I had replaced my original pump with a Viair 325. I also installed an inline
fuse. If the tank is empty and I try to pump it up I am blowing the fuse and
the wire is getting hot. I feel I need to use a thicker wire with this pump
as compared to the other one since the amp draw appears to be higher. I could
not find any information on Viair site, but found a install kit with a 12
gauge wire. What would someone recommend for a replacement wire and inline
fuse amperage.
Greg 0036
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin
http://www.team.net/archive
|