mg-mmm
[Top] [All Lists]

Re: Clutch

To: jasper@enternet.com.au, mg-mmm@autox.team.net
Subject: Re: Clutch
From: Kellmg@aol.com
Date: Mon, 23 Apr 2001 22:49:18 EDT
Reply-to: Kellmg@aol.com
Sender: owner-mg-mmm@autox.team.net
In a message dated 04/23/2001 2:55:11 AM Central Daylight Time, 
jasper@enternet.com.au writes:


> I've just done almost the same things, and I'm about to refit the engine
> now: you're worrying me!
> 
> Is it possible that the clutch driven plate is dragging on the pressure
> plate due to either contamination on the faces, or friction on the splines?
> What about the spigot bearing: could there be drag there?
> 
> Nothing to do with the problem, but how much did you lighten the flywheel? I
> worked to the drawing published by the MMM and others which is said to be
> the Works instruction for lightening the P-type. This reduced our flywheel
> from 11Kg to 7Kg.
> 
> 

Dave,

Same drawing. Lightens by 9lbs [real money]

Well, I think you came up there with the only three possibilities. I'm 
tending to think more to the side that the driven plate is binding on the 
pressure plate. I'm certain it's disengaging from the flywheel. I can see the 
centre of the driven plate moving on the splines. As you say it could be 
still binding on the pressure plate. You guys who have also installed sealed 
bearings on the spigot shaft and yet to try it should be OK. 

Started taking the box out today, but the call of $1.00 beers at the local 
brewery on Mondays gets the better of me. No, I didn't install the clutch on 
a Monday!!! Maybe I should have done.

I'll have it out and stripped for inspection tomorrow. 

More to follow.

Brian Kelly.
British Cars Web: http://www.team.net/sol
MMM list subscription info: http://www.team.net/cgi-bin/majorcool

<Prev in Thread] Current Thread [Next in Thread>