At 09:42 AM 08/05/2002 -0700, ralemen@cableone.net wrote:
>Many thanks to those that replied.
>
>FYI. The seat foams were replaced a month or two back before my vacation
>trip and all was fine and clean at that point. Never actually inspected
>the teeth that closely at the time. But I don't recall anything untoward
>looking.
>I suspect the mechanism due to the symptoms - I can release the lever and
>it allows movement and sort of locks but then, with that force exerted
>upon acceleration, it slips.
>
>Alan
My passenger seat was like that. It was a broken seat frame just above the
locking mechanism. I ended up inserting a small pipe inside the frame and
using that too hold the weld. It hand been welded/brazed poorly before that.
Andy L.
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|