I am about to replace the cylinder head on my TR4. Found a crack in
the original one after blowing the gasket a couple of weeks ago.
What a bummer suffering serious down time in the middle of summer!
Fortunately I found a couple of places with rebuilt heads on the shelf
so I hope to be motoring again soon!!
Anyway, I have just a couple of questions. Does anyone know the
significance of the numbers stamped on the head. There are 2: one
on the top, in my case "H220", and one on the side "302137". Just
curious to know what these mean.
Also I would welcome any general wisdom about pitfalls to avoid,
tweaks to be made, or any other insights from those of you who have
done this before.
Thanks,
---------------
Charlie Farwell
1962 TR4 #CT3852L
|