Re: 1500 Bottom End Rebuild

[Adrian Jones <AdrianJones@compuserve.com>]

Adrian,

Thanks for the clarification.  I'll try moving the crank with a crow bar
and measuring the gap

Regards,  Adrian

Message text written by "J. Adrian Barnes"
>The Haynes manual wanted to measure drift with a feeler gauge, sliding t=
he
crank back and forth, to determine if they needed replacement.  With my n=
ew
ones, the only thing that drifted when I moved the crank side-to-side was=

the
entire block.  The allowed gap was quite small, so you might want to
measure
it.<