6pack (date)

December 31, 2002

Tires for Wire Wheels, Tommy Thompson, 23:52
Air Pressure - Michellin RedLines, Bob Fabie, 23:46
Can you explain these holes?, John Phillips, 20:02
starter relay/ horn relay, Gene Holtzclaw, 19:51
Re: In the future, Doug Dwyer, 19:07
In the future, Jim Swarthout, 18:50
RE: Let's make a Deal!!!, Jim Swarthout, 18:47
Let's make a Deal!!!, R. Ashford Little II, 16:56
Fwd: Re: Polyurethane Trailing Arm Bushes?'s, Terry Geiger, 16:21
Polyurethane Trailing Arm Bushes?'s, Richard Seaton, 16:04
Man of the year, YeOldEd, 16:03
Need really good Triumph logo artwork, Vito Pacione, 14:37
Suspension springs and lowering?'s, Richard Seaton, 14:34
Fwd: Bullet bumpers, StuBeatty, 14:33
Re: TR6 trailer, jack williams, 14:13
RE: TR6 trailer, Jim Swarthout, 14:04
Re: TR6 trailer, Terry Geiger, 14:03
Re: TR6 trailer, martin presley, 13:57
TR6 trailer, Ronald A. Dowty, 13:29
RE: Bullet bumpers, Creamer, Mark, 12:57
Re: Bullet bumpers, Paula J. Graffam, 12:46
Re: Lists - Man of the Year, Sally or Dick Taylor, 12:18
Re: TR6 Anti Run On Valve, Terry Geiger, 12:17
Re: Lists - Man of the Year, LaJoMor, 10:26
Re: Lists - Man of the Year, jay_welch, 08:24
Re: Brake Servo Question, Frank Meert, 08:08
Re: Lists - Man of the Year, Tom Di Iulio, 07:50
Lists - Man of the Year, Bob Fabie, 07:09
tr6 engine for sale, englishatwork, 05:41
Re: oil light, Sally or Dick Taylor, 00:51

December 30, 2002

Re: Winter Engine Project, Doug Dwyer, 23:29
Winter Engine Project, Rick, 23:09
Re: Bullet bumpers, Gary Fluke, 22:31
Re: TR250 taillight housing rechrome -- light sockets, Gary Fluke, 22:21
Window seal installation questions, Rick, 21:23
Re: Way off topic, just need a pointer, Phil Parcells, 19:16
Re: Tie rod assembly, Shane Ingate, 19:08
oil light, SamuelsMA, 19:05
RE: distributor shaft runout, Jim Swarthout, 18:43
Way off topic, just need a pointer, Mark Creamer, 18:18
Re: TR6 Anti Run On Valve, Walter Fogle, 17:47
Re: TR6 Anti Run On Valve, Alan, 17:40
Re: Bullet bumpers, Tom Di Iulio, 17:36
TR6 Anti Run On Valve, Jim Davis, 17:18
Bullet bumpers, Paula J. Graffam, 14:27
RE: distributor shaft runout, Lumia, John, 14:09
Re: Early vs. Late Bumpers, Doug Dwyer, 12:46
RE: Brake Servo Question, Peter Zaborski, 12:26
TR250 taillight housing rechrome -- light sockets, Don Malling, 12:06
Brake Servo Question, Acekraut11, 11:50
RE: brown TR6 sighting - Washington, D.C., Creamer, Mark, 11:12
Re: Winter Engine Project, Robert M. Lang, 10:58
Re: Can you explain these holes?, Robert M. Lang, 10:43
brown TR6 sighting - Washington, D.C., Vink, Graham, 10:01
Re: Getting the head off the block, Robert M. Lang, 09:54
Re: Crankshaft Bolt?, Robert M. Lang, 09:38
Re: Cam question at Triumph 2000 Web page, Robert M. Lang, 09:03
Re: Winter Engine Project, Shane Ingate, 07:02
Thanks for not laughing/mounts, Paula J. Graffam, 06:14
LBC Models, Todd Bermudez, 05:57

December 29, 2002

ignition switch/wiring, Gene Holtzclaw, 22:19
Re: Winter Engine Project, Tom Di Iulio, 20:00
Re: Can you explain these holes?, Cris Hemingway, 19:33
Re: Winter Engine Project, Shane Ingate, 19:06
Re: Cam question at Triumph 2000 Web page, Shane Ingate, 18:49
Re: Can you explain these holes?, Tom Di Iulio, 18:43
Can you explain these holes?, Ronald A. Dowty, 18:20
Re: Crankshaft Bolt?, Nick Gemas, 18:00
Tie rod assembly, Dale, 10:20
RE: Winter Engine Project, KTnKT, 02:01
RE: Cam question at Triumph 2000 Web page, Navarrette, Vance, 00:09

December 28, 2002

Window seal installation questions, Navarrette, Vance, 23:59
Re: Early vs. Late Bumpers, Doug Dwyer, 23:04
Update or More on Trans Conversion, John Reynolds, 21:59
Re: Getting the head off the block, lionel klotz, 19:21
Re: Dripping pinion seal, Peter Macholdt, 17:52
Re: Dripping pinion seal, jack williams, 17:46
Re: Dripping pinion seal, Alan, 17:44
Dripping pinion seal, Richard Seaton, 17:20
Installing Rear Differential Mounts, Paula J. Graffam, 16:27
Crankshaft Bolt?, Nick Gemas, 16:12
Re: Cam question at Triumph 2000 Web page, mitch, 16:08
Re: Re:Degree symbol, was Winter Engine Project, Doug Dwyer, 13:45
Refurbishing TR6 Gages - Part II, Hugh Fader, 13:39
Re:Degree symbol, was Winter Engine Project, Doug Dwyer, 13:20
RE: Crankshaft Bolt?, Hugh Fader, 13:17
Re: Cam question at Triumph 2000 Web page, Erik Quackenbush, 13:03
Re: Winter Engine Project, Sally or Dick Taylor, 12:58
Re: Crankshaft Bolt?, Sally or Dick Taylor, 12:50
Re: Winter Engine Project, jay_welch, 12:48
Re: Winter Engine Project, Sally or Dick Taylor, 12:37
Re: LensTail Lights, LaJoMor, 08:07
LensTail Lights, ChuckC4000, 07:19
Winter Engine Project, DarcyHunt, 06:50
Re: Cam question at Triumph 2000 Web page, Don Malling, 06:38

December 27, 2002

Re: Hood alignment pins, Tommy Thompson, 21:23
Cam question at Triumph 2000 Web page, Don Malling, 21:16
TR6 buyer, Gene Holtzclaw, 21:03
Hood alignment pins, Gene Holtzclaw, 21:00
RE: Driving music, Jim Swarthout, 20:06
TR6 Hardtop, Jsut4fun, 19:59
Nice Day for A Ride in the TR6, Tommy Thompson, 19:11
RE: TR6 Radios, R. Ashford Little II, 19:09
Re: distributor shaft runout, Sally or Dick Taylor, 17:43
TOWBAR, sjklaassen, 17:39
RE: Designs, Jim Swarthout, 16:17
RE: distributor shaft runout, Jim Swarthout, 13:21
distributor shaft runout, Lumia, John, 12:54
Re: Vintage Triumph Racers at Mossport 2003, Robert M. Lang, 10:40
Vintage Triumph Racers at Mossport 2003, James Henningsen, 10:16
Re: Jump starting a 76 TR6, jay_welch, 06:03
Re: Jump starting a 76 TR6, James Henningsen, 05:54
RE: TR6 Ansa Exhaust, Ronald A. Dowty, 05:16
TR6 hard top, Ryan Miles, 02:46
Press Stickers, Nick Gemas, 00:04

December 26, 2002

TR6 Ansa Exhaust, Nick Gemas, 23:12
Oil cooler thermostat mounting., Jim Hurley, 18:46
Re: First Cross Country Trip (in the dead of winter), StangGuy67, 15:30
RE: E-Drawings, Jim Swarthout, 14:12
Re: Fw: uprated shock valves for tr6, Alan, 13:58
reply to your shock and spring questions - and other suspension, Ted Schumacher, 13:56
Re: Fw: uprated shock valves for tr6, Btp44, 13:54
Re: master cylinder, Alan, 13:48
Fw: uprated shock valves for tr6, Alan, 13:43
Re: Accelerator Pedal Question, Ted Schumacher, 12:59
RE: Refurbishing TR6 Gages, Hugh Fader, 12:55
Re: Refurbishing TR6 Gages, Richard Seaton, 12:49
Re: master cylinder, Doug Dwyer, 12:37
Accelerator Pedal Question, Acekraut11, 12:15
Refurbishing TR6 Gages, Hugh Fader, 11:39
master cylinder, Ozium8221, 11:12
RE: Raising the Car Height in the Rear, Robert M. Lang, 10:13
need TR inspector in UT, Lee Daniels, 09:27
RE: Raising the Car Height in the Rear, Vink, Graham, 09:16
Re: Raising the Car Height in the Rear, Robert M. Lang, 09:15
Re: Jump Starting a 76 TR6, Greg Perry, 09:10
Re: Raising the Car Height in the Rear, Robert M. Lang, 09:06
Re: "Over the diff" sway-bars, Robert M. Lang, 09:00
subject lines, Creamer, Mark, 08:56
(no subject), Ozium8221, 08:47
Re: Jump Starting a 76 TR6, jay_welch, 08:40
Jump Starting a 76 TR6, James Henningsen, 08:38
Raising the Car Height in the Rear, Robert L. Gannon, 08:33
"Over the diff" sway-bars, Shane Ingate, 08:28
No response from Gunst yet 12/26/02, Don Malling, 07:33
Used Cars - longgggggggg.....Could be LBC related, jay_welch, 06:50
Use of an engine stand, Walter Fogle, 05:45

December 25, 2002

Re: Newbie on board, Doug Dwyer, 21:55
Re: Newbie on board, Greg Perry, 18:50
Re:, Greg Perry, 18:50
Auto body flipper, mocharand5, 18:11
Re: Use of Engine Stand, Phil Parcells, 17:34
RE: Use of Engine Stand, Hugh Fader, 16:12
Newbie on board, Doug Dwyer, 16:00
Re: First Cross Country Trip (in the dead of winter), Gene Holtzclaw, 15:44
Re: First Cross Country Trip (in the dead of winter), Gary Fluke, 15:35
It's 34 degrees,, R. Ashford Little II, 14:29
Is a registered trademark of Friend Finder, tedtsimx, 13:06
Re: Use of Engine Stand, Sally or Dick Taylor, 13:04
Re: First Cross Country Trip (in the dead of winter), Mark Bullard, 12:07
Holiday Greetings, R. Ashford Little II, 11:51
RE: Oil pump porting, Jim Swarthout, 11:37
Re: Oil pump porting, Gary Fluke, 11:27
Use of Engine Stand, ShewFamily, 11:12
Oil pump porting, Mitchel Seff, 10:49
chrismas- when your single, Alan, 07:38

December 24, 2002

RE: A simple Web site for designs, Jim Swarthout, 21:30
Re:, Greg Perry, 21:23
RE: resurrection, Jim Swarthout, 21:14
Finder Network, Inc., tedtsimx, 18:56
TR6 Front Valance, Gene Holtzclaw, 18:50
TR6 Front Valance, Robert L. Gannon, 18:03
New site...Happy Holidays, LaJoMor, 17:06
Merry Christamas 6PK, mocharand5, 15:47
RE: TR6 Radios, R. Ashford Little II, 13:40
RE: Swar Bar Rubbers, Neil Beesley" (by way of Brian, 12:11
RE: TR6 Radios, Timothy Holbrook, 11:29
RE: TR6 Radios, R. Ashford Little II, 10:55
diff mount welding, Mark Riddle, 10:44
Please...can someone tell me how to get my name off of this, JCHDRDR, 10:29
Re: TR6 Radios, Bob Fabie, 10:25
NiceCards, elkhorn, 10:18
diverter valve, Lumia, John, 09:52
RE: Desktop Dyno, Robert M. Lang, 07:59

December 23, 2002

RE: rear bar, Mike Munson, 21:19
RE: over-steer, under-steer, neutral steer...thoughts,, Mike Munson, 21:10
RE: over-steer, under-steer, neutral steer...thoughts,, william.mcintire, 20:56
RE: over-steer, under-steer, neutral steer...thoughts,, Mike Munson, 20:51
RE: Desktop Dyno, Mike Munson, 20:30
RE: over-steer, under-steer, neutral steer...thoughts,, Jim Swarthout, 18:58
RE: Desktop Dyno, Jim Swarthout, 18:16
RE: rear bar, R. Ashford Little II, 17:55
RE: rear bar, Sally or Dick Taylor, 17:19
Desktop Dyno, Robert M. Lang, 15:45
Re: Sweet Triumph Sounds, Robert M. Lang, 15:17
Carb. synchronizing ?'s, Richard Seaton, 14:38
RE: over-steer, under-steer, neutral steer...thoughts,, Navarrette, Vance, 14:22
RE: over-steer, under-steer, neutral steer...thoughts,, Robert M. Lang, 13:21
RE: over-steer, under-steer, neutral steer...thoughts,, R. Ashford Little II, 12:49
RE: over-steer, under-steer, neutral steer...thoughts,, Simms, Bruce CIC, 12:39
Fuel overflow, YeOldEd, 12:17
RE: over-steer, under-steer, neutral steer...thoughts,, R. Ashford Little II, 11:36
RE: over-steer, under-steer, neutral steer...thoughts,, R. Ashford Little II, 11:34
RE: over-steer, under-steer, neutral steer...thoughts,, Timothy Holbrook, 11:17
RE: over-steer, under-steer, neutral steer...thoughts,, Navarrette, Vance, 11:02
Re: The Dying TR6 Swan, James Tabor, 10:49
RE: over-steer, under-steer, neutral steer...thoughts,, Neil Beesley, 10:46
Gunst Bearing -- no response from Gunst yet, Don Malling, 10:19
RE: New 6-Pack member coming your way, James Henningsen, 10:11
FW: over-steer, under-steer, neutral steer...thoughts,, Navarrette, Vance, 09:11
FW: New 6-Pack member coming your way, Navarrette, Vance, 09:10
Re: oversteer, understeer, neutral steer...thoughts, theories,, David Mahlmeister, 09:08
RE: oversteer, understeer, neutral steer...thoughts, theories,, Robert M. Lang, 09:02
Re: More about the GUN$T, Shane Ingate, 08:52
Re: oversteer, understeer, neutral steer...thoughts, theories,, Shane Ingate, 08:34
RE: New 6-Pack member coming your way, James Henningsen, 07:59
RE: New 6-Pack member coming your way, James Henningsen, 07:58
Re: The Dying TR6 Swan, Alan, 06:10
RE: Swar Bar Rubbers, Neil Beesley, 05:42
RE: over-steer, under-steer, neutral steer...thoughts,, Neil Beesley, 04:43
Tenuous LBC - Brooklands Racetrack, UK, jonmac, 01:57

December 22, 2002

Re: The Dying TR6 Swan, Sally or Dick Taylor, 23:43
Re: New 6-Pack member coming your way, Kevin Andrews, 23:00
Re: The Dying TR6 Swan, StangGuy67, 22:46
over-steer, under-steer, neutral steer...thoughts, theories,, R. Ashford Little II, 22:13
RE: The Dying TR6 Swan, R. Ashford Little II, 22:08
Re: oversteer, understeer, neutral steer...thoughts, theories,, Timothy Holbrook, 21:35
Re: Chrome Plating, Richard Seaton, 21:09
RE: Chrome Plating, Jim Swarthout, 20:42
Re: Chrome Plating, Richard Seaton, 20:34
Re: New 6-Pack member coming your way, Doug Hofer, 20:27
RE: The Dying TR6 Swan, Hugh Fader, 20:21
Re: oversteer, understeer, neutral steer...thoughts, theories,, Richard Seaton, 20:14
RE: oversteer, understeer, neutral steer...thoughts, theories,, Jim Swarthout, 20:03
RE: Chrome Plating, Jim Swarthout, 19:56
RE: oversteer, understeer, neutral steer...thoughts, theories,, Jim Swarthout, 19:22
Re: Clear Powder Coat and intake Manifold, mitch, 19:21
Re: Clear Powder Coat and intake Manifold, Alan, 19:16
RE: Clear Powder Coat and intake Manifold, Jim Swarthout, 19:06
New email, Trsx69, 18:55
Re: Brown flotsam in brake fluid, Richard Seaton, 18:41
RE: The Dying TR6 Swan, R. Ashford Little II, 16:03
RE: New 6-Pack member coming your way, James Henningsen, 16:02
RE: The Dying TR6 Swan, Hugh Fader, 15:48
Re: New 6-Pack member coming your way, Mark Riddle, 15:46
New 6-Pack member coming your way, James Henningsen, 15:26
RE: The Dying TR6 Swan, R. Ashford Little II, 15:25
Re: The Dying TR6 Swan, jay_welch, 15:14
Re: brake fluid, Greg Perry, 14:50
Re: brake fluid, Greg Perry, 14:45
Re: Clear Powder Coat and intake Manifold, Shane Ingate, 13:56
Re: Magic Clutch & more, Sally or Dick Taylor, 13:52
RE: The Dying TR6 Swan, Sally or Dick Taylor, 13:33
Brown flotsam in brake fluid, Keith Meinhold, 13:27
Re: Swar Bar Rubbers, Sally or Dick Taylor, 12:55
Parts,Parts and more Parts!, Dan H. Detweiler, 10:49
RE: Swar Bar Rubbers, Keith Meinhold, 10:37
Swar Bar Rubbers, Alan & Debbie Lindner, 10:12
Magic Clutch & more, R. Ashford Little II, 08:31
RE: The Dying TR6 Swan, R. Ashford Little II, 08:15
RE: oversteer, understeer, neutral steer...thoughts, theories,, Mike Munson, 03:38
Re: brake fluid, Gary Fluke, 01:08
Re: The Dying TR6 Swan, Sally or Dick Taylor, 00:48

December 21, 2002

Abarth exhaust, Nick Gemas, 22:51
Re: The Dying TR6 Swan, Alan, 21:33
RE: Clear Powder Coat and intake Manifold, R. Ashford Little II, 19:24
Clear Powder Coat and intake Manifold, Richard Seaton, 18:36
RE: oversteer, understeer, neutral steer...thoughts, theories,, Mike Munson, 16:49
RE: The Dying TR6 Swan, Jim Swarthout, 16:45
RE: The Dying TR6 Swan, Walt Philipson, 15:56
The Dying TR6 Swan, Grant Kester, 13:07
Gunst Bearing, Don Malling, 12:35
RE: Gunst Bearing, R. Ashford Little II, 10:47
Gunst Bearing, mkutka, 10:35
RE: Gas Weeping-Choke Control, Hugh Fader, 09:17
Gas Weeping-Choke Control, Bob Fabie, 08:57
Re: Fwd: Re: TRF magic clutch kit, jay_welch, 03:50

December 20, 2002

Re: Bonnet Not aligning Up, Tommy Thompson, 23:40
Gunst Bearing, Don Malling, 22:23
Re: Brake Pipes, Don Malling, 22:21
Re: Bonnet Not aligning Up, Sally or Dick Taylor, 20:49
Re: Bonnet Not aligning Up, Mark Riddle, 19:38
RE: The Dying TR6 Swan, Mike Munson, 17:17
Nelson's email address, R. Ashford Little II, 17:08
RE: hardtop rear window seal, Jim Davis, 17:07
Fwd: Re: TRF magic clutch kit, Timothy Holbrook, 15:26
RE: More about the GUN$T, Simms, Bruce CIC, 15:19
Re: (was) TRF magic clutch kit - Header Comments, Robert M. Lang, 14:56
Re: Gunst T/O bearing/sleeve, N2K9S2, 14:52
Re: Triumph Sounds, Robert M. Lang, 14:37
Re: TRF magic clutch kit, Seth Glassman, 14:32
RE: More about the GUN$T, Mark Hooper, 13:33
More about the GUN$T, Sally or Dick Taylor, 13:00
Re: Joyous Triumph Sounds, Robert M. Lang, 12:26
hardtop rear window seal, Tom Lofgren, 12:21
RE: Joyous Triumph Sounds, Creamer, Mark, 12:15
Joyous Triumph Sounds, Robert M. Lang, 12:08
Re: TRF magic clutch kit, jay_welch, 12:04
RE: TRF magic clutch kit, Pappin,Ian, 11:43
Re: Gunst T/O bearing/sleeve, RPVanLuchene, 11:39
Re: TRF magic clutch kit, Alan, 11:16
Re: Fwd: RE: TRF magic clutch kit, Robert M. Lang, 08:26
Re: brake fluid, Greg Perry, 08:06
Fw: TRF magic clutch kit, Richard Seaton, 06:41
Re: Bonnet Not aligning Up, Bob Fabie, 06:00
Re: Brake Pipes, Alan, 05:51
Bonnet Not aligning Up, Tommy Thompson, 04:56
Re: Gunst T/O bearing/sleeve, Sally or Dick Taylor, 00:48
Re: Gunst T/O bearing/sleeve, Sally or Dick Taylor, 00:44

December 19, 2002

Re: brake fluid, Gary Fluke, 23:48
Re: TRF magic clutch kit, Don Malling, 20:54
Re: TRF magic clutch kit, David Friedlander, 20:44
Re: TRF magic clutch kit, Don Malling, 20:19
Brake Pipes, Don Malling, 20:02
RE: RE: TRF magic clutch kit, Jim Swarthout, 19:36
Farmall clutches, N2K9S2, 19:16
Re: brake fluid, Alan, 19:15
Fwd: RE: TRF magic clutch kit, Timothy Holbrook, 19:14
Fwd: RE: TRF magic clutch kit, Timothy Holbrook, 19:06
RE: TRF magic clutch kit, Jim Swarthout, 19:03
RE: TRF magic clutch kit, Jim Swarthout, 18:45
Re: brake fluid, Jadewey211, 18:06
Re: brake fluid, Robert L. Gannon, 18:03
Re: brake fluid, Greg Perry, 17:56
brake fluid, Ozium8221, 16:39
RE: TRF magic clutch kit, Mark Hooper, 16:16
Re: TRF magic clutch kit, Robert L. Gannon, 16:11
RE: TRF magic clutch kit, Navarrette, Vance, 15:27
Tower Paint, Navarrette, Vance, 14:32
RE: TRF magic clutch kit, Mark Hooper, 13:51
Re: Dash lights color?, Bill Bereza, 09:05
Re: Installing new brake lines on TR250, Robert M. Lang, 08:56
(no subject), Megasysint, 05:10
Re: KOYO/Sachs clutch kit, Sally or Dick Taylor, 00:42

December 18, 2002

Re: KOYO/Sachs clutch kit, Greg Perry, 23:08
Re: KOYO/Sachs clutch kit, Don Malling, 21:45
RE: TRF magic clutch kit, Jim Swarthout, 21:41
Re: KOYO/Sachs clutch kit, RPVanLuchene, 18:42
Re: Installing new brake lines on TR250, Don Malling, 18:38
tr250, Patrick Myers, 18:08
Re: TRF magic clutch kit, Sally or Dick Taylor, 17:41
RE: Farmall clutches, Mike Munson, 16:56
Re: Installing new brake lines on TR250, Robert M. Lang, 14:54
Re: Pilot bush update & trans conversion, GSFuqua1, 14:43
Re: Repoduction chassis?, GSFuqua1, 13:44
Re: TRF magic clutch kit/dash bulbs, RPVanLuchene, 13:28
Re: Installing new brake lines on TR250, James Tabor, 10:50
Re: Installing new brake lines on TR250, jay_welch, 07:08
Re: Fwd: Re: Pilot bush update & trans conversion, william mcintire, 07:06
Re: Trans Conversion, Greg Perry, 06:55
Re: Installing new brake lines on TR250, Greg Perry, 06:30
Re: Installing new brake lines on TR250, Alan, 06:02
RE: shocks, Sean F. Connolly, 00:40

December 17, 2002

Installing new brake lines on TR250, Don Malling, 22:30
Re: TRF magic clutch kit, jack williams, 21:44
Re: TRF magic clutch kit, Don Malling, 21:32
Re: lever shock, shock link, Greg Perry, 20:27
RE: TRF magic clutch kit, Gary R., 19:39
Fwd: Headers, Timothy Holbrook, 19:30
Fwd: shocks, Timothy Holbrook, 19:27
Fwd: Re: Pilot bush update & trans conversion, Sally or Dick Taylor, 17:01
shocks, Bernie, 16:25
RE: lever shock, shock link, Vink, Graham, 16:11
RE: TRF magic clutch kit, Jim Davis, 15:58
lever shock, shock link, Alan, 15:20
RE: Dash light colour, James Tabor, 15:10
TR6 road speed and RPM, was Pilot bush update & trans, Irv Korey, 14:48
Re: warm, but not sunny (was no subject), StangGuy67, 07:58
Re: Fw: Pilot bush update & trans conversion, william mcintire, 07:25
Re: TRF magic clutch kit, Fred Dieterich, 07:11
Re: TRF magic clutch kit, Sally or Dick Taylor, 01:00
Steering rack question, Sally or Dick Taylor, 00:31

December 16, 2002

Re: Pilot bush update & trans conversion, Gary Fluke, 21:41
Re: Fw: Pilot bush update & trans conversion, Greg Perry, 21:26
Fw: Pilot bush update & trans conversion, John Reynolds, 20:48
Re:, Alan, 20:11
TRF magic clutch kit, SamuelsMA, 19:58
Re: Pilot bush update & trans conversion, Robert L. Gannon, 19:50
Pilot bush update & trans conversion, John Reynolds, 19:24
Dash light color, Fred Dieterich, 18:37
Dash light color, Richard Seaton, 18:17
Re: Dash Lights, Richard Seaton, 18:11
Dash Lights, YeOldEd, 17:30
RE: Dash lights color, R. Ashford Little II, 17:02
RE: Dash light colour, Larry Alt, 17:00
RE: PI on 5 cylinders (rough running on start up), Neil Beesley, 16:47
Re: Troubleshooting Speedometer, Doug Hofer, 16:17
Re: Dash light colour, Mark Riddle, 16:14
Re: Troubleshooting Speedometer, Sally or Dick Taylor, 16:12
PI on 5 cylinders (rough running on start up), Fred Dieterich, 16:00
PI on 5 cylinders (rough running on start up), Glen Johnson, 15:59
RE: Dash light colour, R. Ashford Little II, 15:29
Headers, Seth Glassman, 15:19
RE: Dash light colour, Robert M. Lang, 15:14
Re: Repoduction chassis?, John Hauser, 15:11
RE: Dash lights color?, Robert M. Lang, 15:11
RE: Dash lights color?, Bernard Robbins, 15:07
RE: Dash lights color?, R. Ashford Little II, 14:55
RE: Dash lights color?, Mark Hooper, 14:54
RE: Dash light colour, R. Ashford Little II, 14:51
RE: Dash lights color?, Tommy Thompson, 14:27
Dash light colour, Terry Geiger, 14:26
RE: Dash lights color?, Creamer, Mark, 13:49
Re: Dash lights color?, william mcintire, 13:43
Dash lights color?, R. Ashford Little II, 12:56
RE: Reality Check, Vink, Graham, 12:27
RE: Repoduction chassis?, R. Ashford Little II, 12:25
Troubleshooting Speedometer, T.J.Boesken, 11:44
Reality Check, Jim Farris, 11:39
RE: Repoduction chassis?, Shane Ingate, 11:21
RE: Reality Check, Andrew Packard, 10:30
Re: Reality Check, Todd Bermudez, 10:09
RE: Repoduction chassis?, R. Ashford Little II, 07:41
Re: Repoduction chassis?, Tom Di Iulio, 06:46

December 15, 2002

Repoduction chassis?, Ronald A. Dowty, 23:51
RE: PI on 5 Cylinders, McMaster, John, 16:10
RE: PI on 5 cylinders, again!, Bernard Robbins, 14:09
Re: PI on 5 cylinders, again, jonmac, 13:50
Re: PI on 5 cylinders, again!, SamuelsMA, 13:41
It's not winter yet!, Andrew Packard, 11:42
PI on 5 cylinders, again!, Derek Graham, 09:03
Re: slightly OT: 4A frame, Don Malling, 07:33

December 14, 2002

Re: PI on 5 cylinders, again!, Sally or Dick Taylor, 17:08
RE: TR250 front suspension, Andrew Packard, 16:57
slightly OT: 4A frame, Phil Parcells, 16:49
RE: PI on 5 cylinders, again!, Hugh Fader, 16:46
RE: TR250 front suspension, Jim Swarthout, 16:30
RE: PI on 5 cylinders, again!, Jim Swarthout, 16:17
RE: PI on 5 cylinders, again!, Stephen Hanselman, 15:40
TR250 front suspension, Leroy Jack Schmelyun Jr, 15:18
RE: rusty intake, Jim Swarthout, 15:05
Re: TR250 front suspension, Sally or Dick Taylor, 15:00
rusty intake, Lizirbydavis, 13:59
Re: PI on 5 cylinders, again!, Theodore R. Stevens, 09:30
PI on 5 cylinders, again!, SamuelsMA, 07:11

December 13, 2002

rebuilt transmissions, Don Malling, 23:11
Re: OD emblem, Tom Di Iulio, 22:09
Re: Differential ratio's different for OD?, Greg Perry, 21:39
Differential ratio's different for OD?, Ronald A. Dowty, 21:13
OD emblem, Gene Holtzclaw, 20:56
Re: I am looking at the posts, responses coming!, YeOldEd, 10:45
Re: TR6 Gearshift Lever Locating Pins, Richard Seaton, 06:32
TR6 Gearshift Lever Locating Pins, Hugh Fader, 05:57

December 12, 2002

RE: I am looking at the posts, responses coming!, Mark Hooper, 18:50
misfiring after sustained highway speeds solved, Peter Beyl, 18:18
Front Turn signal swap??, Richard Seaton, 18:14
RE: I am looking at the posts, responses coming!, Jim Swarthout, 17:40
RE: TR6 tail lights, Jim Swarthout, 16:52
RE: TR6 tail lights, Vink, Graham, 10:30

December 11, 2002

Re: TR6 tail lights, Bill Bereza, 22:23
RE: TR6 tail lights, R. Ashford Little II, 16:33
TR6 tail lights, LaJoMor, 15:14
Boot Lock Part, ChuckC4000, 10:02
Re: Fwd: Re: Which overdrive A or J?, Todd Bermudez, 04:24

December 10, 2002

Re: 30 degree valve seats and 3 angle valve grid, Don Malling, 20:13
Re: Fwd: Re: Which overdrive A or J?, Timothy Holbrook, 18:51
RE: EGR Valve function, Hugh Fader, 18:05
EGR Valve function, Chuck Arnold, 15:15
Soft top frame, YeOldEd, 12:06
30 degree valve seats and 3 angle valve grid, Navarrette, Vance, 11:44
Follow-up on differential seal replacement, Peter Macholdt, 09:37
RE: GM Alternator Update(longish), Pappin,Ian, 09:17
Re: Not him again... (preload), Michael Lupynec, 07:44
Re: Convertible top frame, william mcintire, 07:09

December 09, 2002

Re: Which overdrive A or J?, Tom Di Iulio, 22:48
Re: other groups, Tom Di Iulio, 22:31
Re: Which overdrive A or J?, Irv Korey, 21:09
other groups, Mark Bullard, 21:09
GM Alternator Update(longish), Acekraut11, 21:02
Convertible top frame, SamuelsMA, 20:51
Re: Fwd: Re: Fwd: RE: 30 degree valve seats and 3 angle valve, Don Malling, 20:24
Re: Fwd: RE: 30 degree valve seats and 3 angle valve grid, Don Malling, 20:04
Fwd: Re: Fwd: RE: 30 degree valve seats and 3 angle valve grid, Timothy Holbrook, 19:17
Fwd: Re: Which overdrive A or J?, Timothy Holbrook, 19:10
Fwd: Not him again... (preload), Timothy Holbrook, 19:05
Re: Which overdrive A or J?, Don Malling, 19:04
Not him again... (preload), Ronald A. Dowty, 17:51
Re: Fwd: RE: 30 degree valve seats and 3 angle valve grid, William Whitmoyer, 14:50
Fwd: RE: 30 degree valve seats and 3 angle valve grid, William Whitmoyer, 14:25
Lower wishbone bracket torqing, Ronald A. Dowty, 12:39
Front brake questions, Ronald A. Dowty, 12:34
Late model transmission brackets, Ronald A. Dowty, 10:18
GT6 Muffler, steve bridge, 09:52
Re: Which overdrive A or J?, StangGuy67, 09:06
RE: Which overdrive A or J?, Todd Bermudez, 07:54
RE: Which overdrive A or J?, Ronald A. Dowty, 07:31
Re: Which overdrive A or J?, Tom Di Iulio, 07:22
Re: Which overdrive A or J?, Todd Bermudez, 04:23
Which overdrive A or J?, Ronald A. Dowty, 03:00

December 08, 2002

Re: Leaking Carbs, Sally or Dick Taylor, 20:58
Re: Muffler and crank breather question., Chuck Arnold, 20:45
Upper Front Suspension question, Andrew Packard, 20:04
Re: Leaking Carbs, Greg Perry, 19:28
Re: Leaking Carbs, Richard Seaton, 19:09
RE: Road & Track @ Peter Egan, R. Ashford Little II, 18:36
Re: Driving comfort, Gary Fluke, 18:25
Leaking Carbs, Fred Dieterich, 16:38
Re: Driving comfort, Btp44, 15:49
RE: Driving comfort, R. Ashford Little II, 15:02
Re: Driving comfort, Gary Fluke, 14:34
Another brand of thread inserts-Trailing arm studs etc., LaJoMor, 12:10
RE: Driving comfort, R. Ashford Little II, 11:48
Re: Driving comfort, Richard Seaton, 08:24
Re: Driving comfort, Vsnively, 07:32
Re: Driving comfort, Gary Fluke, 01:35
RE: Differential, Peter Zaborski, 01:03
RE: Driving comfort, Keith Meinhold, 01:00

December 07, 2002

RE: Differential, Brooks Bullock, 22:43
Re: Driving comfort, Mark Bullard, 22:17
Re: Fwd: RE: 30 degree valve seats and 3 angle valve grid, Don Malling, 16:45
Re: Driving comfort, Richard Seaton, 16:01
RE: Driving comfort, R. Ashford Little II, 14:12
RE: Driving comfort, R. Ashford Little II, 10:58
Early Model Alternator Pulley 3/8 inch, James Henningsen, 09:59
Re: Performance TR6's, Richard Seaton, 08:23
Re: Plug welding hole size, Richard Seaton, 08:22
Plug welding hole size, Ronald A. Dowty, 06:21
Re: rotor resurfacing (Cincy), Ted Schumacher, 06:18
Hose Kit, mocharand5, 06:12
Driving comfort, Paula J. Graffam, 06:04
Re: Performance TR6's, Jadewey211, 05:29
RE: TR6 Performance, Jim Davis, 04:55

December 06, 2002

RE: Performance TR6's, Shane Ingate, 22:04
Re: Kastner's Triumph Vitesse, Kai M. Radicke, 22:01
RE: TR6 Performance, Jim Hurley, 20:43
Vitesse, YeOldEd, 18:29
Kastner's Triumph Vitesse, Kai M. Radicke, 18:15
Re: PCV on a Good's Triple intake?'s, Sally or Dick Taylor, 17:52
Fwd: RE: 30 degree valve seats and 3 angle valve grid, Timothy Holbrook, 17:37
Fwd: Re: Fwd: RE: RE: PCV on a Good's Triple intake?'s, Timothy Holbrook, 17:25
Re: Cool air intake for carbs., Sally or Dick Taylor, 17:19
Re: Differential, Btp44, 15:40
Re: Differential, Robert M. Lang, 14:04
Re: Differential, twgeiger, 13:58
Re: Differential, David J Stauffacher, 13:51
Re: Vents and air boxes, Btp44, 13:44
Re: Differential, Robert M. Lang, 13:35
lever arm shocks, Alan, 12:20
Re: Differential, Btp44, 12:19
Re: Vents and air boxes, Chuck Arnold, 12:09
Re: Performance TR6's, Robert M. Lang, 11:20
Re: Non LBC auto transport?, Phil Parcells, 11:17
Re: Differential, Robert M. Lang, 10:52
Re: Performance TR6's, Robert M. Lang, 10:14
Re: Fwd: RE: RE: PCV on a Good's Triple intake?'s, Robert M. Lang, 10:08
rotor resurfacing (Cincy), Creamer, Mark, 08:48
RE: RE: RE: PCV on a Good's Triple intake?'s, Stephen Hanselman, 08:44
RE: 30 degree valve seats and 3 angle valve grid, William Whitmoyer, 08:34
RE: Cool air intake for carbs., william.mcintire, 08:22
RE: Non LBC auto transport?, Vink, Graham, 07:33
RE: OT: mysterious electrical problem, Hugh Fader, 06:56
Re: OT: mysterious electrical problem, Phil Parcells, 06:31
RE: RE: RE: PCV on a Good's Triple intake?'s, Hugh Fader, 06:22
Re: mysterious electrical problem, William Maslin, 05:56
Re: Performance TR6's, Mitchel Seff, 04:59

December 05, 2002

RE:differentiaL, Btp44, 22:02
cool air, Alan, 22:00
Re: Performance TR6's, Richard Seaton, 21:30
RE: Performance TR6's, Jim Swarthout, 21:06
Re: Group Hug (was TR-6 Performance (Final list) Short!), Richard Seaton, 21:04
Re: Differential, Richard Seaton, 21:02
RE: RE: RE: PCV on a Good's Triple intake?'s, Jim Swarthout, 20:47
Re: RE: PCV on a Good's Triple intake?'s, Richard Seaton, 20:41
Re: Performance TR6's, Phil Parcells, 20:40
RE: RE: RE: PCV on a Good's Triple intake?'s, R. Ashford Little II, 20:35
Performance TR6's, MJSUKEY, 20:21
RE: Group Hug (was TR-6 Performance (Final list) Short!), Jim Swarthout, 19:54
Fwd: RE: RE: PCV on a Good's Triple intake?'s, Timothy Holbrook, 19:51
Re: Non LBC auto transport?, Phil Parcells, 19:38
Group Hug (was TR-6 Performance (Final list) Short!), Hugh Fader, 19:31
Non LBC auto transport?, RangerCRS, 19:01
Differential, Peter Macholdt, 18:48
Re: mysterious electrical problem, Greg Perry, 18:21
RE: RE: PCV on a Good's Triple intake?'s, Todd Bermudez, 18:16
Re: U-Joints & Bearings, Richard Seaton, 17:30
RE: RE: PCV on a Good's Triple intake?'s, Jim Swarthout, 16:44
RE: Cool air intake for carbs., R. Ashford Little II, 16:40
RE: U-Joints & Bearings, Stephen Hanselman, 16:11
RE: mysterious electrical problem, Stephen Hanselman, 15:46
Fwd: RE: PCV on a Good's Triple intake?'s, Timothy Holbrook, 15:44
Re: Cool air intake for carbs., Robert L. Gannon, 15:40
Fwd: Cool air intake for carbs., Timothy Holbrook, 15:28
Re: Partial removal from list, Richard Seaton, 14:57
RE: PCV on a Good's Triple intake?'s, Jim Swarthout, 14:49
PCV on a Good's Triple intake?'s, Richard Seaton, 14:37
Re: Not an engineer!, Jadewey211, 14:36
RE: Cool air intake for carbs., Jim Swarthout, 14:35
Re: Cool air intake for carbs., Robert M. Lang, 14:33
RE: RPM results, Jim Swarthout, 14:15
Cool air intake for carbs., Richard Seaton, 14:00
RE: RPM results, Cregg Cowan, 13:39
RE: RPM results, Jim Swarthout, 12:56
RE: TR-6 Performance (Final list) Short!, Jim Swarthout, 11:53
mysterious electrical problem, Vink, Graham, 11:25
RE: RPM results, Simms, Bruce CIC, 11:23
RPM results, Cregg Cowan, 11:02
Re: Not an engineer!, Robert M. Lang, 10:51
Re: Not an engineer!, Jadewey211, 10:39
Not an engineer!, YeOldEd, 10:09
Re: Fwd: Re: TR-6 performance (Q&A), jay_welch, 09:41
Fwd: Re: TR-6 performance (Q&A), Timothy Holbrook, 09:21
Re: TR250 Valve lift and Rocker ratio lift vs cam lift, Shane Ingate, 09:00
Re: Re:TR6 performance (current list), Michael Lupynec, 08:50
RE: 30 degree valve seats and 3 angle valve grid, Navarrette, Vance, 08:49
Re: Autozone Distributors/Distributor Rebuilds, Michael Lupynec, 08:01
Spin-On, Tommy Thompson, 06:12
Re: Partial removal from list, Mitchel Seff, 05:43
Re:TR6 performance (current list), Ryan Miles, 03:01
#4) Why will roller rockers of an equal ratio open the valves, Marc Nederkoorn, 02:41

December 04, 2002

Re: Autozone Distributors/Distributor Rebuilds, Greg Perry, 22:31
RE: Partial removal from list, Andrew Packard, 22:20
TR250 Valve lift and Rocker ratio lift vs cam lift, Don Malling, 22:03
RE: TR-6 performance (Q&A), Jim Swarthout, 20:41
Re: 30 degree valve seats and 3 angle valve grid, Don Malling, 20:36
RE: Partial removal from list, Jim Swarthout, 20:34
Re: TR-6 performance (Q&A), Don Malling, 20:28
Partial removal from list, Paula J. Graffam, 19:36
recent list activity - from list coordinator, Mike, 19:09
Fwd: RE: RE: TR-6 performance (Q&A), Timothy Holbrook, 18:17
Re: TR-6 Performance (current list), Berzins Family, 17:55
partial removal from list, Drew Palavage, 17:42
RE: ??? what's this, Mike Munson, 17:33
RE: TR-6 Performance (current list), Jim Swarthout, 17:30
RE: Spin-On Oil Filter, jonmac, 16:45
Re: ??? what's this, Shane Ingate, 16:03
Re: ??? what's this, William Maslin, 15:57
U-Joints & Bearings, Barlow, Paul, 15:57
Re: Spin-On Oil Filter, Robert M. Lang, 15:50
RE: Canuck Boys, Pappin,Ian, 15:44
RE: TR-6 Performance (current list), Jim Swarthout, 15:15
RE: RE: TR-6 performance (Q&A), Jim Swarthout, 14:53
RE: TR-6 Performance (current list), Jim Swarthout, 14:30
RE: TR-6 Performance (current list), R. Ashford Little II, 14:09
Re: Spin-On Oil Filter, orthen, 14:01
TR-6 Performance (current list), Jim Swarthout, 13:40
Re: RE: TR-6 performance (Q&A), Nathaniel Steiner, 13:35
Re: ??? what's this, Shawn Loseke, 13:21
Re: Spin-On Oil Filter, jonmac, 13:07
RE: Roller Rocker Performance Question, Navarrette, Vance, 12:53
Re: ??? what's this, Robert M. Lang, 11:23
RE: Ok, now what's this one?, R. Ashford Little II, 11:04
RE: Ok, now what`s this one?, R. Ashford Little II, 11:01
Re: Ok, now what`s this one?, Harold M. Morton, 10:34
RE: Sloppy Steering and Steering Rack Boots, Dwayne Cooper, 10:19
Re: Ok, now what's this one?, Dale, 10:16
Re: Ok, now what's this one?, Todd Bermudez, 10:07
Re: ??? what's this, Mitchel Seff, 10:05
Ok, now what's this one?, Ronald A. Dowty, 09:46
??? what's this, Ronald A. Dowty, 09:39
RE: 30 degree valve seats and 3 angle valve grid, Navarrette, Vance, 09:14
RE: Distributorless Ignition Project, Erik Quackenbush, 09:07
RE: RE: TR-6 performance (Q&A), Robert M. Lang, 08:38
Roller Rocker Performance Question, michael lunsford, 07:38
Re: TR-6 performance (Q&A), Mitchel Seff, 07:34
Re: RE: TR-6 performance (update), Richard Seaton, 06:26
RE: Zebra Striped Car, James Henningsen, 05:10
Re: TR-6 performance (Q&A), Mitchel Seff, 05:10
Door repairs, Richard Cottingham, 05:07
Distributorless Ignition Project, Kendall Larsen, 01:41

December 03, 2002

RE: RE: TR-6 performance (Q&A), Jim Swarthout, 23:55
RE: 30 degree valve seats and 3 angle valve grid, Jim Swarthout, 23:45
Re: Spin-On Oil Filter, Don Malling, 23:40
30 degree valve seats and 3 angle valve grid, Don Malling, 23:08
RE: RE: TR-6 performance (update), Jim Swarthout, 22:52
Re: A question for the readers at 6Pack, Don Malling, 22:19
RE: Autozone Distributors/Distributor Rebuilds, Jim Swarthout, 21:12
Re: Autozone Distributors/Distributor Rebuilds, Bob Fabie, 20:44
Re: Spin-On Oil Filter, David Friedlander, 19:42
Zebra Striped TR6, Richard Seaton, 19:35
Re: Spin-On Oil Filter, twgeiger, 19:32
Re: RE: TR-6 performance (update), Richard Seaton, 19:23
Re: New atitudes, Nick Gemas, 18:54
Spin-On Oil Filter, Tommy Thompson, 18:44
RE: TR-6 performance (update), Jim Swarthout, 18:15
Re: Please unsubscribe me, Robert L. Gannon, 18:13
Please unsubscribe me, Don McGilvery, 18:10
SE VTR, Alan, 18:02
Attitude, YeOldEd, 17:56
RE: RE: TR-6 performance (update), Jim Swarthout, 17:26
Re: Fwd: RE: TR-6 performance (update), Bill Bereza, 17:24
Re: 70-72 hubcaps on '69 TR6 wheels--lug nuts, Doug Hofer, 17:00
Fwd: RE: TR-6 performance (update), Timothy Holbrook, 16:50
RE: TR-6 performance (update), Jim Swarthout, 16:18
RE: TR-6 performance (update), Jim Swarthout, 16:15
RE: TR-6 performance (update), Jim Swarthout, 16:09
FW: TR-6 performance (update), Erik Quackenbush, 16:08
Re: Great Pics!, Shane Ingate, 16:08
Re: TR-6 performance, Alan, 15:56
RE: TR-6 performance (update), Erik Quackenbush, 15:55
Re: Autozone Distributors/Distributor Rebuilds, Bernie, 15:53
Richard from Halifax or any other Canuck, Pappin,Ian, 15:51
Re: Great pics!, Robert M. Lang, 15:50
Re: New atitudes, Nick Gemas, 15:32
RE: Great pics!, Mark Hooper, 15:26
Re: Great pics!, Peter Macholdt, 15:11
Re: TR6 performance, jonmac, 15:03
Re: Autozone Distributors/Distributor Rebuilds, Alan, 14:53
Re: Great pics!, Robert M. Lang, 14:25
Re: Great pics!, Robert M. Lang, 14:19
Seat runners, sjklaassen, 14:16
RE: Autozone Distributors/Distributor Rebuilds, Creamer, Mark, 14:13
Re: Great pics!, Gary Fluke, 14:12
RE: TR-6 performance (update), Jim Swarthout, 14:11
Re: Cool air intake, Shane Ingate, 13:49
Re: New atitudes, Richard Seaton, 13:44
Re: A question for the readers at 6Pack, Shane Ingate, 13:32
RE: Autozone Distributors/Distributor Rebuilds, Vink, Graham, 13:26
Re: Great pics!, Shane Ingate, 13:21
RE: Autozone Distributors/Distributor Rebuilds, Creamer, Mark, 12:59
Autozone Distributors/Distributor Rebuilds, Brian Borgstede, 12:57
Autozone Distributors/Distributor Rebuilds, William Maslin, 12:49
RE: Seat runners, Navarrette, Vance, 11:26
Re: rattling windows, James Franks, 11:20
RE: 70-72 hubcaps on '69 TR6 wheels--lug nuts, Vink, Graham, 10:39
Re: TR6 performance, Gary Fluke, 10:39
70-72 hubcaps on '69 TR6 wheels--lug nuts, Walter Fogle, 10:14
RE: rattling windows, Keith Meinhold, 09:01
Re: TR6 PI, David J Stauffacher, 08:38
Re: A question for the readers at 6Pack, Tom Di Iulio, 08:17
Re: A question for the readers at 6Pack, James Franks, 08:10
Re: New atitudes, James Franks, 07:05
Re: A question for the readers at 6Pack, Richard Cottingham, 05:56
Re: New atitudes, Richard Cottingham, 05:42
Re: rattling windows, Michael Altomare, 03:44
Great pics!, Gary Fluke, 00:04

December 02, 2002

rattling windows, Alan & Debbie Lindner, 22:21
Cool air intake, Alan & Debbie Lindner, 22:21
Fw: Drive shaft, James Franks, 22:09
Rimflow valves, Don Malling, 22:00
RE: New atitudes, Jim Swarthout, 21:02
RE: TR6 performance, Jim Swarthout, 20:01
New atitudes, mocharand5, 18:42
TR6 PI, McMaster, John, 18:20
Fwd: Re: Fwd: Re: Drive Shaft, Timothy Holbrook, 18:17
TR6 performance, lizirbydavis, 17:56
Re: TR6 PI, Sally or Dick Taylor, 16:57
RE: TR6 Performance, Jim Swarthout, 16:18
A question for the readers at 6Pack, Mike Brandon, 15:57
RE: Answers to TR6 questions (Very long), Navarrette, Vance, 15:28
Re: TR6 PI, Robert M. Lang, 15:12
TR6 Performance, JRURHH, 15:05
Re: TR6 PI, StangGuy67, 14:53
Re: TR6 PI, Erik Quackenbush, 14:11
Re: Drive shaft, Richard Seaton, 14:06
Re: TR6 PI, David J Stauffacher, 13:31
Re: Answers to TR6 questions, RangerCRS, 11:52
RE: Drive shaft, Robert M. Lang, 10:50
Re: Answers to TR6 questions, Richard Cottingham, 10:50
2003 International Triumph Challenge, Henry Frye, 10:42
RE: Answers to TR6 questions, Stephen Hanselman, 10:39
RE: Drive shaft, Stephen Hanselman, 10:35
Re: Fwd: Re: Drive Shaft, Robert M. Lang, 10:00
Re: TR6 PI, Erik Quackenbush, 09:58
Re: Nitrous, supercharged?, Erik Quackenbush, 09:19
Re: Damper pulley alignment, Erik Quackenbush, 09:12
RE: dash lights update, Stephen Hanselman, 09:05
Answers to TR6 questions, Shane Ingate, 08:24
Re: dash lights update, Shane Ingate, 07:31
Re: Road Trip, Blake Discher, 07:30
Road Trip, michael lunsford, 06:54
TR6 Perfomance, Paula J. Graffam, 06:01
Re: Drive shaft, jay_welch, 05:58
Drive shaft, Robert L. Gannon, 05:22

December 01, 2002

Electric Fan Conversion, Rick, 22:39
The differential an dhalf shafts., Steve Hanselman, 22:27
Re: TR-6 performance, Kai M. Radicke, 22:11
RE: Re: Drive Shaft, Mark Hooper, 21:07
RE: TR-6 performance, Jim Swarthout, 20:45
Fwd: Re: Drive Shaft, Timothy Holbrook, 20:23
Re: Drive Shaft, Robert M. Lang, 18:26
Another Bond/Triumph Connection, Hugh Fader, 17:40
Re: Who's driving today?, Richard Seaton, 15:24
Re: TR6 PI, StangGuy67, 15:12
RE: 5 cylinders, Bernard Robbins, 14:03
RE: Who's driving today?, R. Ashford Little II, 13:56
Reverse Lights fixed (was Circle-X on a schematic), Hugh Fader, 13:53
RE: 5 cylinders, Hugh Fader, 13:44
Re: Who's driving today?, Phil Parcells, 13:09
5 cylinders, SamuelsMA, 13:08
RE: Who's driving today?, Keith Meinhold, 12:46
Re:TR6 Performance, Nick Gemas, 12:06
TR6 rear shock links, Greg Perry, 12:04
RE: TR-6 performance, Patrick Bitton, 11:16
Carburator Adjustment, Glenn Rierson, 10:13
Re: Re:TR6 Performance, Michael Lupynec, 08:56
Re: TR6 PI, Michael Lupynec, 08:42
RE: TR-6 performance, Hugh Fader, 08:41
RE: TR6 PI, R. Ashford Little II, 08:33
Who's driving today?, R. Ashford Little II, 08:18
Re: TR-6 performance, James Franks, 07:20
RE: TR-6 performance, Steve Hanselman, 05:19
TR-6 Performance, Paula J. Graffam, 05:14
Re: TR-6 performance, Gary Fluke, 00:53