Re: 1500 Bottom End Rebuild

To:	MG <mgs@Autox.Team.Net>
Subject:	Re: 1500 Bottom End Rebuild
From:	Adrian Jones <AdrianJones@compuserve.com>
Date:	Fri, 17 Oct 1997 09:14:14 -0400

Bob,

Thanks for the info.  I'm just going to change the big end bearing this
time around and see if it helps the oil pressure. =


Regards,   Adrian

Message text written by ROBERT G. HOWARD
>You can
change the mains  by loosening the caps and pushing out the upper bearing=

shell with a screwdriver or probe of some sort. <

<Prev in Thread]	Current Thread	[Next in Thread>
1500 Bottom End Rebuild, Adrian Jones Re: 1500 Bottom End Rebuild, J. Adrian Barnes Re: 1500 Bottom End Rebuild, Adrian Jones Re: 1500 Bottom End Rebuild, Art Pfenninger Re: 1500 Bottom End Rebuild, Adrian Jones Re: 1500 Bottom End Rebuild, Adrian Jones Re: 1500 Bottom End Rebuild, Adrian Jones Re: 1500 Bottom End Rebuild, Adrian Jones Re: 1500 Bottom End Rebuild, Adrian Jones <= Re: 1500 Bottom End Rebuild, Adrian Jones Re: 1500 Bottom End Rebuild, Adrian Jones Re: 1500 Bottom End Rebuild, Adrian Jones 1500 Bottom end rebuild, Adrian Jones Re: 1500 Bottom end rebuild, Trevor Boicey Re: 1500 Bottom end rebuild, Adrian Jones Re: 1500 Bottom end rebuild, Carol Re: 1500 Bottom end rebuild, A. B. Bonds Re: 1500 Bottom end rebuild, Skye Poier

Previous by Date:	Re: 1500 Bottom End Rebuild, Adrian Jones
Next by Date:	Re: 1500 Bottom End Rebuild, Adrian Jones
Previous by Thread:	Re: 1500 Bottom End Rebuild, Adrian Jones
Next by Thread:	Re: 1500 Bottom End Rebuild, Adrian Jones
Indexes:	[Date] [Thread] [Top] [All Lists]