At 01:58 PM 4/24/02 -0700, BILL BREWER wrote:
> I have a TR6 OD trans in my TR3. I am putting the
>trans hump back in and the cable drive on the right side of
>the OD rubs against the hump. It is a 90 degree sending
>unit thing. I have tried pounding the hump for more
>clearance, but it still needs more and I am afraid to bang
>on the hump any more. Do I have the wrong type of speedo
>drive or something?
No.
>What should go there?
There is a metal cover that belongs there when you have overdrive and the
angle speedo drive. It is listed in many catalogs but is no longer available.
>Where would I find the right thing?
Maybe someone has one they don't need. Or else, you could try to fabricate
a replacement.
>I can still make the hump fit, but
>the speedo drive would be rubbing pretty hard against the
>hump housing. Would this be okay?
It wouldn't be my first choice.
Irv Korey
74 TR6 CF22767U (overdrive and speedo drive cover added later)
63 TR4 VSCDA Group 2 # 58
Highland Park, IL
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|