triumphs
[Top] [All Lists]

points pitting

To: triumphs@autox.team.net
Subject: points pitting
From: "James McCracken" <desnfab@hotmail.com>
Date: Sat, 26 Nov 2005 21:21:28 -0500
don't let the condenser off the hook. if it is not "sized" properly the 
points will pit up right away, and if you think the parts guy has the right 
one, well...........  if the transfer of material is from the ground to the 
positive the condenser is either too big (or too small, i can never remember 
which, and now-a-days it dosen't much matter) but that's how you tell which 
way to go in sizing it. i think i have the proper information somewhere, and 
i'll look for it if need be
jim


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org



<Prev in Thread] Current Thread [Next in Thread>