Rich -
That bearing is pretty tough - it is a double row bearing.
It will come out easy by using your bench vise and a large socket as a
press against the inner race.
Alan
On 9/21/10, Richard Kahn <tahoehealey@hotmail.com> wrote:
> I have been having a drip that has gotten worse over the last year. A few
> years ago I replaced the paper gasket and it helped for a while. I could not
> get the bearing out at that time to replace the seal. Now I have no choice.
> Is
> there a simple way to get it out with out ruining the bearing?
> Thanks,
> Rich Kahn
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|