spitfires
[Top] [All Lists]

prop/drive shaft

To: <spitfires@autox.team.net>
Subject: prop/drive shaft
From: "Lambert, Iain" <Iain.Lambert@compaq.com>
Date: Wed, 12 Jun 2002 11:40:07 +0100
Listers,

        I have decided to renew the u/v joints on my 1972 mark 4 Spit,
the vibration as I lift off the throttle at around 50 mph is getting
pretty uncomfortable ( seems worse with the hood up). Is there
anything I should know about removing the drive shaft in particular
that might cause me serious grief. Any wee tips and advise very much
appreciated.

 Thanks in anticipation.

Regards, 
Iain Lambert.
Macfarlane group packaging
Inside Hewlett Packard
e mail:       iain.lambert@compaq.com
TEL:              0141 814 7292
MOBILE:       07801622031
HOME:          01292 618784



<Prev in Thread] Current Thread [Next in Thread>