triumphs
[Top] [All Lists]

RE: Herald clutch slave cylinder

To: etiesele@metrolist.net, triumphs@autox.team.net
Subject: RE: Herald clutch slave cylinder
From: Randall Young <ryoung@NAVCOMTECH.COM>
Date: Mon, 23 Sep 2002 12:22:14 -0700
Kai is exactly right.  Don't know if I wasn't awake yet or what, but I can't
now find a TRF listing for GSY103 at all in the files I have here at work.
My apologies to all.

But, both TRF and Spit Bits have the 64068370 listed.

Randall

> -----Original Message-----
> From: Kai M. Radicke [mailto:kai@radiohead.net]
>
> GSY103 and 3010166 are not the same cylinder.  GSY103 is the .875
> (7/8) inch
> cylinder ... while my Girling catalogue lists 3010166W as only being .75
> (3/4) inch in diameter.  The Girling number for GSY103 is 64068370, while
> the TRF number listed is the Girling number for that cylinder less the
> prefix.
>
> Here is the data straight out of my Girling catalogue:
>
> Herald, 1959-1961                                    3010166W
> Herald 1200, 1961-1967                            3010166W
> Herald 1200 (from #53670), 1967-1970       64068370
> Herald 1250, 1963-1967                            3010166W
> Herald 1250 (from #GB54349), 1967 on      64068370
>
> Spitfire MKI and MKII used 3010166W, while the later Spitfires (MKIII and
> MKIV) used 64068370.  I should note, that it seems common that the change
> over point on all the Heralds and Spitfires seems to be September of 1967
> for the switch from the smaller bore cylinder to the larger.
>
> Kai

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>