Sorry Bob, that is NOT correct. If that is what you found, someone had
already changed it. The clamp is lower case "d" shaped, in brass and the
pipes originally went THROUGH the front engine bearer plate. Jarl de
Boer
~~~~~~~~~~~~~~~~~~~~~~~~~
ROBERT G. HOWARD wrote:
>
> Steve,
> They run from the carb bowls forward and down toward the forward engine
> mounting plate. After passing over it, they then bend to straight down,
> and are clamped my a little "M" shaped piece that has a bolt through
> the middle. If you see an empty hole in the plate, one that appears to
> accept about a 3/16" bolt (but it's the ww size, of course) that's the
> hole.
> Bob
>
> On Thu, 30 Apr 1998 08:31:03 -0400 Steven Tritle <stritle@epix.net>
> writes:
> >Is there a clamp to hold the carb overflow tubes to the frame or do
> >they
> >simply "hang free"?
> >Steve
> >52 TD
> >
> >
|