mgs
[Top] [All Lists]

Re: 1500 Bottom End Rebuild

To: MG <mgs@Autox.Team.Net>
Subject: Re: 1500 Bottom End Rebuild
From: Adrian Jones <AdrianJones@compuserve.com>
Date: Fri, 17 Oct 1997 09:14:04 -0400
Ahoy Matey,

Thanks for the tip!!.  Went out and got some from the autostore.

Message text written by "A. B. Bonds"
>Make SURE that when you reinstall the bearings you use assembly lube.
This is a very thick moly grease available from speed shops and parts
stores.  An engine can run for a minute or two on just this stuff
(without oil pressure) and it helps the breakin.<


<Prev in Thread] Current Thread [Next in Thread>