Greg MAHNEY wrote:
>
> Jim
>
> I'll be interested in what others say, but a few months ago I stuck mine
> down with some silicone sealant (I think it was a general purpose household
> one). So far it has worked fine, and I would expect I'll be able to get it
> off with no dramas.
>
> Good luck.
>
I did this to our Mini 4 years ago, everything is still stuck.
And the Mini has glued (silicone) in window channels.
I did have to remove one once when a window broke, the paint stayed but
it was not easy removing the window channel, not impossible, just not
real easy.
Good luck
Frank
> Greg
>
> >I'm putting new door seal trim in the Sprite. The channel that
> >holds the trim in place is pretty small and not enough to
> >hold it on without some sort of adhesive. I would like
> >something that will not permanently bond so that I could remove
> >the trim in the future without ripping paint off.
> >Recommendations?
> >
> >TIA
> >
> >Jim Rowan
> >60 Sprite
--
Frank Clarici Toms River, NJ
Too many LBCs
3 Sprites, an Austin A40, and an Austin Mini all on the road.
1 Jaguar XJ6 family car, 1 Racer Midget project , & 2 Parts Spridgets
Check out my home page at http://www.exit109.com/~spritenut
--------------------------------------------------------------------------------------------
|