mark.jones@exxonmobil.com wrote:
> It's been 6 years since I rebuilt the brake m/c in my 73 GT (the same one
> as you are doing) and don't recall having any problems taking it apart,
> even getting the spacer out (I think I used a dental tool). The cir-clips
> can be a problem and I did buy a good quality set of cir-clip pliers (with
> long nose) which made getting the clips out easy.
>
> As David said, you have to get the guts out before you can assess the
> condition of the cylinder bore, fortunately mine was rebuildable.
>
> There are several good m/c rebuilds, who can resleeve the cylinder in brass
> or stainless steel, another option if you don't want to buy new.
> Personally I think resleeving in stainless steel is a good idea, should be
> a permanent fix in terms of the bore.
If it's too bad to just hone it, I'm planning to do exactly that.
-The Roxter
--
_______________________________________________
Edit your replies
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
|