James Nazarian wrote:
> If the ring doesn't come out easily I usually drill a series of holes in it
> until I can break it apart and extract the bits with tweezers.
>
> In my experience, the only rebuilds that are successful are those where the
> MC was working when the car was parked and the seals disintegrated due to
> age. If the MC is worn to the point of leaking, then the bore is typically
> worn enough that a rebuild won't last more than a few months. For all the
> hassle of installation, I'd just replace it unless you know for sure that it
> was working prior to the car being laid up for decades.
>
I'm going to give it a try, but I'm going to hone the bore before reassembling.
-The Roxter
--
_______________________________________________
Edit your replies
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
|