spitfires
[Top] [All Lists]

RE: MK II Rear Window Seal

To: "'Philip Johnson'" <spitfire.man@ntlworld.com>,
Subject: RE: MK II Rear Window Seal
From: Chris De Wet <DeWetC1@sapo.co.za>
Date: Mon, 11 Sep 2000 12:37:25 +0200
Philip

Are the correct seals no longer available from John Kipping ( UK ) ? My
catalogue suggest that John K. may be able to assist .

Kind regards
Chris de Wet
P O Box 472 , Ifafi  , 0260  ,  South Africa  .
Telephone 012 - 3398071 ( office ) 012 - 2591129 ( home ) Cell 0839989744
Fax 012 - 3398118
One '56 TR 3 with o/d and one '64 Spitfire 4 ( Mk 1 )
Two Heralds and three early Spitfires without o/d for sale in order to
finance the restoration of the TR 3 .

-----Original Message-----
From: Philip Johnson [mailto:spitfire.man@ntlworld.com]
Sent: Saturday, September 09, 2000 8:43 PM
To: Greg Thorsley; Spitfire
Subject: Re: MK II Rear Window Seal




Greg,

I used a TR4/5 Surrey top rear window seal on my hardtop. The top and bottom
two curves in the rubber were about in the right place for the spitfire rear
screen. I cut two lengths out either side and glued the seal together with
superglue. Once fitted, it is hard to see the joints and is about the right
profile for the seal. Also when fitted, the chrome strip helps keep the
joins together. The rear screen seal was never that good a fit and I would
recommend using some of that black none setting windscreen sealant in the
glass channel and under the seal where it touches the hardtop.

Regards
==
Phil Johnson
Coventry UK
Club Triumph (UK) Spitfire/GT6 Secretary
http://www.club.triumph.org.uk/

66 Spitfire4 Mk2 FC73949
77 TR7 ACG10378A Ongoing Sprint Conversion
----- Original Message -----
From: Greg Thorsley <Gregory.Thorsley@montage.ca>
To: Spitfire <spitfires@autox.team.net>
Sent: Saturday 09 September 2000 16:52
Subject: MK II Rear Window Seal


> Hi,
>
> I have asked this before but my mail archive became corrupted and I lost
> the information that was forwarded so forgive me for posting this
> question again.  I believe that some people have been successful in
> using a TR3 rear window seal to replace the seal in a MKII hardtop.  Is
> this correct?
>
> The MKII seal is no longer available and the one I have is very cracked.
>
> Picture of my car.
> http://www.telusplanet.net/public/gthorsle/spitfire.jpg



The information contained in this e-mail including any attachments is
privileged and/or confidential.  If you are not the intended recipient
please reply immediately and delete this message.  Please do not make use of
it, nor disclose it's contents in any way.  Thank you. 



<Prev in Thread] Current Thread [Next in Thread>