Spridgets (date)

June 30, 1998

Higher flow water pumps..., Joerger, 23:05
Hello, jmccraw, 22:30
Re: A(nother) question regarding tonneaus, Richard L. Bergstrom, 22:13
Looking for a Bugeye in or near California., Herold Faulkner, 21:17
Steering Wheels, Valentine, 18:06
Re: Rear Axel Oil Seal andBrakes, Jeff Sharpe, 16:11
The end is in sight!!!, Tyson Sherman, 16:05
Re: Rear Axel Oil Seal andBrakes, Mike Gigante, 15:48
Re: "Funny" Leaf Springs, Mike Gigante, 15:44
Re: info on prototype sprite, Leo Speichinger, 15:27
Re: info on prototype sprite, Leo Speichinger, 15:27
Re: "Funny" Leaf Springs, Frank Clarici, 15:14
RE: info on prototype sprite, Gary Speckman, 15:11
Re: AH Spares, Frank Clarici, 15:11
RE: info on prototype sprite, Ulix Goettsch, 14:53
RE: info on prototype sprite, Daniel Thompson, 11:52
RE: Bugeye wheels & tyres..., Chris Kotting, 10:53
Re: A question regarding tonneaus, GMari58175, 10:37
Re: Bugeye side curtains, Dave Woerpel, 10:09
Re: Updated light bulbs, Peter, 10:00
Re: Rear Axel Oil Seal andBrakes, Ulix Goettsch, 09:37
Re: Bugeye wheels & tyres..., Ulix Goettsch, 09:28
Re: Bugeye side curtains, shk, 09:28
Re: Updated light bulbs, shk, 09:20
Re: SU Carb -- Float Leaking, Curtis Carlson, 07:52
Distributer noise, John Colosimo, 06:51
Re: Money exchange, Editors, Molecular Vision, 06:47
Re: Funny leaf springs, Peter Samaroo, 06:28
Re: Money exchange, Andy Poling, 04:38
Re: Rear Axel Oil Seal andBrakes, Trevor Boicey, 00:37
A question regarding tonneaus, Packy Coleman, 00:35

June 29, 1998

Re: Money exchange, Larry and Sandi Miller, 22:58
Re: Bugeye side curtains, Frmjr45, 22:50
Re: Bowie, MD trip (rather verbose), Jeff Church, 22:35
Money exchange, Valentine, 22:34
RE: Riviera Blue, Doug Ingram, 22:26
Rear Axel Oil Seal andBrakes, Greg MAHNEY, 22:22
Re: Riviera Blue, GMari58175, 22:16
"Funny" Leaf Springs, Greg MAHNEY, 22:07
AH Spares, Larry and Sandi Miller, 21:54
Re: Bugeye side curtains, Pete & Caroline Phillips, 21:06
Re: Updated light bulbs, Greg MAHNEY, 20:56
Re: Updated light bulbs, Frank Clarici, 20:16
Re: SU Carb -- Float Leaking, Frank Clarici, 20:11
Re: Starting a local club, Frank Clarici, 20:08
Re: Bugeye wheels & tyres..., Frank Clarici, 19:49
Re: Pertronix, was: 73 MGB, rickb, 19:45
Re: Bugeye side curtains, Frank Clarici, 19:45
Re: Bowie, MD trip, Frank Clarici, 19:35
Bugeye side curtains, Tom Zuchowski, 19:09
Re: SU Carb -- Float Leaking, Tom Zuchowski, 19:09
Re: Brakes - Status and Thanks, Tom Zuchowski, 19:09
Updated light bulbs, Tom Zuchowski, 19:09
Countdown to the really big show., David Deutsch, 17:38
Re: Starting a local club, Mymgmidget, 17:30
Re: info on prototype sprite, Mike Gigante, 15:55
Re: Part Number Cross Ref. list, Mike Gigante, 15:40
Chico All British Car Show 6/28 (No Flats), Fred Krampits, 14:35
Re: Bowie, MD trip, Frmjr45, 14:15
Re: Sprite newsletters, Curtis Carlson, 14:07
RE: Bugeye wheels & tyres..., Hanna, Mark, 13:56
RE: SU Carb leaking, Shawn J. Tobin, 13:41
RE: SU Carb leaking, Hanna, Mark, 13:35
RE:SU Carb leaking, Shawn J. Tobin, 13:13
RE:SU Carb leaking, shk, 12:54
RE: SU Carb -- Float Leaking, Shawn J. Tobin, 12:34
Re: 72 Midget Shift Knob, Mark van der Linden, 12:31
RE: SU Carb -- Float Leaking, Mark van der Linden, 12:14
Re: 72 Midget Shift Knob, Richard D. Arnold, 11:46
Starting a local club, RMiller930, 11:09
Bugeye wheels & tyres..., RMiller930, 11:09
Re: SU Carb -- Float Leaking, Curtis Carlson, 08:10
Re: 72 Midget Shift Knob, Richard D. Arnold, 07:38
Long drive, No LBC, Richard D. Arnold, 07:20
RE: Riviera Blue, Daniel Thompson, 07:09
72 Midget Shift Knob, Chuck Ciaffone, 07:06
Re: Engine assembly lube the right stuff, Richard D. Arnold, 06:16
AW: SU Carb -- Float Leaking, Oram Stephen, 02:35

June 28, 1998

Ain't life grand (kinda long), Doug Ingram, 23:58
RE: SU Carb -- Float Leaking, Dave Formstone, 23:09
Times they are achangin', b-evans, 21:14
SU Carb -- Float Leaking, chasdoug, 21:10
Re: Bowie, MD trip, Philip Hubbard, 20:33
info on prototype sprite, Leo Speichinger, 20:29
Bowie, MD trip, Frank Clarici, 19:07
Re: Quiet day Web-I-tis, Larry Macy, 18:45
Re: Moss Bugeye Panels, Stella67, 17:50
Quiet day Web-I-tis, Rick/Carolyn, 17:33
Fuel Lines, GuyWeller, 15:42
Re: Moss Bugeye Panels, GuyWeller, 15:22
Brakes - Status and Thanks, Philip Hubbard, 14:05
Battery Replacement, Philip Hubbard, 14:05
bearing spacer, Jeff Boatright, 07:02

June 27, 1998

Re: Brakes - Confused, Philip Hubbard, 20:29
Re: Brakes - Confused, Valentine, 17:29
Re: Brakes - Confused, Tom Zuchowski, 15:36
RE: Brakes - Confused, Philip Hubbard, 13:48
Re: TTHC... Questions posed by Bob Evans, b-evans, 13:16
Re: TTHC... Questions posed by Bob Evans, Dave Woerpel, 12:03
Re: TTHC... Questions posed by Bob Evans, b-evans, 11:26
RE: TTHC... Questions posed by Bob Evans, Herold Faulkner, 10:39
Re: TTHC... Questions posed by Bob Evans, b-evans, 10:18
Re: TTHC... Questions posed by Bob Evans, Frank Clarici, 09:33
Re: TTHC... Questions posed by Bob Evans, Valentine, 08:08
RE: Brakes - Confused, Larry Macy, 07:47
Re: Clutch release bearing, Tom Zuchowski, 06:33
Re: Part Number Cross Ref. list, GMari58175, 05:11
Re: TTHC... Questions posed by Bob Evans, GMari58175, 05:03

June 26, 1998

Re: Riviera Blue, Evangelos G. Makris, 23:11
Re: Part Number Cross Ref. list, b-evans, 21:58
Re: TTHC... Questions posed by Bob Evans, b-evans, 21:43
RE: Moss Bugeye Panels, Dave Formstone, 21:17
RE: Brakes - Confused, Dave Formstone, 21:16
British Car Day 6/28, Jeff Church, 19:21
Re: Tanglewood British Car Show, carolien coulter, 18:50
RE: voodoo, Joerger, 17:46
SICP, Jeff Boatright, 17:20
Re: Riviera Blue, Frank Clarici, 16:35
Re: Chico CA, All British Car Show 6/28, Frank Clarici, 16:19
RE: Moss Bugeye Panels, BOLIN, TIMOTHY, 13:40
Re: Electric impact wrench, David Miles, 13:14
Re: U-haul trailers - question, RMiller930, 12:06
Re: split gauge, hello39, 11:38
Re: Clutch release bearing, Mark van der Linden, 10:54
Chico CA, All British Car Show 6/28, Fred Krampits, 10:25
Re: split gauge, Curtis Carlson, 10:24
Re: Front End Progress/Question, Mark van der Linden, 10:13
split gauge, Mark van der Linden, 10:06
RE: U-haul trailers - question, Ulix Goettsch, 09:04
Re: Front End Progress/Question, Ulix Goettsch, 09:00
RE: Moss Bugeye Panels, BOLIN, TIMOTHY, 08:56
RE: Brakes - Confused, Seippel, Jim J, 07:40
Sale flyer from Special interest car parts, hello39, 07:33
RE: U-haul trailers - question, Skip Tannen, 06:09
RE: Brakes - Confused, Chris Kotting, 05:48
RE: voodoo, Chris Kotting, 05:40
AW: voodoo, Oram Stephen, 03:37
RE: voodoo, Bert Kleinschmidt, 00:14

June 25, 1998

Re: Pertronix, was: 73 MGB, Les Myer, 23:28
I have an extra ampmeter guage..., d0m6803, 23:08
A name idea..., d0m6803, 22:59
Re: Pertronix, was: 73 MGB, Trevor Boicey, 22:56
Brakes - Confused, Philip Hubbard, 22:46
Re: Moss Bugeye Panels, Trevor Boicey, 22:35
Re: Pertronix, was: 73 MGB, Trevor Boicey, 22:29
Re: voodoo, Trevor Boicey, 22:25
Re: U-haul trailers - question, Amy Turner, 21:35
Re: Riviera Blue, GMari58175, 21:34
Liverpool Motor Wks., GMari58175, 21:31
Riviera Blue, Swift Justice, 21:30
Re: Swamped Midget Update, Mymgmidget, 21:24
U-haul trailers - question, Swift Justice, 21:20
Re: Front End Progress/Question, Philip Hubbard, 21:17
Re: Clutch release bearing, rickb, 21:12
RE: Moss Bugeye Panels, Dave Formstone, 20:58
RE: Electric impact wrench, Dave Formstone, 20:58
RE: Pertronix, was: 73 MGB, Les Myer, 19:14
RE: voodoo, Les Myer, 19:11
RE: Pertronix, was: 73 MGB, Les Myer, 19:10
Re: Wanted: split gauge, Frank Clarici, 19:09
Re: voodoo, Frank Clarici, 19:06
Bugeye problems, Steve Hombach, 18:28
Re: voodoo, Richard L. Bergstrom, 18:20
New Cam followers, GuyWeller, 16:45
RE: More Northern California Roads and Wire Wheel Questions, BOLIN, TIMOTHY, 15:44
More Northern California Roads and Wire Wheel Questions, Fred Krampits, 14:42
GRK1025, Evangelos G. Makris, 14:18
Wanted: split gauge, Curtis Carlson, 13:13
RE: Moss Bugeye Panels, BOLIN, TIMOTHY, 12:46
RE: voodoo, Larry Macy, 12:00
RE: voodoo, Chris Kotting, 10:21
Re: Pertronix, was: 73 MGB, Dwgwater, 10:15
Re: Front End Progress/Question, Ulix Goettsch, 09:51
Re: voodoo, Editors, Molecular Vision, 09:44
RE: voodoo, Chris Kotting, 09:28
Re: Rear Brakes, SHedman123, 08:44
RE: Pertronix, was: 73 MGB, jphender, 08:14
voodoo, Shawn J. Tobin, 08:00
RE: Into the light!, Daniel Thompson, 07:04
Into the light!, William M Walters, 06:49
Ignition types and gaps (was: Pertronix, was: 73 MGB), Richard D. Arnold, 06:43
Re: Front End Progress/Question, Philip Hubbard, 06:11
Re: Trying to buy a Bugeye., GMari58175, 04:30
Re: Trying to buy a Bugeye., GuyWeller, 00:49

June 24, 1998

Moss Bugeye Panels, d0m6803, 23:59
Electric impact wrench, Patton Dickson, 23:44
Re: Front End Progress/Question, Valentine, 23:13
Re: Pertronix, was: 73 MGB, Trevor Boicey, 23:12
Trying to buy a Bugeye., Herold Faulkner, 23:09
Great Machine Work, Mostyn Faulkner, 23:02
RE: Pertronix, was: 73 MGB, Les Myer, 22:25
Re: Pertronix, was: 73 MGB, Frank Clarici, 21:50
Front End Progress/Question, Philip Hubbard, 21:31
RE: Pertronix, was: 73 MGB, Jeff Boatright, 20:57
Re: Wheel Bearing Question, Philip Hubbard, 18:26
RE: Pertronix, was: 73 MGB, Les Myer, 18:00
Re: Swamped Midget Update, Mymgmidget, 17:23
Re: Clutch woes......, Trevor Boicey, 17:00
Re: Swamped Midget Update, Carl Elliott, 16:46
Clutch woes......, Michael Dietsche, 16:42
Re: Swamped Midget Update, Frank Clarici, 14:31
RE: water drain tap, Hanna, Mark, 13:22
RE: Pertronix, was: 73 MGB, Editors, Molecular Vision, 11:50
HIF 6 on a 1275, John Colosimo, 11:20
Rear Brakes, John Colosimo, 11:15
Re: 5-speed questions, Nory, 11:05
Re: 5-speed questions, Nory, 10:40
Re: unmovable brake pedal, Vllas, 10:05
Re: 5-speed questions, Larry and Sandi Miller, 09:23
Voltage regulator rebuild?, Jim Rowan, 08:15
Re: 5-speed questions, Robert B. Houston, 07:35
Re: Part Number Cross Ref. list, GMari58175, 06:54
Re: water drain tap, GMari58175, 06:33
Re: Wheel Bearing Question, Jeff Boatright, 06:14
Richmond VA MG meeting tonight LEGENDS BREWERY 7:30, Richard L. Bergstrom, 06:03
Re: Pertronix, was: 73 MGB, Jeff Boatright, 05:39
Re: Pertronix, was: 73 MGB, Trevor Boicey, 00:23

June 23, 1998

Re: water drain tap, shk, 23:28
Re: water drain tap, Frmjr45, 22:44
Re: water drain tap, Frmjr45, 22:34
Slave Pushrods..., Joerger, 22:32
Wheel Bearing Question, Philip Hubbard, 22:26
Re: water drain tap, John Morrison, 22:06
Re: Part Number Cross Ref. list, Grossac, 21:54
Swamped Midget Update, Mymgmidget, 21:41
Re: Pertronix, was: 73 MGB, Jeff Boatright, 20:52
Re: 5-speed questions, Nory, 20:42
Re: 5-speed questions, Frank Clarici, 19:35
5-speed questions, Nory, 19:03
Re: Wiring harness help, Rick/Carolyn, 17:03
"Going South" :-), CONAN, 16:25
Re: Clutch release bearing, Frank Clarici, 16:13
Re: water drain tap, Frank Clarici, 15:55
Two new articles - Targa Florio '67, HICR update, Mike Gigante, 15:46
Re: Wiring harness help, Frank Clarici, 15:44
Great advice at a great price!, jphender, 15:33
Part Number Cross Ref. list, GMari58175, 15:18
Getting Archives ?, Chuck Ciaffone, 14:25
Re: dead tach, Larry Macy, 10:09
Re: A good company, William M. Schickling, 09:50
Datsun 210 for sale in CA., Peter Samaroo, 09:07
Re: A good company, Mostyn Faulkner, 08:25
Wiring harness help, Jim Rowan, 08:19
Re: 1500: fuel problems, William M. Schickling, 08:05
RE: 1500: fuel problems, Chris Kotting, 07:52
Re: Headrest / Fairing, Larry and Sandi Miller, 07:39
RE: 1500: fuel problems, BOLIN, TIMOTHY, 07:38
1500: fuel problems, Charles Schaal, 06:24
RE: water drain tap, Chris Kotting, 05:23
Re: Headrest / Fairing, GMari58175, 04:41
AW: Engine Disposal, Oram Stephen, 01:29
AW: dead tach, Oram Stephen, 01:13

June 22, 1998

Re: water drain tap, Frmjr45, 22:46
Headrest / Fairing, William M. Schickling, 22:42
A good company, Mostyn Faulkner, 22:31
Clutch release bearing, Valentine, 22:12
Re: Lucas - Addition to Family, Jeff Boatright, 20:26
Re: Lucas - Addition to Family, SHedman123, 20:12
Re: water drain tap, Frank Clarici, 20:05
Re: water drain tap, Larry and Sandi Miller, 19:50
Re: Engine Disposal, Mike Gigante, 19:49
Wheel Bearings, Philip Hubbard, 19:38
Re: water drain tap, Frmjr45, 18:39
RE: Lucas - Addition to Family, Phil Vanner, 18:38
RE: Perronix, was: 73 MGB, Jeff Boatright, 18:38
re: Uneasy Rider, CONAN, 18:14
Re: Uneasy Rider, Frank Clarici, 18:00
Re: dead tach, Frank Clarici, 17:50
Re: Kitterer update, Frank Clarici, 17:38
Re: Lucas - Addition to Family, Frank Clarici, 17:33
Re: Baking parts (was:: Tires), Larry and Sandi Miller, 17:21
re: Uneasy Rider, CONAN, 17:16
Re: Baking parts, Larry and Sandi Miller, 17:14
Re: water drain tap, Frank Clarici, 17:02
Re: 948 Engine Backplate, Larry and Sandi Miller, 16:50
Re: Bead Blasting, AHSprite78, 16:31
Re: Baking parts (was:: Tires), AHSprite78, 16:23
water drain tap, Frmjr45, 15:49
Re: Lucas - Addition to Family, Nory, 15:24
RE: [Fwd: Scam Warning], Hanna, Mark, 14:16
Re: Lucas - Addition to Family, Dave Woerpel, 13:57
Re: [Fwd: Scam Warning], Jaral48462, 13:51
Re: dead tach, Larry Macy, 12:19
Re: 948 Engine Backplate, Peter Samaroo, 11:44
RE: Pertronix, was: 73 MGB, Editors, Molecular Vision, 11:44
948 Engine Backplate, Bob Frato, 11:26
Re: Lucas - Addition to Family, hello39, 11:21
Lucas - Addition to Family, Valentine, 11:16
Re: dead tach, Editors, Molecular Vision, 10:18
Re: dead tach, Editors, Molecular Vision, 09:35
Re: unmovable brake pedal, Hal Rogers, 09:33
Re: unmovable brake pedal, Ulix Goettsch, 09:29
Re: unmovable brake pedal, hello39, 09:28
single HS6 on 1275 engine, Evangelos G. Makris, 09:23
unmovable brake pedal, Evangelos G. Makris, 09:20
Re: Kitterer update, GMari58175, 04:20
AW: Engine Disposal, Oram Stephen, 01:22
Kitterer update, Dave Woerpel, 00:24
Re: Bead Blasting etc., Trevor Boicey, 00:11

June 21, 1998

Re: Junkyard Midget part II, Vllas, 22:46
Re: Bead Blasting etc., d0m6803, 22:27
Re: British Car Day at Bowie, MD, Jeff Church, 21:12
Re: dead tach, Amy Turner, 21:06
Re: British Car Day at Bowie, MD, Amy Turner, 21:03
dead tach, Jeff Boatright, 20:49
Re: British Car Day at Bowie, MD, Biff Jones, 20:16
Re: Sprite Racing, Gary Speckman, 20:10
Re: parts needed, Dave Woerpel, 19:44
Sprite Racing, Les Myer, 19:40
two steps back, David Deutsch, 19:22
Re: British Car Day at Bowie, MD, Frank Clarici, 19:14
Re: Shock Arm Retaining Bolt, Mike Gigante, 17:45
British Car Day at Bowie, MD, Frmjr45, 17:45
Re: Front Suspension Progress, Philip Hubbard, 17:37
Suspension Progress, Philip Hubbard, 17:34
Re: Shock Arm Retaining Bolt, Philip Hubbard, 17:29
Re: Front Suspension Progress, Mike Gigante, 17:28
Re: Engine Disposal, Mike Gigante, 17:23
Shock Arm Retaining Bolt, Philip Hubbard, 15:27
BL radio question, Stephen Oram, 12:54
Email Problem/No LBC content, Valentine, 08:42
Re: Fuse block, Tom Zuchowski, 06:09
Re: Tires ... etc (part III), Tom Zuchowski, 06:09
Re: Engine Disposal, Stephen Oram, 03:34
Re: BL radio question, Jeff Boatright, 03:19

June 20, 1998

Re: Engine Disposal, Ulix Goettsch, 23:42
Re: Engine Disposal, Trevor Boicey, 23:32
BL radio question, Jeff Boatright, 21:45
Re: Bead Blasting, Frank Clarici, 19:53
Re: NO LBC / Another use for cats, Larry and Sandi Miller, 17:46
Front Suspension Progress, Philip Hubbard, 17:17
Re: Long trip, Ulix Goettsch, 17:13
Re: NO LBC / Another use for cats, Les Myer, 14:33
Re: NO LBC / Another use for cats, Larry and Sandi Miller, 13:12
Re: Bead Blasting, Les Myer, 10:22
Re: Bead Blasting, Valentine, 09:27
NO LBC / Another use for cats, Nory, 09:18
Re: Bead Blasting, Bill & cindy, 09:08
Long trip, Stephen Oram, 07:49
Engine Disposal, Stephen Oram, 07:43
Re: Powder coating, Bruce Henderson, 03:33

June 19, 1998

Re: s.u. jet sizes, Vllas, 23:24
Re: The time has come....99 West Coast Meet, William M Walters, 21:52
Bead Blasting, William M Walters, 21:51
New Rotors Coming, Philip Hubbard, 20:44
Slave Cylinder Push Rod - additional info, Bob Frato, 19:59
Slave Cylinder Push Rod, Bob Frato, 19:31
Re: Who is the Moss distributor? Best Rollbar?, Richard L. Bergstrom, 17:15
Re: Tires ... etc (part III), Richard L. Bergstrom, 17:15
re: Baking parts..., CONAN, 16:43
Re: Baking parts (was:: Tires), GMari58175, 16:33
Ribcase gasket(s) replacement, Tyson Sherman, 16:30
Powder coating, CONAN, 16:17
Re: Tires ... etc (part III), Steve Byers, 14:31
Re: Baking parts (was:: Tires), Steve Byers, 14:13
Re: Quote, Larry and Sandi Miller, 13:38
RE: Spigot Bushing Replacement, Hanna, Mark, 12:29
Re: Baking parts (was:: Tires), Ulix Goettsch, 12:22
Quote, Curtis Carlson, 12:19
Tires ... etc (part III), Chuck Ciaffone, 10:07
Re: Baking parts (was:: Tires), Ulix Goettsch, 10:01
RE: Baking parts (was:: Tires), Herold Faulkner, 09:54
Generator indicator light---success!, Curtis Carlson, 08:39
Re: Who is the Moss distributor? Best Rollbar?, Larry and Sandi Miller, 08:25
Re: The time has come....99 West Coast Meet, GMari58175, 04:28
Re: Baking parts (was:: Tires), GMari58175, 04:05

June 18, 1998

Re: Baking parts (was:: Tires), Ulix Goettsch, 23:30
Re: s.u. jet sizes, Vllas, 23:22
wheels, Ulix Goettsch, 23:18
Re: s.u. jet sizes, Vllas, 22:26
Wheel Bearing/Rotor Success! and Problems, Philip Hubbard, 20:59
Re: BugEye Bonnet, Leo Speichinger, 20:21
RE: Door trim adhesive, Herold Faulkner, 20:18
Re: Door trim adhesive, Frank Clarici, 20:12
Baking parts (was:: Tires), Steve Byers, 20:03
Who is the Moss distributor? Best Rollbar?, Richard L. Bergstrom, 19:45
Re: Tires, Jeff Church, 19:30
Re: Door trim adhesive, Greg MAHNEY, 19:17
Re: s.u. jet sizes, Frank Clarici, 19:16
Re: BugEye Bonnet, Mike Gigante, 19:02
Re: Tires ... etc ! (leaking rear wheel hubs), Mike Gigante, 18:59
s.u. jet sizes, Vllas, 18:57
Re: 2002 Healey International -Reply, Mymgmidget, 18:05
Return of the Pineapple upside down Bugeye, RMiller930, 16:40
Re: Spigot Bushing Replacement, Frank Clarici, 16:33
RE: Fuse block, Andy Poling, 15:46
RE: Fuse block, Phil Vanner, 15:19
Re: Spigot Bushing Replacement, Bob Frato, 14:56
Tires ... etc (part II), Chuck Ciaffone, 14:48
Re: 2002 Healey International -Reply, GMari58175, 14:44
Re: Tires ... etc !, Larry and Sandi Miller, 14:14
Re: Spigot Bushing Replacement, Peter Samaroo, 14:04
Spigot Bushing Replacement, Bob Frato, 13:26
Re: 1500 Midget Clutch problems...., GuyWeller, 13:21
Re: Tires ... etc !, GuyWeller, 13:19
Re: Tires ... etc !, Editors, Molecular Vision, 12:19
Thank you., Curtis Carlson, 11:30
Re: Generator indicator light, Curtis Carlson, 11:03
RE: Generator indicator light, Phil Vanner, 10:57
Re: The time has come..., b-evans, 10:57
Re: BugEye Bonnet, YourName, 10:55
Re: Tires ... etc !, Editors, Molecular Vision, 10:50
Tires ... etc !, Chuck Ciaffone, 10:37
Re: Temperature Gauge Repair, Steve Byers, 10:16
Westwood NJ Brit show, Valentine, 09:27
Door trim adhesive, Jim Rowan, 08:41
Generator indicator light, Curtis Carlson, 08:27
Re: 1500 Midget Clutch problems...., hello39, 07:24
Fuse block, Russell Penney, 06:56
Re: 1500 Midget Clutch problems...., Chris Kotting, 06:51
Re: Temperature Gauge Repair, GMari58175, 06:49
Re: Tires, hello39, 06:49
Re: Westwood NJ Brit show/directions, GMari58175, 06:40
Tires, Chuck Ciaffone, 06:38
Re: Gasket Techniques, Richard D. Arnold, 06:38
Temperature Gauge Repair, shk, 01:41

June 17, 1998

Odd alternator wireing?, Joerger, 23:26
1500 Midget Clutch problems...., Richard D. Arnold, 23:11
Re: Dead Battery, Ulix Goettsch, 21:39
Re: BugEye Bonnet, Mike Gigante, 21:39
Re: Midget in SoCalif junkyard, Daryl May, 21:32
Re: Datsun 5-Speed, Ulix Goettsch, 21:30
Midget in SoCalif junkyard, Daryl May, 21:16
Re: Gasket Techniques, Les Myer, 21:13
Re: Impact Wrench - Rotors, Philip Hubbard, 20:48
Dead Battery, Philip Hubbard, 20:48
RE: Moto Lita Co. phone, Herold Faulkner, 18:55
Re: A good weekend, Tom Zuchowski, 18:53
Re: Gasket Techniques, Tom Zuchowski, 18:53
Break down, Frank Clarici, 17:53
Re: Westwood NJ Brit show/directions, David Deutsch, 16:56
BugEye Bonnet, YourName, 16:27
Westwood NJ Brit show, GMari58175, 15:54
Re: parts needed, Frank Clarici, 15:52
Moto Lita Co. phone, GMari58175, 15:51
RE: Steering columns, Gambony, Jim, 13:09
Charging problem..., Joerger, 12:54
Re: Steering columns, Nathaniel J. Leon, 12:53
Re: Steering columns, GuyWeller, 11:57
Re: Impact Wrench - Rotors, Ulix Goettsch, 10:25
Re: Torque Wrench, Ulix Goettsch, 10:21
2002 Healey International, Reid Trummel, 10:14
Web Site, Larry and Sandi Miller, 09:20
Re: Steering columns, Nathaniel J. Leon, 07:46
RE: parts needed, Daniel Thompson, 07:07
Re: Wanted??? shop manual, GMari58175, 06:28
RE: Torque Wrench, Chris Kotting, 05:35
RE: Wanted??? shop manual, Chris Kotting, 05:19

June 16, 1998

Re: parts needed, Larry and Sandi Miller, 23:08
Re: Torque Wrench, Andy Poling, 22:30
Re: Wanted??? shop manual, Les Myer, 22:23
Re: Torque Wrench, Les Myer, 22:20
Re: Torque Wrench, Mike Gigante, 21:49
Wanted??? shop manual, mark mitrev, 21:35
+ to -, Jeff Boatright, 21:29
Impact Wrench - Rotors, Philip Hubbard, 21:17
parts needed, Leo Speichinger, 20:36
Re: Torque Wrench, Steve Byers, 20:18
Re: Torque Wrench, Trevor Boicey, 20:06
Torque Wrench, Philip Hubbard, 19:58
re: Adventures in towing, CONAN, 19:11
Adventures in towing, David Deutsch, 18:59
Re: Steering columns, Trevor Boicey, 16:59
Re: Gasket Techniques, Les Myer, 16:15
re: Short throw shifter, CONAN, 16:04
Re: Steering columns, GuyWeller, 16:03
Re: List, Frank Clarici, 15:46
Re: Short shift kit, Frank Clarici, 15:43
Re: Strange Encounter, Frank Clarici, 15:34
Tanglewood British Car Show, CONAN, 15:28
German Fueo Pump, Chuck Ciaffone, 14:23
starter and + to -, Editors, Molecular Vision, 13:35
RE: Tonneaus and Tops, Phil Vanner, 12:59
RE: Lake Superior Vintage Sports Car Rendezvous, Phil Vanner, 09:53
speedwell sprite, Daniel Thompson, 09:44
Re: Short shift kit, Ulix Goettsch, 09:38
Waterpump bad?, Dave Vrba, 09:28
Re: Heater Removal?, Ulix Goettsch, 09:23
Completely Restored 74' Midget for sale., CliveNice, 09:22
Fried Tach cable UPDATE, Dave Vrba, 09:07
RE: Lake Superior Vintage Sports Car Rendezvous, Phil Vanner, 08:48
FW: '66 SPRITE 4 SALE, Phil Vanner, 08:47
Re: Lake Superior Vintage Sports Car Rendezvous, John Colosimo, 08:23
Short shift kit, Jim Rowan, 08:10
Re: Lake Superior Vintage Sports Car Rendezvous, Curtis Carlson, 07:24
Re: A good weekend, Peter Samaroo, 06:54
Re: Heater Removal?, Peter Samaroo, 06:39
Heater Removal?, Chuck Ciaffone, 06:26
Gasket Techniques, J. Adrian Barnes, 06:16

June 15, 1998

Re: List, Larry and Sandi Miller, 22:27
Re: Painting and undercoating, BRUCE48127, 22:08
Re: List, Patton Dickson, 21:42
Re: Wheel bearings, Philip Hubbard, 21:10
Re: Wheel bearings, Frank Clarici, 21:00
Wheel bearings, Philip Hubbard, 20:49
Re: Parts solvents?, Les Myer, 18:41
Re: 3 new articles that may be of interest, Mike Gigante, 17:21
Re: CARB HOOK-UPS, Nory, 17:07
Lake Superior Vintage Sports Car Rendezvous, Phil Vanner, 16:55
Re: anti-roll bar, Frank Clarici, 16:44
Re: CARB HOOK-UPS, Frank Clarici, 16:42
Re: A good weekend, Shawn J. Tobin, 14:39
A good weekend, Reid Trummel, 14:12
List, Larry and Sandi Miller, 11:29
Fried Tach cable, Dave Vrba, 11:18
Torque settings table, Peter Samaroo, 10:40
Torque settings, Peter Samaroo, 10:27
1999 West Coast Meet, Reid Trummel, 10:13
Re: anti-roll bar, AHSprite78, 09:40
Re: Parts solvents?, Matt Liggett, 08:19
Re: 3 new articles that may be of interest, Matt Liggett, 07:30
Strange Encounter, Daryl May, 07:08
AW: Radio Suppression, Oram Stephen, 02:03

June 14, 1998

RE: CARB HOOK-UPS, Joerger, 23:21
Tonneaus and Tops, d0m6803, 21:07
CARB HOOK-UPS, Daryl May, 20:48
Re: "The British are Coming !!!" A special thank-you, Larry Macy, 20:09
Front Suspension Update - Long, Philip Hubbard, 18:51
Info about Vanderbuilt Invitational Concours, David Deutsch, 18:42
Re: Parts solvents?, Ron Soave, 17:43
BugEye Apologia, YourName, 16:53
"The British are Coming !!!" A special thank-you, David Deutsch, 16:35
Re: Radio Suppression, Ulix Goettsch, 12:01
Re: Grade 8 vs Grade 5, Ulix Goettsch, 11:51
Re: Parts solvents?, Les Myer, 11:50
Re: Tight Piston, Les Myer, 11:34
Re: Radio Suppression, Frank Clarici, 09:15
Tight Piston, J. Adrian Barnes, 09:04
Re: Radio Suppression, Jeff Boatright, 08:40
Re: Parts solvents?, Matt Liggett, 08:12
Re: Steering columns, William Elliott, 08:06
Steering columns, Tom Zuchowski, 07:09
Radio Suppression, Stephen Oram, 06:53
Re: Rubber grommets, GMari58175, 05:57

June 13, 1998

Re: Well, it USED to be a spridget..., Mike Gigante, 22:44
RE: Checking my wiring, Joerger, 21:06
Re: Midget Mania 2001 San Francisco California, Rick/Carolyn, 16:51
Re: Grade 8 vs Grade 5, GuyWeller, 15:20
Re: Adjusting Valves Midget 1500, GuyWeller, 15:20
Checking my wiring, GuyWeller, 14:34
Sprite for sale, Doug Ingram, 14:17
FAQ?, Andy Poling, 12:38
Re: Grade 8 vs Grade 5, Richard L. Bergstrom, 11:56
Re: Adjusting Valves Midget 1500, Richard L. Bergstrom, 11:56
Re: A tale of two dashes, Frank Clarici, 08:54
Re: Adjusting Valves Midget 1500, Richard L. Bergstrom, 06:43
Re: The time has come...., Tom Zuchowski, 06:32
Re: Wishbone Pan Nuts, Tom Zuchowski, 06:30
Re: Whitworth tools, Tom Zuchowski, 06:30
Fun Run to Hagerstown, MD 4 MG '98 / Upon further review, David Deutsch, 06:14
RE: Solution rusty screw heads, Peter Samaroo, 05:15
A tale of two dashes, Swift Justice, 01:44

June 12, 1998

Well, it USED to be a spridget..., Joerger, 23:18
Re: Wishbone Pan Nuts, Philip Hubbard, 22:50
Re: Adjusting Valves Midget 1500, Trevor Boicey, 22:35
Adjusting Valves Midget 1500, Richard D. Arnold, 22:32
Stainless, CONAN, 22:08
RE: Solution rusty screw heads, Dave Formstone, 22:05
Re: Historic color project (somewhat long), William M. Schickling, 21:55
RE: Whitworth tools, Dave Formstone, 21:50
Re: LONG Re: The time has come...., b-evans, 20:20
Re: Solution rusty screw heads, Frank Clarici, 20:19
Solution rusty screw heads, Peter Samaroo, 20:08
Re: Wishbone Pan Nuts, Steve Byers, 19:46
Re: Stainless was Whitworth tools, Richard L. Bergstrom, 19:45
Re: Wishbone Pan Nuts, Peter Samaroo, 19:38
Re: Stainless, Ron Soave, 19:28
Re: Wishbone Pan Nuts, Frank Clarici, 18:56
Re: Stainless, Frank Clarici, 18:54
Re: anti-roll bar, Mike Gigante, 17:30
Re: anti-roll bar, Mike Gigante, 17:10
Cheap RB parts car in Raleigh NC, CONAN, 16:24
anti-roll bar, CONAN, 16:04
re: Stainless was Whitworth tools, Thorpe, Jeffrey, 15:27
Re: Dilemma, rickfisk, 15:18
re: Stainless was Whitworth tools, Peter Samaroo, 15:07
Re: Wishbone Pan Nuts, Peter Samaroo, 14:52
Spridget for Sale (PA, USA), S. L. Hower, 14:47
from the local paper, robert weeks, 14:21
On the road again., Peter Samaroo, 14:06
Re: JB Weld, Steve Byers, 14:01
RE: The time has come...., Hanna, Mark, 12:14
Re: Because getting there is half the fun /MG '98, Larry Macy, 11:58
Re: Battery size, Pete & Caroline Phillips, 10:50
Re: Painting and undercoating, Ulix Goettsch, 10:13
Re: JB Weld, Ulix Goettsch, 10:02
RE: I Need A Part, Hanna, Mark, 09:14
Re: Painting and undercoating, GMari58175, 09:10
Battery size, Dwgwater, 09:04
Pressure Switch Number, Richard D. Arnold, 07:50
RE: Dilemma, Thorpe, Jeffrey, 07:03
Bugeye Questions, Bob Frato, 06:57
RE: anti-roll bar, Russell Penney, 05:48
Re: anti-roll bar, Mike Gigante, 05:09
Visiting England this July, Evangelos G. Makris, 04:47
Re: anti-roll bar, Evangelos G. Makris, 04:44
Because getting there is half the fun /MG '98, David Deutsch, 02:38

June 11, 1998

Re: A/C certification..., Trevor Boicey, 23:42
re: Whitworth tools, CONAN, 23:09
RE: Whitworth tools, Dave Formstone, 22:42
Re: Dilemma, Trevor Boicey, 22:30
Wishbone Pan Nuts, Philip Hubbard, 22:18
Painting and undercoating, d0m6803, 21:42
Re: JB Weld, Philip Hubbard, 21:40
Re: The time has come...., Jeff Boatright, 21:34
Re: Dilemma, Jeff Boatright, 21:34
Re: JB Weld, Frank Clarici, 20:53
Re: anti-roll bar, Daryl May, 20:46
Re: JB Weld, Mark Endicott, 20:42
Re: Steering Wheel Nut, Daryl May, 20:29
Re: Dilemma, rickfisk, 20:25
AHSTC Phila Tour, Jason Urban, 20:01
Flashers (not the kind in trench coats), Swift Justice, 19:57
Re: JB Weld, Steve Byers, 19:54
JB Weld, Philip Hubbard, 19:39
Re: The time has come...., Jeff Church, 19:19
Re: Dilemma, William Elliott, 19:05
Re: Dilemma, Nory, 18:50
Re: Midget Mania 2001 San Francisco California, Frank Clarici, 18:36
Re: anti-roll bar, Ulix Goettsch, 18:14
Re: Dilemma, Richard L. Bergstrom, 18:13
Re: anti-roll bar, Mike Gigante, 17:17
Dilemma, J. Adrian Barnes, 16:51
RE: The time has come...., Patton Dickson, 16:48
Re: Midget Mania 2001 San Francisco California, Mark Endicott, 16:42
anti-roll bar, CONAN, 16:33
I Need A Part, Larry and Sandi Miller, 16:22
RE: The time has come...., Hanna, Mark, 16:10
re: The time has come...., CONAN, 15:58
Re: LONG Re: The time has come...., Jaral48462, 15:53
Re: anti-roll bar, Trevor Boicey, 15:46
Re: The time has come...., GMari58175, 15:35
Re: NON LBC / A/C question, Nory, 15:26
Re: LONG Re: The time has come...., GMari58175, 15:22
RE: The time has come...., Patton Dickson, 15:21
Midget Mania 2001 San Francisco California, Fred Krampits, 15:06
Re: The time has come...., GMari58175, 14:55
RE: The time has come...., Patton Dickson, 14:44
Re: The time has come...., Larry and Sandi Miller, 14:12
Re: The time has come...., Larry Macy, 12:30
Re: The time has come...., Patton Dickson, 11:40
LONG Re: The time has come...., Editors, Molecular Vision, 11:12
Club Contact Info, Reid Trummel, 10:51
Re: The time has come...for what?, b-evans, 10:51
Re: The time has come...., b-evans, 10:13
Re: anti-roll bar, Ulix Goettsch, 09:51
Re: touch-up paint, Ulix Goettsch, 09:48
Re: Whitworth tools, b-evans, 08:01
A/C certification..., S. L. Hower, 07:30
anti-roll bar, Evangelos G. Makris, 06:03

June 10, 1998

RE: Whitworth tools, Dave Formstone, 22:55
Re: NON LBC / A/C question, Jeff Boatright, 22:27
NON LBC / A/C question, Nory, 22:06
touch-up paint, Nory, 21:49
Metal Bushing Mystery, Philip Hubbard, 20:28
Re: Horns, Nory, 19:45
Re: Whitworth tools, Larry and Sandi Miller, 19:37
Re: Whitworth tools, Tom Zuchowski, 18:58
Re: The time has come...for what?, Editors, Molecular Vision, 16:23
Re: Wiring harness, GMari58175, 15:37
Re: water pump or dynamo?, Frank Clarici, 15:31
The time has come...for what?, Reid Trummel, 15:06
Re: No synchro in second, William M. Schickling, 14:32
Re: water pump or dynamo?, Curtis Carlson, 14:16
Re: water pump or dynamo?, Chuck Ciaffone, 14:13
water pump or dynamo?, Editors, Molecular Vision, 13:44
Re: Wiring harness, Steve Byers, 13:43
RE: Steering Wheel Nut, Hanna, Mark, 11:17
Re: Wiring harness, Wm. Severin Thompson, 09:08
Wiring harness, Jim Rowan, 09:02
Valve cover plates, Jim Rowan, 08:38
Re: Midget 1500 Help, Michael Dietsche, 08:28
Re: Horns, Jeff Sharpe, 08:21
Re: The time has come...., GMari58175, 06:40
MGB: Answer, Dr. Glenn C. Grant, 06:27
Re: Whitworth tools, Peter Samaroo, 06:09
Re: No synchro in second, Mike Gigante, 04:51

June 09, 1998

For your cross - reference list...., Richard D. Arnold, 22:50
Re: Midget 1500 Help, Trevor Boicey, 22:16
Re: Horns, Dustin Howarth, 21:26
Another Rolled Spridget, Deikis, 21:04
Re: Whitworth tools, Frank Clarici, 19:46
Re: Steering Wheel Nut, Jeff Church, 19:44
Re: No synchro in second, William M. Schickling, 19:23
Whitworth tools, Tom Zuchowski, 19:01
Steering Wheel Nut, Daryl May, 18:56
Re: restoration courses, Nory, 18:56
Re: Rear suspension, Mike Gigante, 18:14
Horns...., Michael Dietsche, 18:03
Re: Horns, Jeff Sharpe, 16:20
Re: Horns, Jeff Sharpe, 14:55
any spare horns?, jim wright, 13:27
Re: Midget 1500 Help, Peter Samaroo, 13:12
Re: Midget 1500 Help, Peter Samaroo, 13:12
Re: any spare horns?, hello39, 12:58
Re: any spare horns?, hello39, 12:57
RE: Midget 1500 Help, Chris Kotting, 12:33
Midget 1500 Help, S. L. Hower, 12:00
RE: any spare horns?, Chris Kotting, 11:34
Re: any spare horns?, Ulix Goettsch, 11:17
Re: any spare horns?, Editors, Molecular Vision, 10:57
Re: any spare horns?, Curtis Carlson, 10:46
Re: any spare horns?, Ulix Goettsch, 10:27
RE: Midget Window Winders, Ulix Goettsch, 10:15
RE: Rear suspension, Russell Penney, 08:19
Re: Rear suspension, Peter Samaroo, 08:14
Rear suspension, Russell Penney, 07:20
Re: No synchro in second, Peter Samaroo, 06:29
Re: rear suspension questions, Peter Samaroo, 06:16
rear suspension questions, Evangelos G. Makris, 04:54
Re: restoration courses, Richard D. Arnold, 04:30
restoration courses, Evangelos G. Makris, 03:28
I rolled my racecar!, Mike Gigante, 02:33

June 08, 1998

Re: The time has come.... -Reply, Jeff Boatright, 23:17
Re: The time has come.... -Reply, b-evans, 23:00
Re: Anyone have feedback on Apple Hydrol, Jeff Boatright, 21:12
Re: Anyone have feedback on Apple Hydrol, Frank Clarici, 20:57
any spare horns?, Dustin Howarth, 20:17
Anyone have feedback on Apple Hydrol, Brian L. Chaffins, 19:48
No synchro in second, Greg MAHNEY, 19:11
Re:, Philip Hubbard, 18:07
Re: Fulcrum Pin Nuts/Philosophy, Nory, 17:56
Re: weight of ribcase tranny, Frank Clarici, 16:40
Re: Parts solvents?, GuyWeller, 16:01
Re: Midget Window Winders, Steve Byers, 15:43
RE: Midget Window Winders, Gambony, Jim, 14:52
Re: Midget Window Winders, Christopher Palmer, 14:03
RE: Midget Window Winders, Editors, Molecular Vision, 13:54
RE: Midget Window Winders, mike cook, 13:41
Re: Midget Window Winders, Steve Byers, 13:33
Re: MGB question, robert weeks, 13:25
Re: The time has come...., b-evans, 13:18
tranny weight - thanks!, Tyson Sherman, 13:07
Midget Window Winders, Christopher Palmer, 12:23
Re: weight of ribcase tranny, rickfisk, 11:05
Re: # for Rivergate Restoration Products, Phil Profili, 10:53
# for Rivergate Restoration Products, Peter Samaroo, 10:42
weight of ribcase tranny, Tyson Sherman, 10:25
Re:, Ulix Goettsch, 10:04
Re: Phila MG vs. TR Rally / Brits of Hudson Autocross, Larry Macy, 08:50
MGB question, Dr. Glenn C. Grant, 06:41
Nice red Midget spotted, J. Adrian Barnes, 06:18
Re: Front Suspension Progress, Larry Macy, 04:38

June 07, 1998

Need a Crane/Allision/Lumention shutter, Trevor Boicey, 23:40
Re:, Philip Hubbard, 22:52
Update: Low oil pressure light, Richard D. Arnold, 20:53
Re: Fulcrum Pin Nuts/Philosophy, carolien coulter, 20:46
Re: Front Suspension Progress, Larry and Sandi Miller, 19:59
Re: Front Suspension Progress, Ulix Goettsch, 19:07
Re: Parts solvents?, rickfisk, 19:06
Re: The time has come...., William M. Schickling, 18:28
Re: Phila MG vs. TR Rally / Brits of Hudson Autocross, David Deutsch, 16:42
Phila MG vs. TR Rally, Larry Macy, 15:37
Front Suspension Progress, Philip Hubbard, 15:10
Re: Parts solvents?, Mymgmidget, 14:37
Re: Parts solvents?, Mymgmidget, 14:36
The time has come...., b-evans, 11:05
Parts solvents?, Ron Soave, 09:26
Long: Flickering Oil Pressure Light, Richard D. Arnold, 09:22

June 06, 1998

Re: Nut Splitter Usage, Trevor Boicey, 23:24
Re: Low oil pressure / thermostat, Richard D. Arnold, 22:28
Re: Driver's Side Fulcrum Pins Out!!!, Dave, 20:10
Re: Driver's Side Fulcrum Pins Out!!!, Larry Macy, 20:05
Re: Fulcrum Pin Progress, Larry Macy, 20:05
Seats, robert weeks, 19:45
Thanks / Midget seen for sale, robert weeks, 19:07
Driver's Side Fulcrum Pins Out!!!, Philip Hubbard, 18:32
Re: Low oil pressure / thermostat, b-evans, 17:40
Low oil pressure / thermostat, Richard D. Arnold, 15:54
Re: Fulcrum Pin Progress, Steve Byers, 12:31
Fulcrum Pin Progress, Philip Hubbard, 11:51
Oklahoma, bobchamb, 11:32
Nut Splitter Usage, Philip Hubbard, 08:56
Re: Rear Main Bearing Oil Seal Kit Source, b-evans, 07:55

June 05, 1998

Re: Rear Main Bearing Oil Seal Kit Source, Doug Ingram, 23:34
Re: Fulcrum Pin Nuts/Philosophy, Rick/Carolyn, 22:47
Re: Fulcrum Pin Nuts/Philosophy, Frank Clarici, 20:16
Fulcrum Pin Nuts/Philosophy, Philip Hubbard, 19:48
Re: Fulcrum Pins, Ulix Goettsch, 18:16
Fulcrum Pins, Philip Hubbard, 17:36
Re: Day Off - Are We Having Fun Yet?, Frank Clarici, 17:17
Re: Overdrive in Midgets?, GuyWeller, 17:04
Re: New Starter, GuyWeller, 16:28
Day Off - Are We Having Fun Yet?, Philip Hubbard, 16:05
Rear Main Bearing Oil Seal Kit Source, Brian Thornton, 14:54
george merrywheather, Vllas, 10:41
Re: Protecting Flexible Brake Lines, Ulix Goettsch, 10:30
Re: Protecting Flexible Brake Lines, hello39, 09:16
Protecting Flexible Brake Lines, Richard D. Arnold, 09:02
Re: Midget Top Speed, Richard D. Arnold, 09:02
Re: Midget engine removal, Larry Macy, 07:50
Re: Midget engine removal, LRuggi2635, 06:07

June 04, 1998

1967 MKIV Sprite for Sale, Les Myer, 23:29
BugEye Fir sale or trade (Long), jburruso, 21:06
Re: Wheel Bearings, Steve Byers, 20:47
Battery/Alternator - Thanks!, Philip Hubbard, 20:12
Wheel Bearings, Philip Hubbard, 20:08
3 new articles that may be of interest, Mike Gigante, 19:04
Re: New Starter, Tom Zuchowski, 18:34
Re: Midget engine removal, Mike Gigante, 18:29
Midget engine removal, Tyson Sherman, 17:45
Re: Starter - Progress Report/Thanks, Steve Byers, 13:50
RE: Starter - Progress Report/Thanks, Chris Kotting, 12:18
steering rack lube, Peter Samaroo, 09:55
Re: Fan Clutch / Elec Fan / SICP on Sunday, Larry Macy, 07:30
Re: used tranny prices, Peter Samaroo, 07:23
Re: Starter - Progress Report/Thanks, Peter Samaroo, 07:09
Re: leaking dipstick on 1500 Midget, Richard D. Arnold, 06:38
Re: Rusty floor, Richard D. Arnold, 06:38
Re: Starter - Progress Report/Thanks, Jaral48462, 06:01
RE: Starter - Progress Report/Thanks, Chris Kotting, 05:56

June 03, 1998

Re: Starter - Progress Report/Thanks, Ulix Goettsch, 22:27
Starter - Progress Report/Thanks, Philip Hubbard, 21:49
Fan Clutch / Elec Fan / SICP on Sunday, Mymgmidget, 21:17
Re: Off Topic Modern Sedans? Thanks for the input., Mark Endicott, 20:02
Re: speedo pinion, Frank Clarici, 19:10
speedo pinion, carolien coulter, 18:45
used tranny prices, Tyson Sherman, 15:22
RE: Overdrive in Midgets?, Patton Dickson, 13:18
Re: Overdrive in Midgets?, Trevor Boicey, 13:17
Overdrive again, J. Adrian Barnes, 13:12
RE: Overdrive in Midgets?, Gambony, Jim, 13:11
Overdrive in Midgets?, J. Adrian Barnes, 12:48
Re: speedometer pinion, CMLove, 11:37
Re: speedometer pinion, CMLove, 11:36
Re: Off Topic Modern Sedans?, Dwgwater, 09:24
horn, carolien coulter, 09:18
Re: keeping SUs looking nice, Brent & Susan Laube, 08:22
Re: keeping SUs looking nice, Peter Samaroo, 07:16
Off Topic Modern Sedans?, Les Myer, 00:30

June 02, 1998

Re: Off Topic Modern Sedans?, William Elliott, 21:41
RE: The little Midget that really wants to...., Dave Formstone, 21:41
RE: Transmission problem, Dave Formstone, 21:41
Re: Preflighting., b-evans, 21:35
Re: Off Topic Modern Sedans?, b-evans, 21:05
Off Topic Modern Sedans?, Mark Endicott, 20:21
keeping SUs looking nice, Matt Liggett, 20:07
Re: front brake lines, carolien coulter, 19:54
The little Midget that really wants to...., Tyson Sherman, 19:46
Re: Dimensions and weight of body shell - Midget, J. Adrian Barnes, 18:25
Re: servicing lever dampers, Mike Gigante, 18:08
Re: speedometer pinion, Frank Clarici, 17:28
engine: sealant on rear main brg caps?, Matt Liggett, 16:38
Re: Front Wire hub grease cap?, Steve Byers, 16:03
Re: front brake lines, Jeff Church, 15:46
Re: UK events this July?, b-evans, 15:44
UK events this July?, Evangelos G. Makris, 15:16
Dimensions and weight of body shell - Midget, cfiddes, 11:56
I need a steering wheel., Peter Samaroo, 11:17
Re: rear shock absorbers, Ulix Goettsch, 09:54
Re: servicing lever dampers, Ulix Goettsch, 09:51
Re: New Starter, Ulix Goettsch, 09:47
rear shock absorbers, Evangelos G. Makris, 09:24
servicing lever dampers, Evangelos G. Makris, 09:14
speedometer pinion, Evangelos G. Makris, 09:11
Front Wire hub grease cap?, Brian L. Chaffins, 07:14
Re: Transmission problem, Peter Samaroo, 07:03
Re: New Starter, Peter Samaroo, 06:40
Re:, chasdoug, 05:51
Re: Wheel Bearings, chasdoug, 05:47
Re: New Starter, Pete & Caroline Phillips, 05:14
Re: New Starter, Ulix Goettsch, 00:15

June 01, 1998

Re: Transmission problem, Richard D. Arnold, 23:31
Re: Still more BCW! Day 3, b-evans, 22:00
Suspension & Wheel Bearing Progress, Philip Hubbard, 21:36
New Starter, Philip Hubbard, 21:35
RE: Transmission problem, Dave Formstone, 20:40
Re: front brake lines, Frank Clarici, 20:24
front brake lines, Kurt Guerdrum, 20:14
Transmission problem, Tyson Sherman, 19:07
re: Top Frame and Name - Bugeye, CONAN, 17:06
Re: cleaning, painting and tapping the block, Ron Soave, 16:29
re: Top Frame and Name - Bugeye, CONAN, 16:23
re: Suspension bushings, CONAN, 15:39
HS2 carbs, William M. Schickling, 14:30
Re:, Pete & Caroline Phillips, 14:01
Re: wirewheel rtv, David Ramsey, 12:25
Re: Beautiful Saturday drive, bad sunburn and couple of questions, Editors, Molecular Vision, 11:45
Re: Beautiful Saturday drive, bad sunburn and couple of questions, Fred Krampits, 11:25
wirewheel rtv, Shawn J. Tobin, 11:19
Re:, Geoffrey P. Muttart, 11:08
RE: Beautiful Saturday drive, bad sunburn and couple of questions, Gambony, Jim, 10:47
Beautiful Saturday drive, bad sunburn and couple of questions, Fred Krampits, 09:57
[no subject], Peter Samaroo, 07:14
Re: wiper question, Brian Thornton, 05:28