tvr
[Top] [All Lists]

Re: Tuning 2500

To: "Hill, Stephen M EDUC:EX" <Stephen.Hill@gems7.gov.bc.ca>
Subject: Re: Tuning 2500
From: Skip Gurnee <skip47@home.com>
Date: Fri, 16 Jun 2000 15:39:56 -0700
Stephen-
Moss Motors is your ultimate source for anything Triumph (or MG or Jag)
in the U.S.  Go to - 
http://www.mossmotors.com 
They're in Goleta, Ca., a little nw of L.A., and I believe also in N.J.
There are a few other sources, or were a few years ago when I was
Triumphantly active, which I'll look up and send if you want/need them.
Best,
Skip Gurnee

"Hill, Stephen M EDUC:EX" wrote:
> 
> Thanks John. By the way, I checked out your website (again) and see it is
> slowly being added to. Good work!
> 
> Are you aware, or anybody else on the list, what differential ratios are
> readily available for the TR6 diff cars? I have the 3.46:1 ratio, and the
> standard TR6 3.7:1, but I am looking for something numberically higher
> (4.1:1 or 4.3:1). What cars did they come in, and how tough is it to find
> them?
> 
> Stephen
> > ----------
> > From:         Dr John Upham[SMTP:webmaster@ukmotorsport.com]
> > Reply To:     Dr John Upham
> > Sent:         Thursday, June 15, 2000 3:49 PM
> > To:   Skip Gurnee
> > Cc:   Hill, Stephen M EDUC:EX; tvr@autox.team.net
> > Subject:      Re: Tuning 2500
> >
> > Skip Gurnee wrote:
> > >
> > > Steve-
> > > BDA is a generic term for a series of Ford 4-cylinder engines based on a
> > > design that goes back to the early/mid 60's.
> >
> >   BDA stands for Belt Drive Series A
> >
> >   hence BDG, BDX etc etc.
> >
> > Atop a basically stock
> > > block is placed a 4-valve-per cylinder head with two belt-driven cams.
> > > The original cam is cut just behind the oil pump to reduce weight and
> > > friction.  There are a zillion variations from 1100cc to about 2000cc,
> > > with power from 120 to nearly 300, all naturally aspirated.  Most of the
> > > engines are for racing only, due to their incredible prices and limited
> > > life, but there are road versions.  Dave Bean Engineering have a "Road
> > > Conversion Kit" the BDR, which purports to last long enough for road
> > > use. Check out their web site http://www.davebean.com for more
> > > information.
> > > Best,
> > > Skip Gurnee
> > >
> > > "Hill, Stephen M EDUC:EX" wrote:
> > > >
> > > > Okay, so what is a BDA? I am assuming this is not a female parts
> > washer!
> > > >
> > > >
> >
> >   Regards,
> >   JU
> >
> > --
> > Dr John Upham, The UKMotorSport Index,
> > http://www.ukmotorsport.com/, webmaster@ukmotorsport.com,
> > Voice: +44 (0) 976 634 053 (W), Voice: +44 (0) 125 287 2551 (H),
> > Voice: +44 (0) 976 634 053 (M)
> >

<Prev in Thread] Current Thread [Next in Thread>