shop-talk (date)

November 01, 2005

Parts Washer, wmc_st, 07:23

October 31, 2005

Re: Parts Washer, Mike Rambour, 20:54
RE: Parts Washer, Steve Shipley, 20:34
Re: Parts Washer, David C., 20:27
RE: Parts Washer, Charley Robinson, 16:45
Re: Parts Washer, Bill Rabel, 12:57
Re: Parts Washer, pethier@isd.net, 10:51
RE: Parts Washer, doug, 10:05
Every shop needs one of these..., Kent Sullivan, 10:01
Re: Parts Washer, Bill Rabel, 09:31
RE: Parts Washer, Charley Robinson, 08:24
Re: electric baseboard heater repair, E. John Puckett, 07:54
welding lead color, John Niolon, 07:02
Re: Parts Washer, Steve Shipley, 00:34

October 30, 2005

Re: Parts Washer, Bill Gilroy, 23:25
Re: electric baseboard heater repair, David Scheidt, 21:52
Re: electric baseboard heater repair, E. John Puckett, 21:43
electric baseboard heater repair, David Scheidt, 19:25
Re: Gearwrench -- Long pattern vs. normal, flex heads, etc., David Scheidt, 15:16
Re: Air leak?, Chris Kantarjiev, 14:12
RE: Simple Green (was air leak), Randall, 11:47
Simple Green (was air leak), Chas. Schlismann, 11:30
Re: Air leak?, David Scheidt, 10:49
Re: Air leak?, Trevor Boicey, 10:37
RE: Air leak?, Randall, 09:27
Re: Air leak?, Chas. Schlismann, 09:03
RE: Air leak?, ejrussell@mebtel.net, 08:57
Re: Air leak?, Steve Hammatt, 08:36
Re: Air leak?, Kai M. Radicke, 08:28
Re: Air leak?, E. John Puckett, 08:19
RE: Air leak?, Charley Robinson, 08:17
RE: Air leak?, Gordie's Garage, 07:55
Air leak?, Matt Trebelhorn, 07:35

October 28, 2005

Re: Thanks...house wiring, John Niolon, 09:24
Thanks...house wiring, Traci Pearson, 08:52

October 27, 2005

Re: Where to buy coveralls?, philip ethier, 21:58
Re: Where to buy coveralls?, Roland Wilhelmy, 18:59
Re: Motion lights, TONY CLARK, 17:25
Re: Where to buy coveralls?, Ed Van Scoy, 14:36
Gearwrench -- Long pattern vs. normal, flex heads, etc., Mark Andy, 14:07
Re: Motion lights, Larry Spector, 13:38
Re: Where to buy coveralls?, Mark Andy, 13:14
Motion lights, Eric, 11:52
RE: Where to buy coveralls?, Ben Zwissler, 10:01
RE: Where to buy coveralls?, Randall, 09:44
Re: Where to buy coveralls?, Eric J Russell, 09:24
Re: Where to buy coveralls?, John Miller, 09:20
Re: Where to buy coveralls?, Bill Gilroy, 09:11
RE: Where to buy coveralls?, MDunst / Gasket Works USA, 09:08
Re: Where to buy coveralls?, TONY CLARK, 08:55
Re: Where to buy coveralls?, Eric, 08:39
Re: Where to buy coveralls?, David Scheidt, 08:23
Re: Where to buy coveralls?, Eric J Russell, 08:14
Re: Where to buy coveralls?, Peter J. Thomas, 07:59
Where to buy coveralls?, Mark Andy, 07:36

October 26, 2005

RE: Eclipse (DSM 1g) clutch, Mike Frerichs, 22:10
RE: house wiring problem, Gordie's Garage, 17:54
RE: http://www.garage-pak.com/, John T. Blair, 16:50
RE: http://www.garage-pak.com/, Mullen, Tim \(IIS\), 15:29
Re: Eclipse (DSM 1g) clutch, ron meek, 15:08
Re: http://www.garage-pak.com/, Wayne, 14:59
http://www.garage-pak.com/, Eric, 14:27
Re: Eclipse (DSM 1g) clutch, Timothy R. Hoerning, 14:26
Re: Eclipse (DSM 1g) clutch, ron meek, 14:09
RE: house wiring problem, Randall, 12:27
RE: house wiring problem, Wayne, 12:03
Bonding rubber to metal - Survey Results, rjhco, 11:28
RE: house wiring problem, Randall, 11:20
Eclipse (DSM 1g) clutch, ericm, 10:40
RE: house wiring problem, Mullen, Tim \(IIS\), 10:21
Re: house wiring problem, doug, 09:17
Re: house wiring problem, Karl Vacek, 08:16
Re: house wiring problem, John Niolon, 08:13
Re: house wiring problem, doug, 07:35
RE: house wiring problem, Randall, 05:51
house wiring problem, Traci Pearson, 01:34

October 25, 2005

Re: Bonding rubber to metal, doug, 13:54
Re: Bonding rubber to metal, David Scheidt, 13:38
RE: Bonding rubber to metal, Mike Rambour, 13:25
RE: Bonding rubber to metal, Randall, 13:11
Re: Bonding rubber to metal, Bob Hare, 12:12
Re: Bonding rubber to metal, CHRIS KOTTING, 12:07
Re: Bonding rubber to metal, CHRIS KOTTING, 12:06
Re: Bonding rubber to metal, CHRIS KOTTING, 12:06
Re: Bonding rubber to metal, LSAPEX, 11:24
Re: Bonding rubber to metal, Mike Lee, 10:40
Bonding rubber to metal, rjhco, 10:03
Re: Crack Filling, Richard Beels, 01:03

October 23, 2005

RE: What a day., Randall, 19:21
RE: What a day., John T. Blair, 18:42
RE: What a day., Randall, 18:35
What a day., John T. Blair, 17:16
Crack Filling, john matthews, 09:04

October 22, 2005

Re: Another electrical mystery now DSL, David C., 21:52
Re: DC motor question, Marc, 19:47
Re: DC motor question, Marc, 19:27
RE: DC motor question, Randall, 19:16
DC motor question, Marc, 18:56
RE: Whole house water shutoff valve, Randall, 15:04
Re: Whole house water shutoff valve, doug, 14:12
Whole house water shutoff valve, PJ McGarvey, 09:51

October 21, 2005

Re: Bagging grass w/riding mower, Nolan Penney, 05:03

October 20, 2005

Re: Another electrical mystery now DSL, David Scheidt, 23:31
RE: Another electrical mystery now DSL, Randall, 22:05
Re: Another electrical mystery now DSL, Bill Rabel, 21:26
Re: Another electrical mystery now DSL, David C., 20:43
RE: 2 new links on my website., eric, 17:11
Re: Radiator Plumbing Question, Jim Franklin, 15:47
Re: Radiator Plumbing Question, Steve Budde, 15:24
Re: Radiator Plumbing Question, Jim Franklin, 14:50
Radiator Plumbing Question, Steve Budde, 14:29
nuts and bolts..., John Niolon, 13:20
RE: 2 new links on my website., Randall, 11:20

October 19, 2005

Re: 2 new links on my website., Eric, 11:42
Re: 2 new links on my website., Elton Clark, 10:43
2 new links on my website., Eric, 08:05
Re: Painting my house in a hurry, Bill Gilroy, 08:01
Re: Painting my house in a hurry, Karl Vacek, 06:49

October 18, 2005

Painting my house in a hurry, Bill Gilroy, 23:10
Re: Nuts and bolts, LSAPEX, 09:25
RE: Bagging grass w/riding mower, Mark Andy, 08:33
Re: Nuts and bolts, Mark Andy, 08:31
Re: Bagging grass w/riding mower (but turned into a 101 class, Eric, 07:42
Re: Bagging grass w/riding mower, nick brearley, 02:37

October 17, 2005

Re: Nuts and bolts, Elton Clark, 22:00
RE: Bagging grass w/riding mower, Rich White, 21:09
Re: Nuts and bolts, Chris Kantarjiev, 21:09
Re: Nuts and bolts, David C., 20:43
Re: Bagging grass w/riding mower, Mark Andy, 19:12
Re: Bagging grass w/riding mower, ericm, 18:26
Re: Bagging grass w/riding mower, Jeff Cocking, 16:59
Bagging grass w/riding mower, Mark Andy, 16:12
Re: Nuts and bolts, Kai M. Radicke, 15:54
RE: Second Chance/Halloween Party, Gordie's Garage, 15:53
Second Chance/Halloween Party, Eric, 11:58
Re: Nuts and bolts, LSAPEX, 09:20
Re: Nuts and bolts, Pat Horne, 08:42
Nuts and bolts, Eric, 07:11

October 16, 2005

Re: Another electrical mystery, Karl Vacek, 19:35
Re: desiccant, doug, 17:58
desiccant, Skip Albright, 17:15
Re: Another electrical mystery, E. John Puckett, 16:23
Re: Another electrical mystery, Bill Rabel, 15:41
RE: Another electrical mystery, ejrussell@mebtel.net, 14:30
Another electrical mystery, David C., 13:52

October 15, 2005

Re: Removing a linoleum floor, Patricia Lane, 06:27
Re: Removing a linoleum floor, Steve Dillen, 00:15

October 14, 2005

RE: Removing a linoleum floor, Randall, 23:20
Re: Removing a linoleum floor, John Miller, 23:00
Re: Removing a linoleum floor, Jim Franklin, 21:41
Re: Removing a linoleum floor, E. John Puckett, 21:37
Removing a linoleum floor, Bill Gilroy, 21:04
Re: Tool names., Bill Rabel, 15:49
Re: Tool names., Bill Rabel, 15:48
RE: Tool names., Steven Trovato, 12:00
Re: Sticking rubber to rubber, Pat Horne, 11:38
RE: Sticking rubber to rubber, Randall, 09:50
RE: Tool names., Randall, 09:37
Re: Tool names., bn1, 08:51
Re: Sticking rubber to rubber, Karl Vacek, 08:31
Re: Sticking rubber to rubber, John Niolon, 08:25
Re: Tool names., Mark Andy, 07:58
Tool names., bn1, 07:14
Re: Sticking rubber to rubber, ejrussell, 07:02
Sticking rubber to rubber, Eric, 07:01
Re: Tool names., ejrussell, 06:57
Re: FW: FS Twin Post 9000LB Lift, eric, 01:44

October 13, 2005

FW: FS Twin Post 9000LB Lift, Kai M. Radicke, 22:01
very small utility trailer -- follow-up, Rich White, 18:29
Re: Modern Marvels, Peter Murray, 14:45
Re: Modern Marvels, Steven Trovato, 13:51
Auto Zone, Wayne, 12:34
Re: tire goo, David Hillman, 12:08
Re: tire goo, Eric, 11:45
Re: Modern Marvels, David Scheidt, 11:16
Re: tire goo, E. John Puckett, 10:56
Re: tire goo, David Hillman, 10:27
tire goo, Eric, 09:34
Modern Marvels, Eric, 09:31
Re: looking for mig welder, Mark Andy, 08:42
Re: Re: mig welders, jblair1948, 05:05

October 12, 2005

Re: mig welders, John Miller, 21:11
Re: mig welders, Richard P. Welty, 19:07
Re: mig welders, Paul Parkanzky, 18:59
Re: mig welders, Chris Kantarjiev, 18:34
Re: looking for mig welder, David Scheidt, 18:05
mig welders, john niolon, 18:04
looking for mig welder, Chris Kantarjiev, 17:30
Re: HEPA filter problem, E. John Puckett, 16:59
HEPA filter problem, Larry Spector, 12:21
Re: very small utility trailer, David Scheidt, 11:57
Re: very small utility trailer, Eric, 11:51
Re: very small utility trailer, LSAPEX, 10:22
Re: very small utility trailer, David Hillman, 09:53
Re: very small utility trailer, LSAPEX, 09:11
Re: very small utility trailer, Steve Hammatt, 08:46
Re: very small utility trailer, LSAPEX, 06:13

October 11, 2005

RE: very small utility trailer, Randall, 23:05
Re: very small utility trailer, Tony Vaccaro, 21:30
Re: very small utility trailer, Eric J Russell, 20:55
Re: very small utility trailer, eric, 20:22
Re: very small utility trailer, philip ethier, 20:01
RE: very small utility trailer, Randall, 19:24
Re: very small utility trailer, John T. Blair, 19:12
Re: very small utility trailer, E. John Puckett, 19:04
very small utility trailer, Rich White, 18:49
Re: decorative concrete, John P. New, 13:46
Re: decorative concrete, Eric, 13:23
Re: decorative concrete, John P. New, 12:51
Re: decorative concrete, Eric, 12:09
Re: decorative concrete, Steven Trovato, 12:05
Re: decorative concrete, Mike Lee, 11:06
Re: decorative concrete, Karl Vacek, 08:46
Re: decorative concrete, Mark Andy, 07:47

October 10, 2005

Re: decorative concrete, David Scheidt, 22:41
Re: decorative concrete, Mark Andy, 22:09
decorative concrete, Mark Andy, 21:19
Re: Concrete Curing Time, scott.hall, 20:07
Re: Concrete Curing Time, Keith Turk, 16:09
Re: Concrete Curing Time, Eric J Russell, 14:24
Re: Concrete Curing Time, Bill Engle, Sr., 14:19
Re: Concrete Curing Time, John P. New, 14:00
Re: Concrete Curing Time, Dick Atkinson, 13:44
Concrete Curing Time, Derek Harling, 12:41
RE: cleaning concrete, Randall, 12:32
RE: cleaning concrete, John Niolon, 11:47
cleaning concrete, John Niolon, 09:18

October 08, 2005

Re: plowing, WOW?, David Scheidt, 17:25
Re: plowing, WOW?, eric, 13:47
Re: plowing, WOW?, Don Malling, 07:00
Re: plowing, WOW?, Todd Walke, 00:37

October 07, 2005

bending steel, Mike Rambour, 19:16
Re: plowing, WOW?, Bill Engle, Sr., 12:16
Re: plowing, WOW?, Eric, 11:28
Re: plowing, WOW?, Nolan Penney, 09:25
Re: plowing, WOW?, Timothy R. Hoerning, 09:18
plowing, WOW?, Eric, 08:53

October 06, 2005

Re: Installing central a/c, David Scheidt, 22:34
Re: Vent Pipe, John Miller, 22:11
Vent Pipe, BOB Nogueira, 19:54
Re: Harbor Freight Bandsaw, doug, 06:25
Re: Installing central a/c, Michael Lye, 05:51
Re: Installing central a/c, PJ McGarvey, 05:39

October 05, 2005

Re: Installing central a/c, philip ethier, 23:12
Installing central a/c, Peter Schauss, 21:00
Re: more saw blade ??s, Kai M. Radicke, 11:22
Re: Fw: more saw blade ??s, Karl Vacek, 10:10
Re: Fw: more saw blade ??s, John Miller, 09:35
Re: more saw blade ??s, Wayne, 09:20
Fw: more saw blade ??s, Karl Vacek, 08:55
generac generators, John Niolon, 08:44
donations?, Eric J Russell, 08:43
Re: Harbor Freight Bandsaw, Eric, 08:14
RE: Painting a house in a hurry, Eric, 08:06
Re: more saw blade ??s, Pat Horne, 08:02

October 04, 2005

more saw blade ??s, Skip Albright, 20:39
Re: Harbor Freight Bandsaw, Steve Shipley, 20:09
Re: Harbor Freight Bandsaw, Chadwick E. Labno, 16:47
Harbor Freight Bandsaw, Eugene D Abbondelo, 15:24
Re: Painting a house in a hurry, Eric J Russell, 10:53
RE: Painting a house in a hurry, Mullen, Tim \(IIS\), 09:15
Re: Painting a house in a hurry, Eric, 05:34

October 03, 2005

Re: Painting a house in a hurry, David C., 21:02
Re: Painting a house in a hurry, Jim Juhas, 20:16
Re: misbehaving Starrett digital caliper, Dave & M, 19:05
Re: misbehaving Starrett digital caliper, Richard P. Welty, 18:42
Re: misbehaving Starrett digital caliper, Chris Kantarjiev, 18:16
Re: Painting a house in a hurry, Eric J Russell, 18:12
misbehaving Starrett digital caliper, Richard P. Welty, 17:40
Re: Painting a house in a hurry, John T. Blair, 16:04
RE: Painting a house in a hurry, Randall, 15:43
Re: Painting a house in a hurry, Karl Vacek, 13:03
Re: Painting a house in a hurry, Bill Gilroy, 12:45
RE: Painting a house in a hurry, Randall, 12:06
Re: Painting a house in a hurry, Karl Vacek, 12:00
Painting a house in a hurry, Bill Gilroy, 11:21

October 02, 2005

Re: gasket material? (Thanks to everyone), Steve Hammatt, 10:13