vintage-race
[Top] [All Lists]

Re: clutch rebuilding

To: "Richard E. Buckingham, Jr." <rebjrmd@ix.netcom.com>
Subject: Re: clutch rebuilding
From: Jim Hayes <hayes@mediaone.net>
Date: Sat, 14 Oct 2000 21:36:40 -0400
I believe you will find inertia is a big issue when it comes to
flywheels. The heavier the flywheel, the more power it takes to
accellerate it to higher RPM. A lighter flywheel will allow faster
accelleration - you can feel the difference in the lower gears. 
Jim 

"Richard E. Buckingham, Jr." wrote:
> I have serious doubts whether modern
> clutches are a performance enhancement with the following caveat:  if it 
>allows a
> more highly tuned engine to turn higher RPM's than it would have been capable
> with what was allowed in the era or if it allows a more powerful engine to get
> its power to the driveline without self-destructing than I would consider it
> "performance enhancing."
-- 
Jim Hayes                  Fotec/Cable U
hayes@mediaone.net         http://www.CableU.net
jeh@fotec.com              http://www.fotec.com/
All generalizations, with the possible exception of this one, are false!

<Prev in Thread] Current Thread [Next in Thread>