> Even though it's only been seven years since I removed the wiring harness
> from my 3A, I can't recall a detail about the horn wires:
> Are there two wires emanating from the horn fuse, one to each horn, or, is
> there one wire to the right horn, and a wire crossing somewhere under the
> apron to the left horn?
When in doubt, check the factory wiring diagram. It shows that there are
two wires leaving the fuse block, one for each horn.
There is a wire that crosses over, but it's on the button side of the horns,
and crosses through the wiring harness on the bulkhead, not under the apron.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|