The square pad welded to the axle tube which was the leaf spring
mounting point was in a different place, and the 4A had pads welded top
and bottom. Other than that, they were pretty well the same, and the
innards were virtually identical..
Bill McLeod
Slightly Classics
Tucson, AZ
Mike Kitchener wrote:
>Russ Locke wrote :
>
> > Will a complete '67TR4A live axle fit my '64 TR4?
>
>Russ ,
>If you can believe the Moss UK catalog , it states that the only difference
>is in the drive input flange , square for the 4 , round for the 4A , which
>seems strange as
>the prop shaft is the same for both .
>
>HTH
>
>Mike
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|