List,
Thank you for your help! I just picked up a can of PB Blaster, a popular
recommendation, and in stock at the local MG'er owned parts store. I hope
this will help. However, there are several flaws in my technique that may
be even more important to fix:
Coating the fasteners AFTER installation for next time - thanks Guy
There may be a way to use electrolytic process in place - thanks Kevin
Careful use of a torch may work - Frank I'll call when I burn he parts up ;)
Tighten the loosen patiently - thanks Ed
Home Brew ATF - Acetone mix may work the best - thanks William
Finally, Ed made me realize what I had suspected for some time, that I just
need to drink more beer! Perhaps the OTHER home brew will work well for
that.
Cheers
Drew
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|