shop-talk (date)

August 31, 2004

car ramps - solution, john niolon, 19:24
RE: uses for 8 pt sockets, Randall, 17:14
Re: uses for 8 pt sockets, Mike Sloane, 15:45
RE: uses for 8 pt sockets, Joe Szwed, 13:16
RE: uses for 8 pt sockets, Mullen, Tim (IIS), 13:14
Re: car ramps, Lawrence R Zink, 13:07
Re: uses for 8 pt sockets, Mark Andy, 12:15
RE: car ramps, Steven Trovato, 11:25
RE: 8pt sockets, Randall, 11:25
RE: 8pt sockets, Mullen, Tim (IIS), 09:34
uses for 8 pt sockets, John Niolon, 09:29
Re: 8pt sockets, David Scheidt, 09:19
RE: 8pt sockets, Mark Andy, 08:18

August 30, 2004

RE: 8pt sockets, Randall, 23:26
Re: 8pt sockets, Steve Hammatt, 21:37
RE: car ramps, David C., 21:32
Re: Framing nailers, HF or other, David C., 21:29
Re: 8pt sockets, David Scheidt, 20:43
Finish Nailers, was, Re: Framing nailers, HF or other, Jim Juhas, 20:20
Re: Framing nailers, HF or other, Elton Clark, 20:07
Re: 8pt sockets, Elton Clark, 19:53
RE: 8pt sockets, Randall, 19:10
8 pt sockets, john niolon, 19:08
8pt sockets, Frank Vantacich, 18:53
RE: car ramps, Randall, 16:20
Re: Framing nailers, HF or other, Karl Vacek, 16:18
Re: Framing nailers, HF or other, Elton Clark, 14:16
RE: Framing nailers, HF or other, Mullen, Tim (IIS), 14:01
Re: Framing nailers, HF or other, Karl Vacek, 13:49
Re: car ramps, Mark Andy, 13:17
Re: car ramps, FRED E THOMAS, 13:02
RE: car ramps, Mullen, Tim (IIS), 12:57
Re: Framing nailers, HF or other, PJ McGarvey, 12:25
Re: car ramps, Eric Murray, 12:07
Re: Framing nailers, HF or other, Jim Juhas, 11:57
car ramps, John Niolon, 11:23
RE: Generator help, Randall, 11:20
Generator help, Jim Juhas, 10:41
Framing nailers, HF or other, PJ McGarvey, 09:51

August 29, 2004

Re: greasey hands, Richard Beels, 15:44

August 28, 2004

RE: Fluorescent light problem, Randall, 18:07
RE: greasey hands, SwampFox, 09:54
Re: greasy hands, Derek, 08:32
greasey hands, FRED E THOMAS, 07:24
Re: Fluorescent light problem, Mark and Susan Miller, 00:44

August 27, 2004

Re: Fluorescent light problem, Derek, 22:45
Fluorescent light problem, Karl Vacek, 21:09
Looking for mower clutch, Marty Sukey, 20:15

August 26, 2004

Re: gutters, scott.hall, 15:24
Re: gutters, Jim Juhas, 07:47
Re: gutters, Eric, 07:17

August 25, 2004

Re: gutters, E. John Puckett, 20:08
rainhandler, Chris Kantarjiev, 19:17
gutters, John T. Blair, 18:54

August 23, 2004

Re: Mixture woes, Michael Lowe, 18:54
Re: Mixture woes, David Scheidt, 16:37

August 19, 2004

Re: belt sanding - another question, David C., 20:42
Re: belt sander for metal work, John T. Blair, 15:51
Re: belt sander for metal work, Chadwick E. Labno, 12:27
belt sanding - another question, John Niolon, 12:09
Re: belt sander for metal work, pethier, 11:46
Re: belt sander for metal work, Elton Clark, 11:43
Re: belt sander for metal work, Jim Juhas, 10:48
belt sander for metal work, John Niolon, 09:32

August 18, 2004

Sorry about that.., Chris K, 20:39
OT - No LBC - Delete if you're not interested, Chris K, 19:20

August 17, 2004

Re: Ballast Question, Mark and Susan Miller, 22:31
Re: dumb electricity question, Steven Trovato, 21:32
Re: dumb electricity question, David C., 21:09
Re: dumb electricity question, Steven Trovato, 15:31
Re: covenants, Bill Engle, Sr., 12:35

August 16, 2004

Re: dumb electricity question, Eric J Russell, 19:14
Re: covenants, Scott Hall, 19:12
Re: Ballast Question, Eric J Russell, 16:30
Re: So Anyway, Pioneer, Rush, 15:45
Re: So Anyway, Pioneer, orphancars, 15:44
Ballast Question, Rush, 15:22
Re: Pioneer Steel Buildings, Rush, 15:05
So Anyway, Pioneer, Rush, 15:00
Covenants (Oy! Look what I started!), Rush, 14:57
RE: covenants (Part 1), Mullen, Tim (IIS), 14:30
Re: covenants (Part 1), Trevor Boicey, 13:17
Re: covenants (Part 1), Eric Murray, 13:00
Re: covenants (Part 1), Bill Engle, Sr., 12:57
COVENANTS AND EASEMENTS AND AGENTS.... OH MY !!, John Niolon, 12:32
Re: covenants (Part 2), Kai M. Radicke, 12:27
Re: covenants (Part 1), Kai M. Radicke, 12:25
RE: Easements & Covenants - was - Pioneer Steel Buildings, Randall, 12:24
dumb electricity question, Mark Andy, 12:11
Re: Pioneer Steel Buildings, Nolan Penney, 11:44
Re: Pioneer Steel Buildings, Mike Sloane, 11:01
Re: covenants, Kai M. Radicke, 10:33
Re: Pioneer Steel Buildings, E. John Puckett, 10:11
RE: Pioneer Steel Buildings, Randall, 09:45
RE: Pioneer Steel Buildings, Mullen, Tim (IIS), 08:50
Re: Pioneer Steel Buildings, Steve Hammatt, 08:27
Re: covenants, Nolan Penney, 08:06
RE: Pioneer Steel Buildings, Mullen, Tim (IIS), 08:01
Re: covenants, Eric, 07:30

August 15, 2004

Re: covenants, Bob Kegel, 20:31
Re: covenants, David Scheidt, 10:36
Re: covenants, Steve Shipley, 09:44
Re: covenants, FRED E THOMAS, 05:32

August 14, 2004

Re: Pioneer Steel Buildings, Steve Shipley, 18:47
Re: Pioneer Steel Buildings, Steve Hammatt, 18:33
covenants, Steve Shipley, 18:28
Re: Fuel system replacement, tank to block, efi gm 350, Hard Hat, 16:57
Re: Pioneer Steel Buildings, Rush, 16:29
Re: Pioneer Steel Buildings, Steve Shipley, 15:38
Pioneer Steel Buildings, Rush, 13:48

August 13, 2004

Re: HF, Karl Vacek, 20:46
Re: HF, David Scheidt, 20:32
Re: HF, Mark Andy, 20:11
Re: HF, Bill Rabel, 19:00
Re: Keeping mice out of the shed, orphancars, 15:14
Re: Keeping mice out of the shed, Steven Trovato, 14:45
Re: HF, Eric, 13:29
Re: HF, Nolan Penney, 12:00
Re: Keeping mice out of the shed, Phil Ethier, 11:04
Re: HF, Karl Vacek, 10:53
RE: HF, Randall, 10:32
Re: HF, bn1, 09:27
Re: HF, Ian, 07:49
Re: HF, E. John Puckett, 07:41

August 12, 2004

HF, Mark and Susan Miller, 23:46
RE: Safety wire @ HF, Randall, 12:13
Re: Blasting Sand, Don Malling, 11:26
RE: Keeping mice out of the shed, Mullen, Tim (IIS), 11:25
Re: Block Wall Damage, Ian, 10:57
RE:Safety wire @ HF, Mark Andy, 10:56
Re: Keeping mice out of the shed, Paul Parkanzky, 10:13
Block Wall Damage, john matthews, 09:25
RE: Keeping mice out of the shed, Mullen, Tim (IIS), 09:14
RE: Fuel system replacement, tank to block, efi gm 350, Ian, 09:12
Re: Fuel system replacement, tank to block, efi gm 350, Eric J Russell, 08:56
Re: trip, was, Re: hello?, Rex Burkheimer, 07:35
Need a pulley, Rex Burkheimer, 07:28
Fuel system replacement, tank to block, efi gm 350, Matt Wehland, 07:15
RE:Safety wire @ HF, Randall, 00:06

August 11, 2004

Re: Keeping mice out of the shed, Rich White, 21:28
Re: trip, was, Re: hello?, David Scheidt, 20:40
trip, was, Re: hello?, Scott Hall, 19:41
Re: Keeping mice out of the shed, FRED E THOMAS, 17:14
Re: Keeping mice out of the shed, Chris K, 17:11
Re: Keeping mice out of the shed, Eric Murray, 16:49
RE: Keeping mice out of the shed, Ron Schmittou, 16:21
Keeping mice out of the shed, Mullen, Tim (IIS), 15:57
RE: hello?, Swamp Fox, 15:46
Re: hello?, FRED E THOMAS, 15:42
Re: hello?, Mike Sloane, 15:25
Re: hello?, John T. Blair, 14:57
Re: hello?, Michael Lowe, 14:20
hello?, Rex Burkheimer, 12:57
Re: Radial arm saw blade (kinda long), Bob Hare, 05:05

August 10, 2004

Radial arm saw blade (kinda long), David C., 21:57

August 06, 2004

Re: Cleaning master cylinder reservoir, Nolan Penney, 05:03

August 05, 2004

Re: Copper Brake Lines, Jim Juhas, 20:32
Re: Mounting a compressor, Scott Hall, 19:16
Re: Copper Brake Lines, David Scheidt, 16:23
RE: Yet more copper talk ..., Mullen, Tim (IIS), 16:16
Yet more copper talk ..., Arvid Jedlicka, 15:05
Re: Copper Brake Lines, Kai M. Radicke, 14:34
Re: Copper Brake Lines, Dave & Marlene, 14:18
RE: Cleaning master cylinder reservoir, Randall, 14:09
Re: Cleaning master cylinder reservoir, ejrussell, 13:44
Re: Copper Brake Lines, Mike Rambour, 13:24
RE: Copper Brake Lines, Randall, 13:12
RE: Copper Brake Lines, Mullen, Tim (IIS), 13:03
Cleaning master cylinder reservoir, PJ McGarvey, 12:39
Re: Copper Brake Lines, Chris Kantarjiev, 12:21
Copper Brake Lines, Jim Juhas, 11:51

August 04, 2004

Re: powder coating ovens, Wayne, 15:29
shop-talk@autox.team.net, Jim Marton Jr, 15:04
RE: powder-coat, Wayne, 13:00
RE: powder-coat, Patton Dickson, 11:49
RE: getting rid of gecko lizards, Mullen, Tim (IIS), 11:43
Re: Canon scanner cartridge, Elton Clark, 11:15
powder-coat, FRED E THOMAS, 11:14
Re: OT (not MG/Shop related) Canon scanner cartridge, E. John Puckett, 10:23
Re: Canon scanner cartridge, Karl Vacek, 09:32
Re: Canon scanner cartridge, Rush, 08:51
Re: Canon scanner cartridge, Nolan Penney, 07:02
Re: Canon scanner cartridge, Mike Sloane, 05:25
Re: Canon scanner cartridge, bn1, 01:39

August 03, 2004

Canon scanner cartridge, TONY CLARK, 22:56
Re: OT (not MG/Shop related) Canon scanner cartridge, wmc_sr20, 20:54
OT (not MG/Shop related) Canon scanner cartridge, Eric J Russell, 19:39
Re: Mounting a compressor, Ian, 09:08
Re: Quiet Air Conditioning, Ian, 09:00
Re: Mounting a compressor, CHRIS KOTTING, 06:57
RE: Mounting a compressor, Larry Spector, 05:26

August 02, 2004

RE: Lawn roller, Larry list account, 23:44
Re: Mounting a compressor, Steve Hammatt, 23:11
Re: One last thing about blasting cabinets and safety, Steven Trovato, 23:04
Lawn roller, David C., 22:50
One last thing about blasting cabinets and safety, William M. Gilroy, 21:41
Re: Quiet Air Conditioning, Rush, 21:22
Re: Quiet Air Conditioning, Scott Hall, 20:05
Re: Mounting a compressor, Scott Hall, 19:43
Re: Mounting a compressor, Karl Vacek, 13:05
Sound Deadening (was: Mounting a compressor), Wayne, 12:56
Re: Mounting a compressor, Rush, 12:03
Re: Mounting a compressor, Elton Clark, 11:20
Re: Mounting a compressor, Mike Sloane, 10:34
Re: Mounting a compressor, Steve Hammatt, 09:02
Mounting a compressor, Ian, 07:29

August 01, 2004

Re: Quiet Air Conditioning, Lawrence R Zink, 14:10
RE: Blasting Sand (long, off-topic, pt 2), Randall, 09:55
RE: Blasting Sand (long, off-topic, pt 1), Randall, 09:52
Re: Quiet Air Conditioning, Derek, 07:00