Randall,
Thanks..I had forgotten I had already downloaded that hardware
catalog and I fond the bolts. Yes, the long ones they are parts
HB0925 + HB0926 3/8UNF 3 1/4 and 3 1/8.
Thanks for jogging my memory.
At 04:34 AM 11/26/2005, you wrote:
> > I seem never to learn (although I am getting better)....I seem to
> > have misplaced the bolts that attach the steering unit (TR3-B) to the
> > frame of the car. I've looked at Moss's catalog as well as the TR
> > parts manual and the Triumph shop manual and I may just be
> > overlooking it, bit I cannot find any reference to the bolts but an
> > "HB....." # which I also cannot cross reference.
>
>I could, if you'd quote the rest of the number. The magic decoder
>ring is also
>known as the Hardware Catalogue for use with Standard Triumph Vehicles, and
>Francois has kindly posted a copy of the scan produced by a consortium of list
>members a few years ago at
>http://iai.eivd.ch/users/fwi/cars/docs/Standard_Triumph_Hardware_Catalog.pdf
>or
>http://makeashorterlink.com/?K1252583C
>
> > I'm sure the collective wisdom of the list can provide me with the
> > specs I need.
>
>Sorry, I don't know them offhand and I'm too lazy to go hunt through
>the SPC at
>the moment. But it's not rocket science by any means, a simple
>ruler should be
>plenty accurate enough to measure the car to find out what diameter and length
>you need. I'm pretty sure they are NF thread, probably 3/8" diameter. Of
>course I'm assuming you want the rather long bolts that fasten the bracket to
>the frame, rather than the shorter bolts that clamp the bracket onto the
>trunnion on the steering box.
>
>Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|