
• Re: clutch bleeding woes, Kroyell, 1997/12/01

Fuel Pressure Regulator Settings, Robert, 1997/12/01

• Re: Fuel Pressure Regulator Settings, alan b fisher, 1997/12/01
• Re: Fuel Pressure Regulator Settings, Dave Brown, 1997/12/01
• Re: Fuel Pressure Regulator Settings, Ron Soave, 1997/12/01
• Re: Fuel Pressure Regulator Settings, Dave Brown, 1997/12/03

re/ezibleed, Rich.A.Wagner, 1997/12/01

• Re: re/ezibleed, Editors, Molecular Vision, 1997/12/01

Re: question for the list, Craig Soich, 1997/12/01

• Re: question for the list, Patton Dickson, 1997/12/01

Re: Question for the list., Brian Evans, 1997/12/01

• RE: Question for the list., Chris Kotting, 1997/12/01
• Re: Question for the list., Frank Clarici, 1997/12/01

eezibleed, Shawn J. Tobin, 1997/12/01

• eezibleed, Adrian Jones, 1997/12/01
• Re: eezibleed, Mike Gigante, 1997/12/01
• Re: eezibleed, Kroyell, 1997/12/01
• Re: eezibleed, Brian Evans, 1997/12/02

Re: 948 Spark Plugs, GMari58175, 1997/12/01

• Re: 948 Spark Plugs, Frank Clarici, 1997/12/01