DrMayf, yes, the only thing changed was the starter, no wires changed
that would effect, or is that affect, the problem. This was the
starting point of my problem, and of course any change is the first
place you look to solve a new problem. But, again this was not the
solution to the problem.
One day, and you guys are getting smarter, and closer.
Larry
DrMayf wrote:
> Ok, I bumfuzzled about this whole thing of guessing. My assumption was that
> the only thing that waas changed was the starter for one of those hi-torque
> gizmos. But it seems like we have delved far and wide for the answers. Was
> the car running correctly before changing the starter? Did you disconnect
> all the wiring in the car? If you only changed the starter, then that should
> have been only the large power lead from the starter to the solenoid. Shold
> not have had to remove any other wiring. Were you required to change any
> other item? If so, then the playing field is not level...
>
> mayf
> ----- Original Message -----
> From: "P. R. Hulse" <phulse@gte.net>
> To: "Larry Paulick" <larry.p@erols.com>
> Cc: "Tiger Mailing List" <tigers@autox.team.net>
> Sent: Friday, September 06, 2002 7:51 AM
> Subject: Re:Guess the Problem
>
>
>
#################################################################
#################################################################
#################################################################
#####
#####
#####
#################################################################
#################################################################
#################################################################
|