triumphs
[Top] [All Lists]

Re: Starting an engine on Jackstands

To: tigerpb@ids.net
Subject: Re: Starting an engine on Jackstands
From: "Jack I. Brooks" <brooks@belcotech.com>
Date: Fri, 16 May 1997 08:01:11 -0400
Cc: Triumphs@Autox.Team.Net
At 06:36 PM 5/15/97 +0100, Paul Burr wrote:
>Jack I. Brooks wrote:
>> 
>> Hey List
>> 
>> Is it dangerous (or stupid) to start a TR3's engine with the car up on
>> jackstands?  The frame is about 15 inches off the virtually level concrete
>> floor, I've got four 2 1/2 ton stands, two on the rear axle, two on the
>> frame near the engine.
>> 
>> I'd sure hate for the car to fall off, but the car is solidly on the stands.
>
>YOu should be alright. I did a similar stunt on my Tiger, car on
>jackstands, no front crossmember. No exhaust system past the headers
>either! Can you say loud? I knew you could! The car stay put, but all
>the neighbors jumped 10 feet.

Paul,

Thanks.  I just want to make sure the new bearings don't detonate, the
tranny works and check for leaks, etc.  It's just a lot easier than putting
it back up if there is a problem.

Later, and enjoy the Tiger, if you still have it.  Nice car! 

Jack



<Prev in Thread] Current Thread [Next in Thread>