Message text written by "BILL BREWER"
> I have a TR6 OD trans in my TR3. I am putting the
trans hump back in and the cable drive on the right side of
the OD rubs against the hump. It is a 90 degree sending
unit thing. I have tried pounding the hump for more
clearance, but it still needs more and I am afraid to bang
on the hump any more. Do I have the wrong type of speedo
drive or something? What should go there? Where would I
find the right thing? I can still make the hump fit, but
the speedo drive would be rubbing pretty hard against the
hump housing. Would this be okay?
<
Bill the TR3 has a notch in the floor for the long speedo cable that is
used without the angle drive. A rubber boot covers the cable and seals the
parking brake lever. Take the angle drive off, sell it on E-bay and use
the proceeds to buy a long speedo cable.
Cheers
Dave
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|