shop-talk (date)
October 31, 2001
- RE: does 240 = 120 + 120 ?, Randall Young, 18:26
- RE: does 240 = 120 + 120 ?, Randall Young, 18:10
- Re: does 240 = 120 + 120 ?, Kevin Sullivan, 15:52
- Re: does 240 = 120 + 120 ?, Tim Mullen, 15:13
- Re: does 240 = 120 + 120 ?, Bruce Wolfe, 11:17
October 19, 2001
- RE: Results of powder-coating polished brass, Lee Daniels, 16:01
- RE: building a shop - radiant heat, Madurski, Ronald M., 14:37
- Barn for sale, epetrevich, 13:09
- Re: building a shop, Derek Harling, 12:43
- Re: building a shop, Phil Ethier, 11:47
- Re: building a shop, Stan Fickes, 09:05
- Re: building a shop, Nolan Penney, 08:59
- Re: building a shop, epetrevich, 08:36
- Re: building a shop, epetrevich, 08:16
- RE: Metal marking, Flemming Larsen, 03:30
- Re: building a shop - radiant heat, Lawrence R Zink, 00:34
- Re: building a shop, Lawrence R Zink, 00:31
October 18, 2001
- Re: building a shop, Phil Ethier, 22:32
- Re: Metal marking, Elton Clark, 22:01
- Re: building a shop, Elton Clark, 21:28
- Re: building a shop, Elton Clark, 21:09
- RE: building a shop - radiant heat, Kim Knapp, 19:08
- Got three phase power in for the compressor, Kim Knapp, 19:08
- Re: Results of powder-coating polished brass, JGN, 19:03
- Re: building a shop - radiant heat, Richard Welty, 17:52
- RE: Metal marking, Gerald Brazil, 17:40
- RE: Metal marking, Landaiche Kenneth (NET-BBS/Petaluma), 17:34
- RE: building a shop - radiant heat, Landaiche Kenneth (NET-BBS/Petaluma), 17:20
- Re: Results of powder-coating polished brass, Randall, 17:18
- RE: monarch lathe?, jmark.vanscoter, 17:13
- Re: Metal marking, Randall, 16:58
- Results of powder-coating polished brass, Lee Daniels, 16:45
- Re: Metal marking, Mark J Bradakis, 16:42
- Re: building a shop, Keith Turk, 16:28
- Metal marking, Landaiche Kenneth (NET-BBS/Petaluma), 15:53
- RE: building a shop - radiant heat, Madurski, Ronald M., 14:28
- driveway sealer, Duncan, Brian, 13:23
- monarch lathe?, Scott Hall, 13:02
- RE: building a shop - radiant heat, Phil Ethier, 11:56
- RE: building a shop - radiant heat, Madurski, Ronald M., 09:32
- Re: building a shop, epetrevich, 08:29
- Re: building a shop - radiant heat, Rex Burkheimer - WM, 08:12
- Re: building a shop, Stan Fickes, 08:07
- Re: building a shop, Phil Ethier, 06:40
October 17, 2001
- Re: building a shop - radiant heat, Randall, 23:50
- Re: building a shop, Elton Clark, 22:48
- RE: Tractors and Brit Cars was New Subject ( wasn't anything), jmark.vanscoter, 22:42
- Re: building a shop - radiant heat, Phil Ethier, 22:09
- Re: building a shop, Duncan120, 21:57
- WTB Tractor Engined TR2-3 or AH, Duncan120, 21:46
- RE: building a shop - radiant heat, Kim Knapp, 21:01
- Re: Tractors and Brit Cars was New Subject ( wasn't anything), Phil Ethier, 21:00
- RE: Tractors and Brit Cars was New Subject ( wasn't anything), jmark.vanscoter, 21:00
- Re: building a shop - radiant heat, Phil Ethier, 20:48
- Re: building a shop - radiant heat, Martin Scarr, 20:22
- Re: building a shop, john, 16:40
- Re: building a shop - radiant heat, Rex Burkheimer - WM, 15:51
- RE: building a shop - radiant heat, jmark.vanscoter, 15:47
- FW: building a shop - radiant heat, Gil Fuqua, 15:23
- Re: building a shop - radiant heat, Rex Burkheimer - WM, 15:02
- Re: Tractors and Brit Cars was New Subject ( wasn't anything), Elton Clark, 14:19
- Re: Tractors and Brit cars, Elton Clark, 14:04
- Re: building a shop - radiant heat, Eric Murray, 13:38
- Re: building a shop - radiant heat, Mike Sloane, 12:59
- Re: Tractors and Brit cards (was New Subject ( wasn't anything), jmark.vanscoter, 12:55
- Re: building a shop - radiant heat, Brian Kennedy, 12:55
- RE: Tractors and Brit Cars was New Subject ( wasn't anything), jmark.vanscoter, 12:36
- Re: New Subject ( wasn't anything), Elton Clark, 12:22
- Re: building a shop (followup), Mark J Bradakis, 12:02
- RE: New Subject ( wasn't anything), jmark.vanscoter, 10:39
- Re: building a shop, Keith Turk, 10:15
- Re: building a shop, Phil Ethier, 09:40
- Re: building a shop, epetrevich, 09:37
- Re: New Subject ( wasn't anything), Mike Sloane, 09:18
- Re: Central Pneumatic, Erik Quackenbush, 09:14
- Re: ?Auto Factory Tours?, Erik Quackenbush, 09:11
- Here is a shop to emulate, Rush, 08:52
- Central Pneumatic, Brian Reynolds, 08:10
- Re: building a shop, Rex Burkheimer - WM, 07:46
- Re: ?Auto Factory Tours?, Brian Reynolds, 07:35
- building a shop (followup), Richard Welty, 07:29
- RE: building a shop - radiant heat, Dave Scarlett, 06:39
- Re: building a shop - radiant heat, Keith Turk, 06:23
October 16, 2001
- Re: New Subject ( wasn't anything), Phil Ethier, 23:24
- Re: New Subject ( wasn't anything), Elton Clark, 23:17
- Re: ?Auto Factory Tours?, Trevor Boicey, 22:42
- Re: building a shop, JGN, 21:10
- RE: building a shop, jmark.vanscoter, 20:09
- RE: New Subject ( wasn't anything), jmark.vanscoter, 19:45
- Report Back on Shrinking sheetmetal, BOB NOGUEIRA, 19:41
- Re: ?Auto Factory Tours?, Steven Trovato, 19:29
- building a shop, Richard Welty, 19:00
- RE: ?Auto Factory Tours?, Randall Young, 18:57
- Re: New Subject ( wasn't anything), DickShaler, 18:46
- Re: New Subject ( wasn't anything), Stan Fickes, 18:27
- Re: New Subject ( wasn't anything), Elton Clark, 16:49
- Re: ?Auto Factory Tours?, Elton Clark, 16:05
- RE: ?Auto Factory Tours?, Phil Ethier, 16:01
- RE: ?Auto Factory Tours?, Gil Fuqua, 15:18
- RE: ?Auto Factory Tours?, Randall Young, 15:18
- RE: Wood stove for shop, Randall Young, 15:13
- RE: ?Auto Factory Tours?, Gil Fuqua, 14:53
- Re: Exhaust systems, Larry Hoy, 14:23
- Re: ?Auto Factory Tours?, Richard Welty, 14:17
- RE: Wood stove for shop, Dave Munroe, 14:17
- Re: ?Auto Factory Tours?, epetrevich, 14:13
- Re: Exhaust systems, Bill Engle, Sr., 13:46
- RE: Exhaust systems, Chris Kantarjiev, 13:39
- RE: Exhaust systems, Mike Rambour, 13:28
- Re: ?Auto Factory Tours?, Rex Burkheimer - WM, 13:13
- Re: ?Auto Factory Tours?, Brian Reynolds, 13:03
- Re: ?Auto Factory Tours?, Richard Welty, 13:02
- Re: ?Auto Factory Tours?, Elton Clark, 12:45
- Re: ?Auto Factory Tours?, Mark J Bradakis, 12:36
- Re: Exhaust systems, Eric Murray, 12:32
- RE: Exhaust systems, Randall Young, 12:28
- RE: ?Auto Factory Tours?, Mitchell, Doug (D.B.), 12:22
- Re: Exhaust systems, Chris Kantarjiev, 12:13
- Re: Exhaust systems, Neil Sherry, 12:03
- Re: Exhaust systems, Chris Kantarjiev, 11:52
- Exhaust systems, Neil Sherry, 11:51
- Re: ?Auto Factory Tours?, JNiolon, 11:44
- ?Auto Factory Tours?, Brian Reynolds, 11:04
- RE: Wood stove for shop, Randall Young, 10:12
- Re: Wood stove for shop, Dave Munroe, 09:36
- Re: Wood stove for shop, Phil Ethier, 06:24
October 15, 2001
- Re: Wood stove for shop, Phil Ethier, 21:21
- RE: Source for used metal working equipment?, Randall Young, 19:10
- Re: Wood stove for shop, Steven Trovato, 19:06
- Re: Source for used metal working equipment?, Bruce Wolfe, 16:38
- Re: Wood stove for shop, Phil Ethier, 12:12
- Re: Wood stove for shop, Eric Murray, 10:41
- Re: Hey all..., LBC286, 09:07
- Re: Three phase power factor correction device, Donald H Locker, 08:01
- Re: Three phase power connections (was Re: 208v Air, Donald H Locker, 07:55
- Three phase power factor correction device, Timothy R. Hoerning, 07:15
- Re: Three phase power connections (was Re: 208v Air, Timothy R. Hoerning, 07:09
- Re: Wood stove for shop, Timothy R. Hoerning, 07:03
October 14, 2001
- Re: Public Apology - was: Three phase power connections, Donald H Locker, 18:49
- Re: Wood stove for shop, Wayne, 13:34
- Re: Wood stove for shop, Brian Kennedy, 08:06
- Re: Wood stove for shop, Lee S. Mairs, 07:53
- Re: New Subject ( wasn't anything), Phil Ethier, 06:44
- Re: Wood stove for shop, Dave Munroe, 06:00
- Re: New Subject ( wasn't anything), Mike Sloane, 04:59
- New Subject ( wasn't anything), Keith Turk, 04:26
- Public Apology - was: Three phase power connections, Flemming Larsen, 02:39
October 13, 2001
- 208-230VC step up xfmr (was: what is 3 phase, 2 phase, 6 phase, Susan and Mark Miller, 23:47
- Re: Source for used metal working equipment?, Phil Ethier, 19:51
- Re: Source for used metal working equipment?, David Cole, 19:48
- Re: Certified Electrician to pick out a compressor??, Donald H Locker, 19:37
- Re: OK, here is what my 208v really is:, Donald H Locker, 19:14
- Re: Wood stove for shop, Kai M. Radicke, 19:13
- Re: Wood stove for shop, Dave Munroe, 18:34
- Re: Level flooring (was RE: new member Keith), TONY CLARK, 17:59
- Certified Electrician to pick out a compressor??, Kim Knapp, 17:43
- Re: Wood stove for shop, Lee S. Mairs, 14:30
- Re: Wood stove for shop, Phil Ethier, 12:59
- Source for used metal working equipment?, David Cole, 12:39
- Re: Three phase power connections (was Re: 208v Air, Donald H Locker, 11:56
- Wood stove for shop, Wayne, 11:53
- Re: Three phase power connections (was Re: 208v Air, Donald H Locker, 11:46
- Re: OK, here is what my 208v really is:, Donald H Locker, 11:35
- Re: Level flooring (was RE: new member Keith), Scott Hall, 09:30
- RE: OK, here is what my 208v really is:, Kim Knapp, 09:21
- RE: OK, here is what my 208v really is:, Kim Knapp, 09:16
- Re: Level flooring (was RE: new member Keith), Rex Burkheimer - WM, 08:03
- Re: OK, here is what my 208v really is:, Keith Turk, 03:40
- RE: Three phase power connections (was Re: 208v Air, Flemming Larsen, 03:05
- Re: 208v Air Compressors, Donald H Locker, 00:32
- Re: 208v Air Compressors, Donald H Locker, 00:28
- Three phase power connections (was Re: 208v Air Compressors), Donald H Locker, 00:21
- Re: OK, here is what my 208v really is:, Randall, 00:13
October 12, 2001
- Re: OK, here is what my 208v really is:, Phil Ethier, 23:40
- Re: Level flooring (was RE: new member Keith), Scott Hall, 23:08
- OK, here is what my 208v really is:, Kim Knapp, 22:59
- Re: 208v Air Compressors, Matt, 18:40
- Re: new member Keith, Keith Turk, 16:00
- Re: 208v Air Compressors, Phil Ethier, 15:52
- Re: Level flooring (was RE: new member Keith), Bill Rabel, 15:41
- Level flooring (was RE: new member Keith), Keith Kaplan, 14:58
- Re: new member Keith, Rush, 14:53
- Re: 208v Air Compressors, Timothy R. Hoerning, 12:10
- Re: Coating brass after buffing, JNiolon, 11:41
- Re: 208v Air Compressors, Derek Harling, 11:08
- Coating brass after buffing, Lee Daniels, 11:04
- Re: New Shop, Derek Harling, 11:01
- Re: new member Keith, Ed Van Scoy, 10:45
- Re: Hey all..., Bill Rabel, 10:26
- Re: new member Keith, Keith Turk, 10:19
- welcome Keith, JNiolon, 09:34
- new member Keith, JNiolon, 09:33
- Re: Hey all..., Rex Burkheimer - WM, 09:31
- Re: 208v Air Compressors, Donald H Locker, 09:26
- Re: 208v Air Compressors, Donald H Locker, 09:24
- Test, Keith Turk, 09:20
- Hey all..., Keith Turk, 08:56
- Re: 208v Air Compressors, Timothy R. Hoerning, 07:54
- Re: 208v Air Compressors, Tim Mullen, 07:51
October 11, 2001
- Re: 208v Air Compressors, Donald H Locker, 20:14
- Re: Extreme Garages - hell any garage, Steve Budde, 19:11
- Re: Extreme Garages - hell any garage, Dave Williams, 16:55
- Re: 208v Air Compressors, Joe Flake, 14:59
- Magpie's Song, Mark J Bradakis, 09:23
October 10, 2001
- Re: 208v Air Compressors, Donald H Locker, 20:32
- Re: 208v Air Compressors, Matt, 19:53
- Re: Extreme Garages - hell any garage, Steve Budde, 18:51
- Re: Extreme Garages - hell any garage, DickShaler, 17:16
- RE: "Extreme Garages" Now Junkyard Wars, Randall Young, 17:08
- RE: Extreme Garages - hell any garage, Randall Young, 14:16
- Re: Extreme Garages - hell any garage, epetrevich, 13:24
- Re: Extreme Garages - hell any garage, Mike Sloane, 13:23
- hydrogen embrittlement, europa autocrossing, Phil Ethier, 11:10
- 208v Air Compressors, Kim Knapp, 09:41
- Re: Extreme Garages", Bill Rabel, 09:21
October 08, 2001
- Re: "Extreme Garages", Trevor Boicey, 22:59
- Using A ig welder to shrik metal, BOB NOGUEIRA, 22:22
- RE: "Extreme Garages", jmark.vanscoter, 19:09
- Re: "Extreme Garages", Mike Rambour, 18:09
- Re:Extreme Garages", BOB NOGUEIRA, 17:18
- Re: "Extreme Garages", epetrevich, 17:11
- Re: "Extreme Garages", John Viviani, 15:19
- RE: A copy of the letter, Randall Young, 15:15
- Re: "Extreme Garages", JGN, 14:39
- Re: A copy of the letter, JGN, 14:36
- Re: "Extreme Garages", Rex Burkheimer - WM, 13:41
- Re: "Extreme Garages", Patton Dickson, 12:58
- Re: A copy of the letter, JNiolon, 11:43
- Re: "Extreme Garages", Eric Murray, 11:20
- A copy of the letter, epetrevich, 11:18
- Re: "Extreme Garages", Kevin Sullivan, 11:03
- "Extreme Garages", epetrevich, 10:47
October 02, 2001
- More Sandblast cabinet suggestions requested (the topic I won't, Patton Dickson, 22:36
- frost line, Rich White, 20:10
- Re: Powder coating oven, Rush, 20:03
- RE: [SPAM] RE: Powder coating oven, Randall Young, 16:23
- Re: [SPAM] RE: Powder coating oven, Rush, 16:03
- Re: Powder coating oven, Rush, 14:16
- RE: Powder coating oven, Landaiche Kenneth (NET-BBS/Petaluma), 14:14
- Re: Powder coating oven, Rush, 13:20
- Re: Sinking cottage, epetrevich, 07:05
October 01, 2001
- RE: Sinking cottage, Landaiche Kenneth (NET-BBS/Petaluma), 16:34
- Re: Sinking cottage, Brian Kennedy, 15:26
- Re: Sinking cottage, Trevor Boicey, 15:13
- Re: Basement floor, George Castleberry, 11:20
- RE: Sinking cottage, Landaiche Kenneth (NET-BBS/Petaluma), 10:53
- RE: Basement floor, Landaiche Kenneth (NET-BBS/Petaluma), 10:45
- Re: Sinking cottage, David Scheidt, 06:35
- Re: Sinking cottage, Donald H Locker, 05:22
- Re: Powder coating oven, Randall, 00:39
- Re: Sinking cottage, Randall, 00:24