spridgets
[Top] [All Lists]

Re: Steering rack bracket

To: "Brad Fornal" <tequila.brad@gmail.com>, "Phil Nase" <nase@ptd.net>
Subject: Re: Steering rack bracket
From: "MICHAEL CARPENTER" <MAIL4CARPENTERS@peoplepc.com>
Date: Sun, 14 Jan 2007 11:05:42 -0500
I have taken apart about 10 Bugeyes and an even greater number of 
side-curtain Spridgets.  Yes, there is a paper like gasket under the 
steering rack brackets on Spridgets that are original.  It almost seems like 
a wax impreg paper.

MC
----- Original Message ----- 
From: "Brad Fornal" <tequila.brad@gmail.com>
To: "Phil Nase" <nase@ptd.net>
Cc: "Spridgets List" <spridgets@autox.team.net>
Sent: Sunday, January 14, 2007 9:43 AM
Subject: Re: Steering rack bracket


> The only spacer I have ever seen, on ALL Spridgets, including the 60
> Bugeye that has a slight start to RHD status, was the metal spacer
> about 1/4" thick. This cants the rack enough to accommodate the fact
> that the column does not go straight into it from the instrument
> panel.
>
> On 1/14/07, Phil Nase <nase@ptd.net> wrote:
>> I thought when I took the steering rack off the BE there were paper 
>> gaskets
>> between the steering rack brackets and the chassis.  I don't see a 
>> reference
>> to them in any book.
>>
>> Do they just bolt up to the frame w/o any material in there?
>>
>> Phil Nase
>> Quakertown, PA




<Prev in Thread] Current Thread [Next in Thread>