I just checked my Spit and found that the wire for the electric choke is
connected to the black terminal of coil, connected to the same side as the
condenser is connected.
Email me off line and I'll email you a pic.
-----Original Message-----
From: spitfires-owner@autox.team.net
[mailto:spitfires-owner@autox.team.net]On Behalf Of Bowen, Patrick
Sent: Monday, March 04, 2002 9:46 AM
To: 'spitfires@autox.team.net'
Subject: Weber DGAV choke connection
I asked a few weeks ago and didn't get a response so I thought I would try
again. Where on a 1500 is it best to connect the electrical choke
connection? It must be a connection which is only hot when the key is on,
or even better only hot when the engine is running. Any ideas.
Patrick Bowen
* Confidentiality Notice * The information in this e-mail/facsimile
transmission is intended by intellinetics, Inc. for use only by the
individual or entity to which it is addressed. This message may contain
information that is privileged or confidential. If you are not the intended
recipient, you are hereby notified that any dissemination, distribution or
copy of this e-mail/facsimile is strictly prohibited. If you have received
this transmission in error, please delete it from your system without
copying or forwarding it, and notify the sender of the error by reply e-mail
or by calling 614-921-8170. Thank You * intellinetics, Inc. * 2190 Dividend
Drive * Columbus, OH 43228 * Phone: (614) 921-8170 * www.intellinetics.com
* Fax: (614) 850-2789
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
|