mg-mmm
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

re: Re: MMM Engine Numbers

from [Thomas L Metcalf] [Permanent Link][Original]
To: Bill707@aol.com, lpalmer@mn.mediaone.net, mg-mmm@autox.team.net
Subject: re: Re: MMM Engine Numbers
From: Thomas L Metcalf <MGtom@bright.net>
Date: 11 Nov 100 10:36:55 Eastern Standard Time
Cc: mgtom@bright.net, Bill707@aol.com, TATERRY@aol.com
Reply-to: Thomas L Metcalf <MGtom@bright.net>
Sender: owner-mg-mmm@autox.team.net 
Lew,

You know, later PA blocks had thicker cyl walls and happily can be bored to 
60mm. I don't know if this would be the reason behind the 135 series number but 
your machine shop can tell you your wall thickness. Don't panic yet!   t


British Cars Web: http://www.team.net/sol
MMM list subscription info: http://www.team.net/cgi-bin/majorcool
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  numbers, mgwizard
Next by Date:  Re: P type gear sets, JASON BAZZICA
Previous by Thread:  RE: MMM Engine Numbers, Lew Palmer
Next by Thread:  P/N gears, Andrew Fock
Indexes:  [Date] [Thread] [Top] [All Lists]