Thomas,
I believe Rich is correct.
I researched the M setup a bit when installing it on my car, and I fitted
the same bracket enlarging the holes.
Also, there was no extra bracket in LeMans kit, AFAIK.
Tadek
Message: 11
Date: Mon, 1 Aug 2011 14:49:14 +0200
From: "Thomas Willig" <twillig at ruda.de>
To: "Rich Chrysler" <richchrysler at quickclic.net>
Cc: healeys at autox.team.net
Subject: Re: [Healeys] Looking for 100M Choke abutment bracket
Rich,
no that's not the case (as far as I see it-enlightenment very welcome). The
angle of the bracket has to be changed as well. Doing this, you have to cut
the bracket were the abutment pin (the pin that fixes the outer control
cable to the bracket) goes through the bracket.
Thomas
|