The washer-looking thing is a spacer made of a hard white plastic,
Delrin, I believe. Its fit is snug in the bore and I don't believe you
can get it to come out by banging it on a board; I could not do it. I
drilled it and screwed in a self tap screw, which I could then hook and
pull on to remove the spacer.
These MCs are difficult to work on, and I have not been able to get
them to not leak. Unless you fancy the challenge of it all, you might
want to buy a new one and be done with the hassle.
Bob
On Wed, 22 Aug 2007 15:51:17 -0500 The Roxter <rocknatural@gmail.com>
writes:
> My Victor uses an MGB Brake Master Cylinder, the kind with the big
> cylindrical reservoir that leans forward, with the big round cap.
_______________________________________________
Edit your replies
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
|