On Apr 9, 2009, at 9:57 PM, Andrew Payne wrote:
> I have been removing parts, with much frustration. Several parts
> have come
> off only with the use of my 24 tooth per inch "screw driver".
> WD-40 is not
> enough.
Drew,
WD40 is not a good product for removing rusted parts. In fact, WD40
was designed to displace water and to protect parts from rusting, not
to remove rusted parts. That's what the WD stands for; Water
Displacement, (40th formula).
You will have much better results with PB Blaster or Busty.
Kevin V.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|