Aribert_Neumann%MIMCO@magna.on.ca wrote:
>
> I replaced the original control arm bushings (bolt rusted in bushing, had
> to be cut out) three of four years ago - 20,000 miles. The new bushings
> have failed to such an extent that my front alignment went out last year
> and I have significant tire wear. I expect more that 3 years on a
> suspension bushing. I am considering polyurethane bushings. I have always
> heard that polyurethane bushings squeak. How loudly will they squeak?
> Will I be able to hear this over the front bonnet rattles when driving at
> low speeds on somewhat rough roads? I have seen these parts advertised at
> British Parts NW. Any one bought these (Spitfire) front suspension
> bushings? Do these bushings have a metal sleeve on the ID. Other
> recommendations for poly suspension bushings?
I rebuilt my spit suspension with poly bushings from BPNW.Having no
instruction,I just pressed them in and put it all back together.The
creaking from the front end is VERY LOUD!I have since learned that I
should have smeared the bushings with anti seaze compound prior to
installation.So now I have another project for this winter.
Rick Hand
70 Spitfire
67 Sports 1200 Saloon
|