Re: Distributor and wires ?

[mayfam@sprynet.com]

Chuck:

Eric is right, but I would add that the piston comes up twice for every time it 
fires.  
So you need to select a firing stroke, which you can do by looking at the valve 
positions (see a Haynes book).

With the  number 1 piston at top dead center on a firing stroke, you can rotate 
the 
dizzy until you just see a spark at the gap, and then you have approximately 0 
degrees 
timing.  It will get you running reasonably enough t go on from there.

Daryl