triumphs
[Top] [All Lists]

Re: Getting the brake drum back on

To: Gerald M Van Vlack <jerryvv@alltel.net>, 6-Pack
Subject: Re: Getting the brake drum back on
From: John Mitchell <jmitch@snet.net>
Date: Fri, 11 Nov 2005 14:01:16 -0500
    The piston had moved completely out of the bore and was slightly 
cocked(which I wish I had gotten:)  A flick of a screwdriver and it slid 
back and and the drum went right on.    Thanks to everyone who 
replied.   John

Gerald M Van Vlack wrote:

>John, The wheel cylinder can also slide on it's mounting. That's how the
>brakes equalize force front to back in lieu of having 2 piston wheel
>cylinders. If you do a next step of centering the wheel cylinder in it's
>travel with what you have already done the drum should go back on. Look for
>a shoe that has moved off of it's upper resting pad as well.
>JVV
>----- Original Message -----
>From: "John Mitchell" <jmitch@snet.net>
>To: <undisclosed-recipients:>
>Sent: Thursday, November 10, 2005 10:16 PM
>Subject: Getting the brake drum back on
>
>
>  
>
>>   I have one brake drum off to replace a worn hub.  Without thinking I
>>pushed the brake pedal pushing out the wheel cylinder somewhat and now I
>>cant get the drum back on.  I've tried opening the bleeder and using a
>>big clamp to push in on the shoes to no avail.   The brakes were rebuilt
>>last year and the wheel cylinders are new.  I also scewed the adjusters
>>all the way anti-clockwise. Anyone have any suggestions?    TIA.  John
>>Mitchell    76 TR6


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org



<Prev in Thread] Current Thread [Next in Thread>