Bob Howard wrote:
> The washer-looking thing is a spacer made of a hard white plastic,
> Delrin, I believe. Its fit is snug in the bore and I don't believe you
> can get it to come out by banging it on a board; I could not do it. I
> drilled it and screwed in a self tap screw, which I could then hook and
> pull on to remove the spacer.
>
Yes, I discovered that last night, did the same & it worked.
> These MCs are difficult to work on, and I have not been able to get
> them to not leak. Unless you fancy the challenge of it all, you might
> want to buy a new one and be done with the hassle.
I'm going to Sears today to buy the long-nosed circlip pliars. I will be honing
the bore before reassembling.
-The Roxter
--
_______________________________________________
Edit your replies
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
|