Andrew Payne wrote:
> I have been removing parts, with much frustration. Several parts have come
> off only with the use of my 24 tooth per inch "screw driver". WD-40 is not
> enough. Any suggestions on techniques to free rusty screws and bolts? I
> have heard to use a blow torch, but was afraid to use one on lights and
> such. Please help, I am tired of the hacksaw.
>
A torch, but remove the plastic lights first.
Also WD40 doesn't do much, get some PB Blaster, Busty, or at least
liquid wrench.
--
Frank Clarici
Toms River, NJ
My own Fleet of Sprites
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|