triumphs (date)

November 30, 2005

RE: TR3A Wheelchair type and transport, Randall, 20:15
Re: TR3A Wheelchair type and transport, acekraut11, 19:11
Re: TR3A Wheelchair type and transport, BearTranserv, 19:06
Powder Coating Question, BearTranserv, 19:02
Re: TR3A Wheelchair type and transport, ZinkZ10C, 18:57
Re: TR3A Wheelchair type and transport, JB@comcast, 17:50
Re: TR3A Wheelchair type and transport, John Mitchell, 17:20
Re: TR3A Wheelchair type and transport, Terry Smith, 15:43
Re: TR3A Wheelchair type and transport, BearTranserv, 13:03
Red TR6 in DC?, Steinman, Bill, 12:53
TR3A Wheelchair type and transport, Francis P. Gowash, 11:26
TR-4 Gas tank, GRC, 09:21
A-type O/D info, Kevin Thompson, 09:18

November 29, 2005

RE: Head bolts, Randall, 22:42
RE: Head bolts, Chris Buckley, 21:54
Re: Stuck brake drums, Randy&Val DeRuiter, 19:47
Re: Stuck brake drums, Terry Smith, 18:45
RE: cams, lifters, etc, Randall, 18:24
Re: cams, lifters, etc, Terry Smith, 18:05
RE: Stuck brake drums, John Herrera, 11:50
RE: Stuck brake drums, Randall, 11:39
Stuck brake drums, Alan Storey, 10:25
Re: Head bolts, Jack W. Drews, 08:00
Re: cams, lifters, etc, T. S. White, 07:33
good article on overdrives, Jack W. Drews, 06:49
RE: cams, lifters, etc, Randall, 06:36
Head bolts, John Mitchell, 06:36
Re: cams, lifters, etc, Hoyt, 04:58

November 28, 2005

valve clearances, Thomas Note, 23:50
Re: GT6-3 Diff Don't Drop, Jim Muller, 22:51
RE: supercharger for tr6, Mark Hooper, 22:07
Re: cams, lifters, etc, JB@comcast, 20:35
Re: cams, lifters, etc, Hoyt, 20:07
RE: supercharger for tr6, R. Ashford Little II, 20:00
cams, lifters, etc, Jack W. Drews, 19:42
RE: trf sale, Randall, 19:11
supercharger for tr6, Alan Salvatore, 19:03
trf sale, JONATHAN MOODY, 18:55
door latch pull strap, William Scherer, 18:09
Re: tr6 tachometer, Tim Hutchisen, 14:43
GT6-3 Diff Don't Drop, M. Secrest, 14:38
Re: TR-6 Air conditioner, Terry Geiger, 11:44
Re: GT6+ Seat Cushions, elliottr, 11:06
TR-6 Air conditioner, GRC, 10:42
RE: supercharger for tr6, R. Ashford Little II, 08:45
Re: Ebay Purchase List (non-lbc), Geo Hahn, 08:41
RE: supercharger for tr6, Mark Hooper, 08:23
RE: Clutch inspection plate, Randall, 08:12
RE: Ebay Purchase List (non-lbc), Randall, 08:04
Ebay Purchase List (non-lbc), Paul Dorsey, 07:44
RE: supercharger for tr6, R. Ashford Little II, 07:11
supercharger for tr6, Alan Salvatore, 06:46
TR6 - Ford Escort Alternator, Janssen, Lee K, 04:53
Clutch inspection plate, John Gillis, 02:34

November 27, 2005

Rookie Done and Back From Test Drive, Marty Clark, 23:02
RE: Tr3 Turn signal/Horn attaching screws, Randall, 22:32
TR6 valve clearences, Thomas Note, 22:30
A/C pulley for TR-6, Alan Salvatore, 18:49
TR4A Sump Guard, Guy D. Huggins, 18:46
RE: Tr3 Turn signal/Horn attaching screws, John Herrera, 14:44
1965 TR4A heater fan motor, Arnold S. Gilmour, 13:22
Donald Malling, Michael Malling, 13:10
Re: Points Pitting, Geo Hahn, 11:47
Re: Rookie Doing TR6 Rear Trailing Arm Bushings and Springs -, Dave1massey, 11:35
Re: Tr3 Turn signal/Horn attaching screws, Ed Woods, 11:33
Tr3 Turn signal/Horn attaching screws, Doug Mathews, 10:58
RE: tappets out of order, Randall, 10:55
RE: tappets out of order, Jack W. Drews, 10:10
Re: TR4A accelerator linkage, Lou Metelko, 09:14
TR4A accelerator linkage, flaedersaft, 08:47
RE: tr6 tachometer, Randall, 08:38
tr6 tachometer, ASesso, 07:51
Re: tappets out of order, Ed Woods, 06:44

November 26, 2005

RE: tappets out of order, Randall, 22:38
Re: Rookie Doing TR6 Rear Trailing Arm Bushings and Springs -, Marty Clark, 22:33
RE: tappets out of order, Dave Connitt, 22:21
tappets out of order, Paul Dorsey, 22:04
RE: Rookie Doing TR6 Rear Trailing Arm Bushings and Springs -, Creig Houghtaling, 22:02
RE: Points Pitting, Randall, 20:40
Re: for Triumphs in the movies spotters, Mo and Dave MacKay, 20:40
GT6+ Seat Cushions, Windoseat, 20:18
points pitting, James McCracken, 19:21
Re: Points Pitting, ZinkZ10C, 18:36
RE: Points Pitting, Randall, 18:26
Points Pitting, MotoPsyche, 18:09
RE: Distributor Vacuum Advance Check, Randall, 18:02
Click-Adjust, Peter Arakelian, 17:46
Distributor Vacuum Advance Check, MotoPsyche, 17:16
Re: Clikadjust valve adjust tool, James R. Holekamp, 15:44
Re: Clikadjust valve adjust tool, TR6UO, 15:07
Re: Rookie Doing TR6 Rear Trailing Arm Bushings and Springs -, Marty Clark, 14:52
HVDA 5 speed, Mitch Seff, 12:59
63 TR4 SHE RUNS!, TR250Driver, 10:32
RE: Trunion Bolts--TR3B, Doug Mathews, 08:21
RE: Trunion Bolts--TR3B, Randall, 02:34
Rookie Doing TR6 Rear Trailing Arm Bushings and Springs - Inner, Marty Clark, 00:08

November 25, 2005

Trunion Bolts--TR3B, Doug Mathews, 19:30
American Racing Wheels, Bill & Skip Pugh, 18:24
RE: Whitworth wrenches, Randall, 16:08
Whitworth wrenches, jim.wallace, 15:35
Clikadjust valve adjust tool, James R. Holekamp, 13:46
Heat Shield Installation, Bob Danielson, 13:14
RE: Oil pressure issue, Cameron Rooke, 12:56
RE: Oil pressure issue, Jim Muller, 12:27
Rookie Doing TR6 Rear Trailing Arm Bushings and Springs -, Marty Clark, 12:20
RE: Oil pressure issue, Randall, 11:37
for Triumphs in the movies spotters, Kinderlehrer, 11:32
RE: Oil pressure issue, Jim Muller, 11:25
RE: Oil pressure issue, Randall, 10:25
Oil pressure issue, Cameron Rooke, 09:56
TR3A door hinges needed.., TR3n6, 07:20

November 24, 2005

TR4 badge bar diameter, James R. Holekamp, 18:06
RE: One of the BEST I have ever seen!! non-adult, Bob Danielson, 17:21
RE: HELP: TR-6 Oil Light on, Randall, 15:34
HELP: TR-6 Oil Light on, Joe, 15:06
TR4: window channel removal, J.C. Hassall, 11:07
RE: H6 spring, rgt2, 10:23
Re: One of the BEST I have ever seen!! non-adult, Jim S., 10:04
Re: Ridiculous TR4 questions again., Dave1massey, 09:11
Re: One of the BEST I have ever seen!! non-adult, KPe9368405, 08:59
RE: H6 spring (Now O-ring), Randall, 08:26
RE: H6 spring, Richard Alexander, 08:11
Re: GT6 Oil drain plug, Cameron Rooke, 07:32
RE: One of the BEST I have ever seen!! non-adult, Peter Ryner, 05:39
Fw: Happy Thanksgiving, fred thomas, 04:48
Re: Ridiculous TR4 questions againRidiculous TR4 questions, AMfoto1, 04:43
American Racing Wheels, CP25616, 03:15

November 23, 2005

Re: GT6 Oil drain plug, Jim Muller, 21:35
Re: Click-Adjust, CarlSereda, 21:31
RE: GT6 Oil drain plug, Randall, 21:24
RE: Ridiculous TR4 questions again., Randall, 21:13
A/C pulley for TR-6, Alan Salvatore, 21:13
FW: XJ6 Parts car? for sale, Ron L'Herault, 20:31
Re: One of the BEST I have ever seen!! non-adult, JustBrits_com, 20:11
Re: Ridiculous TR4 questions again., TR250Driver, 19:29
One of the BEST I have ever seen!! non-adult, JustBrits_com, 18:12
Re: Ridiculous TR4 questions again., ZoboHerald, 17:09
Re: Ridiculous TR4 questions again., Steven Newell, 17:03
Ridiculous TR4 questions again., Randy&Val DeRuiter, 16:20
FW: Check out TRF Christmas Book - TR3A, TR3B, TR4, TR4A,TR250,, Scott Suhring, 16:13
Re: GT6 Oil drain plug, JB@comcast, 15:46
RE: GT6 Oil drain plug, Randall, 15:08
Re: Click-Adjust, Joe, 15:05
RE: TR-6 Differential, Randall, 15:00
Fw: Happy Thanksgiving - this is clever, fred thomas, 13:51
Re: Dia. Tr4 Badge Bar, JustBrits_com, 11:59
RE: web site for Morgans, pethier@isd.net, 11:31
TR6 Heat Shield, Bob Danielson, 11:25
TR-6 Differential, MD.FEED, 11:07
Dia. Tr4 Badge Bar, scharfr, 10:45
RE: GT6 Oil drain plug, Cameron Rooke, 09:22
RE: web site for Morgans, Paige, Dean, 09:11
Re: GT6 Oil drain plug, zoboherald, 08:59
RE: GT6 Oil drain plug, Randall, 08:57
Re: web site for Morgans, Chip19474, 08:24
GT6 Oil drain plug, Cameron Rooke, 07:56
RE: H6 spring, Randall, 07:41
H6 spring, Paul Dorsey, 07:25
Re: Leaking Strombergs, Dave1massey, 06:09

November 22, 2005

Leaking Strombergs, Chris Buckley, 22:17
Re: web site for Morgans, Jim S., 21:02
Click-Adjust, fred thomas, 20:28
Re: web site for Morgans, JustBrits_com, 20:14
Re: Being single has it's advantages, Kurtis, 20:02
web site for Morgans, MIKE CARROLL, 18:56
Re: concours checkoff, JustBrits_com, 18:07
Re: concours checkoff, TR250Driver, 17:44
concours checkoff, William Scherer, 16:32
Re: Need Diameter of Badge Bars, Gerald M Van Vlack, 16:17
RE:New owner of an old TR4 with questions..(floors,sills), pbrandsema, 14:18
Re: New owner of an old TR4 with questions..., AMfoto1, 12:12
Re: Donald Malling, Dave1massey, 11:41
Re: Being single has it's advantages, Dave1massey, 11:38
Re: Donald Malling, John Mitchell, 10:09
RE: Being single has it's advantages, Randall, 08:46
Re: Donald Malling, Philip E. Barnes, 08:42
Being single has it's advantages, Paul Dorsey, 08:00
Re: TRF Loan ..., T. S. White, 07:35
RE: whitworth spanners, Randall, 07:31
Re: License Plates, THOMAS FANSHER, 06:05
Re: License Plates, fred thomas, 05:11
Re: powdercoating vs galvanizing, AMfoto1, 04:28
whitworth spanners, FGFO1, 01:26

November 21, 2005

RE: TR6 high rpm performance, Mark Hooper, 22:00
Condolences to the Don Malling Family, N197TR4, 21:24
Need Diameter of Badge Bars, N197TR4, 21:17
RE: Donald Malling, Bob Danielson, 20:32
Re: TR6 high rpm performance, JB@comcast, 20:06
License Plates, Justin Wagner, 19:58
RE: TR6 high rpm performance, Randall, 19:53
Re: TR6 high rpm performance, JustBrits_com, 18:43
RE: TR6 high rpm performance, Randall, 18:30
TR6 high rpm performance, Jack W. Drews, 18:20
Re: Donald Malling, oliver, 17:01
Re: powdercoating vs galvanising chassis, Dave1massey, 15:00
RE: GT6-3 Flywheel / pp plate studs, Randall, 14:31
Donald Malling, Michael Malling, 14:09
GT6-3 Flywheel / pp plate studs, M. Secrest, 13:34
Re: powdercoating vs galvanising chassis, fred thomas, 13:13
pre-TS8637 engine (low-port, H4 1 1/2" SU carbs) (was: took, Hoyt, 13:08
petrol pricing, fred thomas, 12:47
powdercoating vs galvanising chassis, Mike Clarke, 12:22
RE: "What's A Whit Really Worth?" and Specialty Hand Tools, Randall, 09:58
RE: "What's A Whit Really Worth?" and Specialty Hand Tools, Randall, 09:42
RE: "What's A Whit Really Worth?" and Specialty Hand Tools, Randall, 09:34
RE: TRF Loan ..., Randall, 09:32
New owner of an old TR4 with questions.., Randy&Val DeRuiter, 08:51
RE: TRF Loan ..., Peter Ryner, 08:28
Re: "What's A Whit Really Worth?" and Specialty Hand Tools, Michael Marr, 08:13
RE: Panasport wheel repair/replacement in DC area?, Steinman, Bill, 08:04
Re: TRF Loan ..., Dave1massey, 07:09
help, fred thomas, 07:02
Re: Ammeter hookup?, Dave1massey, 07:01
RE: Ammeter hookup?, Randall, 06:43
Re: TRF Loan ..., Dave1massey, 06:40
RE: TRF Loan ..., Randall, 06:31
Re: TRF Loan ..., Blake J. Discher, 06:16
Re: TRF Loan ..., T. S. White, 05:31

November 20, 2005

Ammeter hookup?, Paul Dorsey, 22:29
"What's A Whit Really Worth?" and Specialty Hand Tools, Hoyt, 22:29
Re: All I could find was............, philip ethier, 20:13
Re: Panasport wheel repair/replacement in DC area?, Don Elliott, 19:47
Re: TR4 - Transmission?, Jim S., 18:59
Looking for a 74 Crank extension fan mount, Kirby Vaughan, 18:31
RE: TR4 - Transmission?, Randall, 18:30
Master Cylinders, PBieling, 16:33
TR4A Brakes Completed, Guy D. Huggins, 14:49
TR4 - Transmission?, Tim I. Purdy, 14:02
Re: TR3 liners (removed), J.C. Hassall, 12:15
Re: All I could find was............, Jim S., 10:47
TRF Loan ..., Bill & Skip Pugh, 09:46
Re: TR3 liners (removed), John Herrera, 09:44
Re: All I could find was............, Lou Metelko, 09:35
RE: Panasport wheel repair/replacement in DC area?, Ted Stevens, 09:14
Re: TR3 liners (removed), Dave1massey, 09:12
Re: All I could find was............, Dave1massey, 09:05
Re: TR3 liners (removed), Terry Smith, 09:05
RE: TR3 liners (removed), Randall, 08:52
Re: TR3 liners (removed), Popnglo, 06:21

November 19, 2005

Re: All I could find was............, Allen Brenden, 23:03
RE: All I could find was............, Randall, 21:10
All I could find was............, Richard Feibusch, 15:55
TR3 liners (removed), Popnglo, 12:43
Panasport wheel repair/replacement in DC area?, Ted Stevens, 11:44
Re: Bionic Wench (?), Phil Bacon, 09:51
Good service, Steven Newell, 06:18

November 18, 2005

need a part, oliver, 20:18
More good service, Jim Muller, 19:21
Good Service, Tim I. Purdy, 18:46
TR4 rpms dropping, Mark Vaden, 15:55
Bionic Wrench, Bob Danielson, 15:38
Re: Understanding the Lucas design process, Graham Stretch, 12:07
TR6 Stainless Carbureter Steel Heat Shield, N197TR4, 10:01

November 17, 2005

FS TR3, Ken Gano, home, 22:44
Looking for a Spit, Jim, 21:29
New a TR3 Starter Solenoid, Bill Brewer, 21:27
TR3 Rear Tube Shock Conversion, Bill Brewer, 21:25
Re: It's a Shame, Hoyt, 20:15
Re: It's a Shame, Lou Metelko, 19:50
Re: It's a Shame, Terry Smith, 19:01
TR4 For Sale, Triumph TR4, 17:12
RE: Help looking for funny Lucas article., Randall, 16:21
Help looking for funny lucas article., Graham Stretch, 16:09
Re: It's a Shame, THOMAS FANSHER, 15:48
Re: It's a Shame, Dave1massey, 15:34
RE: Wanted:- American Racing Wheel, Paige, Dean, 15:24
It's a Shame, fred thomas, 14:57
RE: TR3A pulling an engine, Randall, 10:46
RE: TR3A pulling an engine, Randall, 10:24
RE: TR3A pulling an engine, amcewen2, 07:54

November 16, 2005

Re: took delivery of TS 561 L today . . ., Kurt Oblinger, 19:21
Re: Stub axle removal, Mitch Seff, 17:41
Re: great service, Geo Hahn, 16:15
Re: great service, fred thomas, 15:40
Re: great service, Jack Williams, 14:48
RE: TR3A pulling an engine, Peter Ryner, 14:14
Wanted:- American Racing Wheel, CP25616, 13:43
RE: great service, Randall, 13:16
RE: TR3 calipers?, Randall, 12:55
great service, FGFO1, 12:50
TR 3A Roll bar, tr3bob, 12:32
TR3 calipers?, Jack W. Drews, 12:31
Trying to contact lister - no LBC, Mark Hooper, 11:28
RE: TR3A pulling an engine, Randall, 11:23
AC cars to build a plant in Bridgeport CT, Don Malling, 11:07
Re: Motorhead 101 - A Mitsuoka for you? NOT!, Dave1massey, 11:05
RE: TR3A pulling an engine, amcewen2, 10:48
New British Car Plant, Bob Danielson, 09:02
RE: Motorhead 101 - A Mitsuoka for you? NOT!, Randall, 08:01
Re: Motorhead 101 - A Mitsuoka for you? NOT!, Raymond Hatfield, 07:32
Re: Hard starting (when hot) TR6, Chip19474, 07:05
Re: Fw: Understanding the Lucas design process, PBieling, 06:19
Re: TR3A pulling an engine, Dave1massey, 06:11
Re: Motorhead 101 - A Mitsuoka for you? NOT!, Dave1massey, 06:02

November 15, 2005

RE: TR3A pulling an engine, Randall, 23:11
Re: took delivery of TS 561 L today . . ., Hoyt, 21:47
Hard starting (when hot) TR6, Jack W. Drews, 20:05
TR4 Monza Exhaust Installation, Kurtis Jones, 19:28
XJ6 Parts car? for sale, Ron L'Herault, 19:23
GT6 reply, JONATHAN MOODY, 19:10
Re: took delivery of TS 561 L today . . ., JB@comcast, 18:57
Re: TR3A pulling an engine, JB@comcast, 18:52
took delivery of TS 561 L today . . ., Hoyt, 18:45
Re: Motorhead 101 - A Mitsuoka for you?, JB@comcast, 18:35
Re: TR3A pulling an engine, Hoyt, 18:32
Mitsuoka TD video (was: Motorhead 101 - A Mitsuoka for you?), Hoyt, 18:29
Re: Motorhead 101 - A Mitsuoka for you?, Hoyt, 18:17
RE: TR3A pulling an engine, Randall, 18:09
TR3A pulling an engine, Art McEwen, 17:34
RE: Motorhead 101 - A Mitsuoka for you?, Randall, 17:32
Re: Fw: Understanding the Lucas design process, Kurtis Jones, 17:19
Fwd: pistons/liners TR, Popnglo, 16:49
Re: other news from Japan, Michael Porter, 16:11
Re: Motorhead 101 - A Mitsuoka for you? NOT!, Michael Marr, 15:58
Re: Motorhead 101 - A Mitsuoka for you?, JustBrits_com, 15:54
RE: Motorhead 101 - A Mitsuoka for you? NOT!, Mark Hooper, 15:34
Re: Motorhead 101 - A Mitsuoka for you?, don spence, 15:33
other news from Japan, don spence, 15:32
Re: Motorhead 101 - A Mitsuoka for you?, Cameron Rooke, 14:11
Re: Motorhead 101 - A Mitsuoka for you? NOT!, Michael Marr, 13:58
Re: TR3 BRAKE DESPIRATION!!!!!!!!!!!, Don Malling, 13:20
Re: TR3 BRAKE DESPIRATION!!!!!!!!!!!, Don Malling, 13:19
spare tire lid seal, Cliff Pike, 12:53
Motorhead 101 - A Mitsuoka for you? NOT!, Dennis N Culligan, 12:45
Fw: Understanding the Lucas design process, fred thomas, 11:53
Re: TR3 BRAKE DESPIRATION!!!!!!!!!!!, Geo Hahn, 11:53
RE: TR3 BRAKE DESPIRATION!!!!!!!!!!!, Peter Ryner, 11:22
Re: Motorhead 101 - A Mitsuoka for you?, Philip E. Barnes, 11:07
Re: Motorhead 101 - A Mitsuoka for you?, Michael Marr, 10:50
Re: TR3 BRAKE DESPIRATION!!!!!!!!!!!, Don Malling, 10:47
Motorhead 101 - A Mitsuoka for you?, Richard Feibusch, 10:25
RE: TR3 BRAKE DESPIRATION!!!!!!!!!!!, David Hammond, 10:17
Re: TR3 BRAKE DESPIRATION!!!!!!!!!!!, TR250Driver, 09:50
Re: Mystery Year TR3 on eBay?, Dave1massey, 06:05
Re: Mystery Year TR3 on eBay?, Dave1massey, 05:41
Austin Help, jim williams, 05:16
Re: Off Topic but too funny. I hope I don't offend any pilots, David Brister, 00:47

November 14, 2005

Re: Girling Rear Disk Brakes for TR3/4?, d spence, 23:51
Re: Replacing Wind Screen, ArthurK101, 21:50
Re: TR3 BRAKE DESPIRATION!!!!!!!!!!!, JB@comcast, 21:41
TR3 BRAKE DESPIRATION!!!!!!!!!!!, Paul Dorsey, 21:32
Re: Replacing Wind Screen, TeriAnn Wakeman, 20:00
Re: Mystery Year TR3 on eBay?, Bob Labuz, 19:36
Re: Mystery Year TR3 on eBay?, James Ruffner, 19:31
Re: TR3A pistons/liners BPNW, JB@comcast, 19:12
RE: Mystery Year TR3 on eBay?, C Musson TR, 19:05
RE: Mystery Year TR3 on eBay?, Randall, 19:01
Replacing Wind Screen, Roger N. Smith, 18:59
Re: What a difference tires make, Jim S., 18:51
Re: TR3A pistons/liners BPNW, Bill McLeod, 18:36
Re: Mystery Year TR3 on eBay?, Bill McLeod, 18:34
Re: Mystery Year TR3 on eBay?, Bill McLeod, 18:31
GT6 engine rebuild questions, Roger Elliott, 18:21
TR3A pistons/liners BPNW, Popnglo, 18:06
Mystery Year TR3 on eBay?, Hoyt, 18:03
Re: Aluminum hub soon available, Raymond Hatfield, 14:23
Re: Girling Rear Disk Brakes for TR3/4?, Hoyt, 14:17
Re: Girling Rear Disk Brakes for TR3/4?, Hoyt, 14:14
Re: Girling Rear Disk Brakes for TR3/4?, Mike Kitchener, 13:18
RE: Mailing List Affecting TR4 Performance, Mark Hooper, 12:43
RE: Girling Rear Disk Brakes for TR3/4?, Randall, 12:37
Girling Rear Disk Brakes for TR3/4?, Hoyt, 11:56
RE: Mailing List Affecting TR4 Performance, Randall, 11:55
Re: Mailing List Affecting TR4 Performance, Steven Newell, 11:54
RE: Off Topic but too funny. I hope I don't offend any pilots, Randall, 11:52
Re: Aluminum hub soon available, Hoyt, 11:42
Re: Mailing List Affecting TR4 Performance, fred thomas, 11:31
Re: Made it 1/2 way -- and the other 1/2 too, Andrew Frink, 11:30
Off Topic but too funny. I hope I don't offend any pilots out, Dave Connitt, 10:42
Mailing List Affecting TR4 Performance, Jeffrey J. Barteet, 10:37
Aluminum hub soon available, Jack W. Drews, 09:47
What a difference tires make, davgil, 07:55
Re: GT6 Parts, Cameron Rooke, 06:47

November 13, 2005

Nokofs, Tomislav Marincic, 19:22
Re: GT6 Parts, Roger Elliott, 18:46
FW: Finally an understandable Lucas schematic, Jim Bauder, 18:04
RE: Nokof Spinners for original Minilites, Nicholas Wolf, 17:28
Triumph 2000 for sale locally, Bill McLeod, 12:12
RE: TR3 liners/pistons, Randall, 10:28
Re: head is off!, T. S. White, 07:08
TR3 liners/pistons, Popnglo, 05:50

November 12, 2005

Re: GT6 Parts, shovel, 19:13
RE: head is off!, Peter Ryner, 18:29
Re: GT6 Parts, Jim, 18:11
Re: head is off!, Dave1massey, 17:37
TR3 caliper curiosity, Paul Dorsey, 17:25
Re: GT6 Parts, Dave1massey, 17:25
Re: Powder Coating, Dave1massey, 17:16
Re: question re rebuilding, Dave1massey, 17:13
RE: GT6 Parts, Randall, 17:09
GT6 Parts, Alexander Delis, 16:46
Re: Stub axle removal, Mitch Seff, 13:25
Powder Coating, Michael Marr, 12:27
Stub axle removal, Mitch Seff, 12:25
Re: question re rebuilding, fred thomas, 11:55
RE: question re rebuilding, Randall, 11:14
RE: question re rebuilding, Peter Ryner, 10:42
question re rebuilding, JONATHAN MOODY, 09:50
Re: TR6 Lower Suspension - Threaded Hole Plug, Chip19474, 09:44
Re: Made it 1/2 way, Kurtis Jones, 06:48

November 11, 2005

Re: Nokof Spinners for original Minilites, McGaheyRx, 21:54
head is off!, JONATHAN MOODY, 20:26
Re: TR3 bumper spare tire, Rich White, 19:02
Re: FT in TRF Catalog!, terryrs, 18:48
Re: TR6 spin on oil filter?, emanteno, 18:29
SOOO bad I gotta share !!!!, JustBrits_com, 18:18
RE: Nokof Spinners for original Minilites, John Herrera, 16:19
Re: Synthetic oils, TR250Driver, 16:14
Re: TR6 spin on oil filter?, Tim Hutchisen, 15:54
Nokof Spinners for original Minilites, Neal Mugherini, 15:51
Re: reproduction car?, ZinkZ10C, 15:10
RE: Synthetic oils, Randall, 15:09
Synthetic oils, Gerald M Van Vlack, 14:38
Re: TR3 bumper spare tire, Dave1massey, 14:36
FW: TR2 is back home from sleeping since 1979 - How best to, Christian.Simonsen, 13:23
Re: TR3 bumper spare tire, TR250Driver, 13:20
Re: TR3 bumper spare tire, fred thomas, 13:12
Re: TR3 bumper spare tire, Steven Newell, 12:37
RE: TR3 bumper spare tire, Randall, 12:33
RE: TR3 Lifting Jack, Randall, 12:27
Re: TR3 bumper spare tire, John Herrera, 12:26
Re: TR3 bumper spare tire, Dave1massey, 12:23
Made it 1/2 way, Andrew Frink, 12:18
Re: Getting the brake drum back on, John Mitchell, 12:01
Re: TR3 bumper spare tire, TeriAnn Wakeman, 11:54
TR3 Lifting Jack, D&B Lambert, 11:33
Re: TR3 bumper spare tire, Dave1massey, 11:07
Re:TR6 hard starting, d spence, 09:38
Was Italia - Now Peerless & Doretti, Bill Brewer, 09:08
RE: head removal, Randall, 08:12
RE: head removal, Randall, 08:02
Re: TR6 spin on oil filter?, Terry Geiger, 07:57
Re: TR3 bumper spare tire, TeriAnn Wakeman, 07:33
Re: TR6 spin on oil filter?, Dave1massey, 06:38
Re: head removal, Dave1massey, 06:27
Re: cylinder head removal question, Dave1massey, 06:18
Re: Words (was : overdrive lube) (no LBC content), Dave1massey, 06:00
Re: TR3 bumper spare tire, Dave1massey, 05:48
Re: TR3 bumper spare tire, Dave1massey, 05:46
TR6 spin on oil filter?, Janssen, Lee K, 04:38

November 10, 2005

RE: head removal, Randall, 20:20
Getting the brake drum back on, John Mitchell, 20:16
Re: TR1 Cutaway drawing?, James Ruffner, 20:09
head removal, JONATHAN MOODY, 19:49
Re: powder blue TR4 from 1961, first owner the actor/comedian, BearTranserv, 19:36
Re: Italia, ZoboHerald, 19:30
Re: reproduction car?, emanteno, 18:54
cylinder head removal question, JONATHAN MOODY, 18:51
RE: Words (was : overdrive lube) (no LBC content), Randall, 18:14
TR6 Lower Suspension - Threaded Hole Plug, Andy Schwarz, 18:06
Re: Update on Stuck Hood on '74 TR6, TR250Driver, 17:53
RE: Italia, Randall, 17:38
Re: Words (was : overdrive lube) (no LBC content), Michael Porter, 17:34
Re: Italia, Don Spence, 17:25
Re: reproduction car?, Don Spence, 17:19
Words (was : overdrive lube) (no LBC content), Randall, 16:58
RE: TR4 overdrive problem, Randall, 16:53
Re: TR3 bumper spare tire, Bill McLeod, 16:42
TR4 overdrive problem, Steven Newell, 16:39
Re: overdrive lube, Michael Porter, 16:29
Re: FT in TRF Catalog!, Bill & Skip Pugh, 16:25
Re: TR3 bumper spare tire, shrack04@netzero.net, 16:20
Re: overdrive lube, Dave1massey, 15:44
RE: TR6 hard starting, Randall, 15:37
Re: TR3 bumper spare tire, Geo Hahn, 15:24
RE: overdrive lube, Randall, 15:19
Re: Winterizing, Lou Metelko, 15:06
Update on Stuck Hood on '74 TR6, gganoung, 14:12
Re: reproduction car?, Dave1massey, 12:45
Re: reproduction car?, Michael Marr, 12:42
Re: Height of car front, GT 6 and TR-6, zoboherald, 12:41
Re: TR1 Cutaway drawing?, zoboherald, 12:36
Re: Italia, zoboherald, 12:31
Re: reproduction car?, Don Malling, 12:27
RE: Winterizing the TR6 ... distilled wisdom please, pethier@isd.net, 11:56
RE: overdrive lube, John Herrera, 11:52
Re: reproduction car?, John Innis, 11:39
Winterizing a TR6, Dennis N Culligan, 11:38
Re: FT in TRF Catalog!, pethier@isd.net, 11:31
RE: reproduction car?, R. Ashford Little II, 11:22
Re: Winterizing the TR6 ... distilled wisdom please, Don Spence, 11:10
Re: TR1 Cutaway drawing?, Dave1massey, 11:09
RE: Italia, Randall, 10:59
RE: overdrive lube, Randall, 10:46
RE: reproduction car?, Dave Connitt, 10:31
Re: Italia, Doug, 10:31
TR6 hard starting, Jack W. Drews, 10:23
RE: Winterizing the TR6 ... distilled wisdom please, Bob Danielson, 10:00
TR1 Cutaway drawing?, Hoyt, 09:49
Re: TR3 bumper spare tire, Lou Metelko, 09:35
RE: overdrive lube, John Herrera, 09:34
Re: Italia, elliottr, 09:25
Re: reproduction car?, Don Malling, 09:21
Re: Winterizing the TR6 ... distilled wisdom please, Dave1massey, 09:15
Re: Winterizing the TR6 ... distilled wisdom please, Dave1massey, 08:57
Re: TR3 bumper spare tire, Dave1massey, 08:47
Re: Winterizing the TR6 ... distilled wisdom please, Dave1massey, 08:40
Re: winterizing, emanteno, 08:38
Re: New Frame, Robert M. Lang, 08:19
Re: Italia, McGaheyRx, 08:17
Height of car front, GT 6 and TR-6, Ron L'Herault, 08:07
RE: Italia, Randall, 08:06
Re: Italia, zoboherald, 07:56
Re: GT6 Questions, zoboherald, 07:51
RE: winterizing, Randall, 07:48
reproduction car?, Jack W. Drews, 07:40
winterizing, Jack W. Drews, 07:30
Re: Winterizing the TR6 ... distilled wisdom please, T. S. White, 07:27
TR3 bumper spare tire, Paul Dorsey, 07:04
RE: Winterizing the TR6 ... distilled wisdom please, CFisher, 06:36
Italia, John Gillis, 05:22
Re: FT in TRF Catalog!, fred thomas, 04:19

November 09, 2005

OD Lube (again), Thomas Note, 22:49
New Frame, Alan Salvatore, 22:26
test, Rick & Cecilia, 22:03
RE: Winterizing the TR6 ... distilled wisdom please, Randall, 21:58
RE: Winterizing the TR6 ... distilled wisdom please, Randall, 21:54
RE: powder blue TR4 from 1961, first owner the actor/comedian, Randall, 21:51
RE: Winterizing the TR6 ... distilled wisdom please, Jim Muller, 21:48
Re: Winterizing the TR6 ... distilled wisdom please, Don Malling, 21:46
Re: FT in TRF Catalog!, ArthurK101, 21:44
RE: Bentley for TR3?, Randall, 21:42
RE: Winterizing the TR6 ... distilled wisdom please, Randall, 21:12
RE: Winterizing the TR6 ... distilled wisdom please, Randall, 21:03
Re: GT6 Questions, Jim, 20:57
FT in TRF Catalog!, Bill Brewer, 20:51
Re: GT6 Questions, Jim, 20:32
Re: Winterizing the TR6 ... distilled wisdom please, Dave1massey, 20:11
Re: Winterizing the TR6 ... distilled wisdom please, Dave1massey, 20:06
Re: Winterizing the TR6 ... distilled wisdom please, Dave1massey, 20:04
Re: GT6 Questions, Jim Muller, 20:02
Bentley for TR3?, TR3n6, 19:38
Re: Winterizing the TR6 ... distilled wisdom please, philip ethier, 19:34
RE: powder blue TR4 from 1961, first owner the actor/comedian, Ken Gano, home, 19:20
Re: Winterizing the TR6 ... distilled wisdom please, Hoyt, 18:23
RE: starter, Randall, 18:15
starter, Jim & Kay, 17:52
RE: overdrive lube, Randall, 17:49
Re: overdrive lube, TR250Driver, 17:39
RE: Winterizing the TR6 ... distilled wisdom please, Randall, 17:38
Re: GT6 Questions, Roger Elliott, 17:37
Re: Winterizing the TR6 ... distilled wisdom please, TR250Driver, 17:14
Re: Winterizing the TR6 ... distilled wisdom please, Terry Smith, 17:06
Re: GT6 Questions, Jim, 16:58
Re: overdrive lube, Lou Metelko, 16:42
GT6 Questions, ols, 16:32
Re: powder blue TR4 from 1961, first owner the actor/comedian, James Ruffner, 15:31
overdrive lube, Thomas Note, 14:00
Re: Winterizing the TR6 ... distilled wisdom please, Dave1massey, 11:24
TR3 master cylinder trivia and question, Randall, 11:05
Re: powder blue TR4 from 1961, first owner the actor/comedian, ArthurK101, 10:45
floor pan for TR3, FGFO1, 10:11
Barn Sale - Update!, Chip19474, 10:04
Re: powder blue TR4 from 1961, first owner the actor/comedian, Steven Newell, 09:52
Re: Winterizing the TR6 ... distilled wisdom please, TR250Driver, 08:34
Re: powder blue TR4 from 1961, first owner the actor/comedian, Geo Hahn, 08:03
Re: Winterizing the TR6 ... distilled wisdom please, Dave1massey, 07:17
Winterizing the TR6 ... distilled wisdom please, Harry White N1QVE, 06:49
Minor change to list, Mark J. Bradakis, 00:03

November 08, 2005

Re: powder blue TR4 from 1961, first owner the actor/comedian, Steve Ball, 21:33
Re: Troubled TR 8/7 - Triumphs daily digest V1 #2435, wayne s, 19:02
know of anyone buying cores?, Don Elliott, 17:44
New Triumph Acclaim website, Michael Hargreave Mawson, 13:53
RE: GET oil dipstick tube, Paige, Dean, 13:36
GT6 oil dipstick tube, elliottr, 11:06
RE: differential rebuilder in SC or NC?, Jim Bauder, 09:26
Re: differential rebuilder in SC or NC?, Don Malling, 07:01

November 07, 2005

Re: TR4 hi-torque starter problem: the answer, J.C. Hassall, 21:38
Gearbox Reconditioning for TR4A, Guy D. Huggins, 18:21
RE: TR3 Tranny question, Randall, 18:10
TR3 Tranny question, Doug Mathews, 17:42
Re: Troubled TR8/TR7 VE add on, Dave1massey, 17:11
Re: Troubled TR8/TR7 VE, Dave1massey, 17:10
Re: Troubled TR8/TR7 VE, TR250Driver, 13:06
RE: TR4 fan Q2, Randall, 12:46
RE: Troubled TR8/TR7 VE, Randall, 12:41
Re: Troubled TR8/TR7 VE add on, TR250Driver, 12:27
Troubled TR8/TR7 VE, TR250Driver, 11:55
RE: New heater valve leaking, Bob Danielson, 11:34
New heater valve leaking, Steinman, Bill, 09:48
Re: TR4 fan Q2, Steven Newell, 09:32
Re: TR4 fan Q2, John Herrera, 09:12
RE: Fall in the Rockies, John Herrera, 09:03
Re: differential rebuilder in SC or NC?, TR250Driver, 08:04
RE: Condensor capacitance value?, CFisher, 07:01
Re: TR4 fan Q2, Michael Marr, 06:32
Re: TR4 fan Q2, Dave1massey, 06:27
differential rebuilder in SC or NC?, Tim Gaines, 05:47
Re: TR4 fan Q2, Bill McLeod, 05:33
Re: TR4 fan Q2, John Gillis, 02:47

November 06, 2005

re: TR4 steering rack compatability question, CarlSereda, 23:23
Re: TR4 hi-torque starter problem, Chas. Schlismann, 18:48
Re: TR4 hi-torque starter problem, JustBrits_com, 17:54
Re: Replacing Rear Springs - Anything Else At The Same Time?, JustBrits_com, 17:53
RE: Replacing Rear Springs - Anything Else At The Same Time?, Randall, 17:06
RE: TR4 hi-torque starter problem, Randall, 17:03
RE: Spitfire Carb, Randall, 16:55
TR4 hi-torque starter problem, J.C. Hassall, 16:49
Fall in the Rockies, levilevi, 16:17
TR4 steering rack compatability question, Donald Mostrom, 15:55
gauges, , 15:07
Spitfire Carb, Roger Elliott, 13:57
Re: Replacing Rear Springs - Anything Else At The Same Time?, Marty Clark, 12:42
Re: TR3A console wiring, Art McEwen, 10:24
RE: facia & Gauges, Randall, 08:51
Re: Clutch not releasing, Geo Hahn, 08:48
facia & Gauges, fred thomas, 08:13
Re: TR6 frame, Dave1massey, 07:57
Re: Replacing Rear Springs - Anything Else At The Same Time?, Dave1massey, 07:55
Re: TR6 frame, fred thomas, 07:46
Re: TR6 frame, Dave1massey, 07:13

November 05, 2005

RE: Paint prices??, Dave Connitt, 20:52
RE: Clutch not releasing, Randall, 20:05
RE: Clutch not releasing, Randall, 20:03
Empty trialer traveling from Florida to Arkansas, Brad Kahler, 20:01
RE: Clutch not releasing, Randall, 20:00
RE: TR3A console wiring, Randall, 19:54
Re: Clutch not releasing, Joe Lynn, 19:32
Re: TR3A console wiring, fred thomas, 19:22
Re: TR3A console wiring, ZoboHerald, 19:17
Re: Clutch not releasing, Joe Lynn, 18:51
Re: TR3A console wiring, Hoyt, 18:50
Re: TR3A console wiring, Steven Newell, 17:46
RE: TR3A console wiring, Randall, 17:40
Fwd: TR3A console wiring, MotoPsyche, 17:05
Re: TR3A console wiring, Bob Labuz, 16:51
RE: TR3A console wiring, Randall, 16:51
RE: TR3A console wiring, Randall, 16:49
Re: TR3A console wiring, Bob Labuz, 16:33
Re: TR3A console wiring, Bob Labuz, 16:31
RE: TR3A console wiring, Randall, 16:21
RE: guesstimate of value, Dave Willner, 16:06
re: TR3A console wiring, amcewen2, 15:49
Re: TR4 Starter Q, Tim I. Purdy, 15:08
RE: Clutch not releasing, John Herrera, 13:54
Re: Replacing Rear Springs - Anything Else At The Same Time?, Marty Clark, 12:48
and I thought my kids were hard on cars :-), Ken Gano, home, 12:42
Re: Clutch not releasing, Geo Hahn, 12:40
RE: Replacing Rear Springs - Anything Else At The Same Time?, Randall, 12:03
RE: Replacing Rear Springs - Anything Else At The Same Time?, Randall, 11:40
Replacing Rear Springs - Anything Else At The Same Time?, Marty Clark, 11:28
RE: Clutch not releasing, Randall, 10:30
Flotech oil coolers: Fitting size? Contact info?, Mike Sharp, 09:57
Clutch not releasing, Joe Lynn, 09:52
Re: TR6 frame, Hoyt, 09:30
RE: TR6 frame, Nicholas Wolf, 08:47
RE: TR4 fan, Nicholas Wolf, 08:39
Re: Laylock O/D and transmission ID ?, James Ruffner, 07:42
guesstimate of value, fred thomas, 06:57

November 04, 2005

[Fwd: Re: original Michelotti TR4 sketch?], Bill McLeod, 22:27
RE: original Michelotti TR4 sketch?, Ken Gano, home, 21:56
original Michelotti TR4 sketch?, philip ethier, 21:31
re: TR4 fan, CarlSereda, 21:25
Re: Paint prices??, John A. Wise, 20:20
RE: TR4 Starter Q, Randall, 20:00
Re: TR4 Starter Q, John Runge, 19:09
Re: TR4 Starter Q, John Runge, 19:04
RE: TR4 Starter Q, Randall, 18:57
Re: Paint prices??, Doug Mathews, 18:42
TR4 Starter Q, Tim I. Purdy, 18:39
Re: Laylock O/D and transmission ID ?, Hoyt, 18:36
Re: Paint prices??, ZinkZ10C, 18:27
RE: TR4 fan, Mark Hooper, 17:54
Re: TR4 fan, Jim S., 17:31
Paint prices??, Barry Schwartz, 16:42
Re: TR4 fan, Dave1massey, 13:59
TR4 fan, Mark Vaden, 12:22
RE: Laylock O/D and transmission ID ?, Randall, 11:31
Laylock O/D and transmission ID ?, Hoyt, 11:11
Re: TR6 frame, Dave1massey, 06:16

November 03, 2005

Re: TR6 frame, TR3n6, 19:10
Re: The VTR discussion, Terry Smith, 19:09
VTR, fred thomas, 18:14
RE: More high tech/old car crossover gadgets, Mark Hooper, 14:18
Re: More high tech/old car crossover gadgets, Dave1massey, 11:12
Re: Forgive me, Roger Helman, 11:06
Re: More high tech/old car crossover gadgets, Dave1massey, 11:04
Re: More high tech/old car crossover gadgets, zoboherald, 09:30
TR3 split steering column, tr3bob, 08:32
More high tech/old car crossover gadgets, Steven Newell, 08:11
Good source for new Redlines, Steinman, Bill, 07:03
Re: The VTR discussion, Gerald M Van Vlack, 05:12
Re: The VTR discussion, Hoyt, 01:14

November 02, 2005

Re: door hinges, ArthurK101, 22:53
RE: TR3A console wiring, Randall, 20:29
TR3A console wiring, Paul Dorsey, 19:56
door hinges, Bob Labuz, 18:59
RE: Lockheed Master Cylinder/TR2 restoration, Randall, 17:45
Re: Lockheed Master Cylinder/TR2 restoration, Hoyt, 17:03
Lockheed Master Cylinder/TR2 restoration, Hoyt, 16:45
help w/ placement on TR3, Paul Dorsey, 16:37
Laycock Overdrive Identification Redux, Hoyt, 16:36
Re: Cool Retro TR250/5 Music Video, Kurtis Jones, 15:41
Forgive me, R. Ashford Little II, 15:04
Cool Retro TR250/5 Music Video, Kurtis Jones, 14:30
Re: Looking for TR6 frame - RATCO Inc. Yaphank, NY (631), Ted, 13:57
RE: ammeter replaced with idiot light?, Mark Hooper, 11:24
Re: re. Going retro with cassette tapes, Dave1massey, 11:17
RE: re. Going retro with cassette tapes, Mark Hooper, 10:55
RE: ammeter replaced with idiot light?, Randall, 08:32
Re: Spark Plug Heat Range, Chip19474, 08:18
RE: Going retro with cassette tapes, Greg, 08:17
Looking for TR6 frame, Wages, Jeffrey, 07:46
Re: ammeter replaced with idiot light?, fred thomas, 07:35
Re: The VTR discussion, Gerald M Van Vlack, 06:44
Re: ammeter replaced with idiot light?, Barry Schwartz, 06:32
Re: Going retro with cassette tapes, Kurtis Jones, 06:02
Re: re. Going retro with cassette tapes, Dave1massey, 05:59
Re: Condensor capacitance value?, Dave1massey, 05:43
Read a Good Plug Lately?, MotoPsyche, 05:21

November 01, 2005

RE: Upper Radiator Hose for TR3A, Randall, 22:38
RE: ammeter replaced with idiot light?, Randall, 22:32
RE: Spark Plug Heat Range, Hugh Barber, 22:02
ammeter replaced with idiot light?, Paul Dorsey, 21:34
Upper Radiator Hose for TR3A, MotoPsyche, 20:50
Re: tool kit addition: inflatable dinosaur, Hoyt, 20:25
Spark Plug Heat Range, John Mitchell, 20:24
Re: The VTR discussion, KPe9368405, 19:15
The VTR discussion, Ed Woods, 18:59
Re: tool kit addition: inflatable dinosaur, George Richardson, 18:26
RE: 3a wiring - horns, Randall, 17:49
RE: re. Going retro with cassette tapes, Randall, 17:45
Re: re. Going retro with cassette tapes, Steven Newell, 17:45
RE: Condensor capacitance value?, Randall, 17:36
RE: re. Going retro with cassette tapes, Randall, 17:05
Re: TR3A rear valance, Terry Smith, 16:25
Re: mysterious bracket for a TR3?, Terry Smith, 16:15
RE: re. Going retro with cassette tapes, Mark Hooper, 15:58
TR-3A box vs rack&pinion steering, James Ruffner, 15:49
Re: re. Going retro with cassette tapes, ZinkZ10C, 15:28
Re: Losing My Transmission (Spinal Tappets on NPR?), Geo Hahn, 13:08
Re: FW: alternative hardtop attachment brackets?, Raymond Hatfield, 12:44
Re: shortening mounting bolts, THOMAS FANSHER, 12:25
Condensor capacitance value?, CFisher, 11:39
TR-6 For Sale - NFI, JustBrits_com, 11:39
re. Going retro with cassette tapes, Greg, 10:55
3a wiring - horns, jim.wallace, 10:14
Re: FW: alternative hardtop attachment brackets?, pethier@isd.net, 09:57
RE: NOT MINE Triumph TR6 for sale, John Herrera, 09:51
FW: alternative hardtop attachment brackets?, David Hammond, 09:48
tool kit addition: inflatable dinosaur, Steven Newell, 09:19
Re: shortening mounting bolts, Dave1massey, 06:09
RE: symptoms of bad coil?, Bob Danielson, 05:58
Re: Losing My Transmission (Spinal Tappets on NPR?), Dave1massey, 05:50