You need MORE PRESSURE!!! It took a foot pump operated by hand with full
force to bleed my Rivergate cyclinder.
"Scotty, I need that pressure NOW!"
Ulix
On Tue, 16 Dec 1997, Chuck Ciaffone wrote:
> Post-rebuild Time:
>
> Just got the 72 1275 back together and static timed,
> finally. Thanks to all who suggested ways to find #1.
> Had it all the time.
>
> Just got the last wire connected, put in the oil, and kicked
> it over! By Gawd, she runs.
>
> I think the only real bug now is the clutch system. I have
> filled the master cylinder and connected the bicycle pump.
> When I pump with the bleed screw open, I get barely a trickle
> out of the bleeder. I disconnected the line from the MC doen to
> the Rivergate connector to the Datson (or whatever?) slave
> cylinder. Theres plenty fluid in the line that far. I assume
> there must be some obstruction from the connector thru the
> slave cylinder. Suggestions?
>
> chuck
> 9n
>
> b
> --
> =====================================================
>
> chuck ciaffone chuckc@ibm.net
>
Ulix __/__,__
.......................................................... (_o____o_)....
'67 Sprite
|